Human-Induced Neural and Mesenchymal Stem Cell Therapy Combined with a Curcumin Nanoconjugate as a Spinal Cord Injury Treatment

We currently lack effective treatments for the devastating loss of neural function associated with spinal cord injury (SCI). In this study, we evaluated a combination therapy comprising human neural stem cells derived from induced pluripotent stem cells (iPSC-NSC), human mesenchymal stem cells (MSC), and a pH-responsive polyacetal–curcumin nanoconjugate (PA-C) that allows the sustained release of curcumin. In vitro analysis demonstrated that PA-C treatment protected iPSC-NSC from oxidative damage in vitro, while MSC co-culture prevented lipopolysaccharide-induced activation of nuclear factor-κB (NF-κB) in iPSC-NSC. Then, we evaluated the combination of PA-C delivery into the intrathecal space in a rat model of contusive SCI with stem cell transplantation. While we failed to observe significant improvements in locomotor function (BBB scale) in treated animals, histological analysis revealed that PA-C-treated or PA-C and iPSC-NSC + MSC-treated animals displayed significantly smaller scars, while PA-C and iPSC-NSC + MSC treatment induced the preservation of β-III Tubulin-positive axons. iPSC-NSC + MSC transplantation fostered the preservation of motoneurons and myelinated tracts, while PA-C treatment polarized microglia into an anti-inflammatory phenotype. Overall, the combination of stem cell transplantation and PA-C treatment confers higher neuroprotective effects compared to individual treatments.     

Direct-Ink-Writing of Electroactive Polymers for Sensing and Energy Storage Applications

Considering the high levels of materials used in the fields of electronics and energy storage systems, it is increasingly necessary to take into consideration environmental impact. Thus, it is important to develop devices based on environmentally friendlier materials and/or processes, such as additive manufacturing techniques. In this work, poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) are prepared by direct-ink-writing (DIW) by varying solvent evaporation temperature and fill density percentage. Different morphologies for both polymers are obtained, including dense films and porous membranes, as well as different electroactive β-phase content, thermal and mechanical properties. The dielectric constant and piezoelectric d₃₃ coefficient for dense films reaches up to 16 at 1 kHz and 4 pC N⁻¹, respectively for PVDF-HFP with a fill density of 80 and a solvent evaporation temperature of 50 °C. Porous structures are developed for battery separator membranes in lithium-ion batteries, with a highest ionic conductivity value of 3.8 mS cm⁻¹ for the PVDF-HFP sample prepared with a fill density of 100 and a solvent evaporation temperature of 25 °C, the sample showing an excellent cycling performance. It is demonstrated that electroactive films and membranes can be prepared by direct-ink writing suitable for sensors/actuators and energy storage systems.     

Global insight into microwave stoneware firing: Macro and microstructural changes

Industrial competition and environmental concerns lead to the exploration of alternative and energy-efficient technologies for ceramic materials processing. The main objective of this work was to present microwave heating as a viable option for stoneware processing. Stoneware functional properties are presented and discussed, with emphasis on impact strength, water absorption, porosity, and color. Microstructure analyses show that microwave- and gas-fired samples have higher densifications than electrically fired samples. A relevant finding for processing conditions is that microwave firing requires temperatures approximately 100°C lower than those required by conventional firing. Microwave-fired samples’ rupture energies are approximately twice (0.57 ± 0.06 (J)) those of the reference samples (0.26 ± 0.03 (J)), and their water absorptions are approximately one-half (1.5% at 1170°C and 0.8% at 1190°C) of those of the reference samples (2.0%), whereas the water absorption of electrically fired samples at 1180°C has been estimated to be 7.5%. Color analysis also evidences a shift to lower microwave firing temperatures, what is attributed to the enhanced transformations promoted by microwave heating when comparing with the transformations promoted by conventional (gas or electric) heating.     

Surface Pretreatments of Silicon Nitride for CVD Diamond Deposition

The efficiency of different surface pretreatments (four standard chemical etchings and four diamond powder abrasive procedures) on silicon nitride (Si₃N₄) substrates for chemical vapor deposition (CVD) of diamond has been systematically investigated. Blank Si₃N₄ samples were polished with colloidal silica (∼0.25 μm). Diamond nucleation and growth runs were conducted in a microwave plasma chemical vapor deposition apparatus for 10 min and 6 h, respectively. Superior results concerning nucleation density ( N _d∼ 10¹⁰ cm⁻² after 10 min), film uniformity, and grain size (below 2 μm after 6 h) were obtained for the mechanically microflawed samples, revealing that chemical etchings (hot and cold strong acids, molten base or CF₄ plasma) are not crucial for good CVD diamond quality on Si₃N₄.     

Supported Molybdenum Carbides Lie Between Metallic and Sulfided Catalysts for Deep HDS

Hydrodesulfurization (HDS) of 4,6-dimethyldibenzothiophene on alumina-supported Mo₂C has been studied. These catalysts are stable and active under deep HDS conditions (0-250 wt ppm S). However, although they are well known to have hydrogenation properties, they lead preferentially to a non-hydrogenated product of the HDS reaction: dimethylbiphenyl. For the same reaction, supported platinum and sulfided molybdenum oxide lead to the hydrogenated products dimethyldicyclohexyl and methylcyclohexyltoluene, respectively. The ranking of HDS activity is as follows: MoS₂/Al₂O₃ < Mo₂C/Al₂O₃ < Pt/SiO₂.     

A two-step reaction mechanism of oxygen release from Pd/CeO2: mathematical modelling based on step gas concentration experiments

Topics in Catalysis - A mathematical model has been developed to study the transient release of oxygen from a 1 wt% Pd/CeO2 catalyst in the 450–550&nbsp;°C range based on alternate...     

Transient measurements of adsorption and diffusion in H-ZSM-5 membranes

A transient permeation method presented here not only determines the adsorption and diffusion properties of the pores that are the transport pathways through zeolite membranes, but nondestructively estimates the effective thickness of the membrane. Transient responses of the permeate concentration to step changes in the feed were measured on two H-ZSM-5 tubular membranes and modeled assuming Maxwell-Stefan diffusion and Langmuir adsorption. The adsorption isotherms determined from these transient measurements at 298 K of N₂ and CO₂ were nearly identical to those measured by calorimetry on H-ZSM-5 powders. The CH₄ isotherm at 298 K was similar to isotherms measured by calorimetry and gravimetric techniques on Na-ZSM-5 and silicalite powders. The similarity of the isotherms indicates that transport of these light gases occurs mainly through zeolite pores. The Maxwell-Stefan diffusion coefficients D_MS depended on concentration and were higher for higher feed partial pressures. Average D_MS values for the two membranes were 7.5, 5 and 1.5×10⁻¹⁰ m²/s for N₂, CH₄, and CO₂, respectively; these are in the same range and order as diffusion coefficients measured in zeolite crystals.     

Rice husk ash filled natural rubber. I. Overall rate constant determination for the vulcanization process from rheometric data

Black rice husk ash (BRHA) and white rice husk ash (WRHA) were incorporated into natural rubber (NR) using a laboratory‐size two‐roll mill. A conventional vulcanization system (CV) was chosen and cure studies were carried out on a TI‐100 Curometer. The torque curves were obtained at 150, 160, 170, and 180°C. The overall rate and the apparent activation energy for the vulcanization process were calculated for each compound assuming that vulcanization follows first‐order kinetics. For comparison purposes, two commercial fillers, precipitated silica (Zeosil‐175) and carbon black (N762), were also used. It was observed that addition of WRHA to NR compounds increased the cross‐linking rate and lowered the apparent activation energy more markedly than the other fillers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1194–1203, 2003     

Nanocomposites based on polyethylene and Mg-Al layered double hydroxide. I. Synthesis and characterization

Low density polyethylene (LDPE)/Mg-Al layered double hydroxide (LDH) nanocomposites have been synthesized with different compositions by melt-mixing technique using maleic anhydride grafted polyethylene as compatibilizer. LDH has been modified by sodium dodecylbenzene sulfonate using reconstruction method and characterized by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. The nanocomposites are characterized by different techniques such as, transmission electron microscopy (TEM), XRD and rheology. The TEM analysis shows a complex nature of particle dispersion in the polymer matrix with wide distribution of particles sizes and shapes. The rheological analysis showed significant changes in linear viscoelastic responses of the composites, even at very low concentration (2 phr) of LDH materials, in comparison to the pure polymer in low frequency regime in dynamic frequency sweep experiments. These changes are related to the LDHs-polymer chains interactions resulting in network-like structure.     

Effect of cold environment on hepatic microsomal Δ6 and Δ9 desaturase activity of male rats

Male rats maintained at 24 C and then shifted to 5 C for 5 days increased food intake and decreased in growth rate and food conversion. No modification was observed in Δ6 desaturase activity, while Δ9 desaturase activity decreased after this period of time. These results were confirmed by liver microsomal and mitochondrial fatty acid composition. The phospholipid composition of liver microsomes was unaltered, whereas in mitochondria, phosphatidylcholine and sphingomyelin decreased and phosphatidylethanolamine increased due to the cold environment. The influence of food intake and weight changes on fatty acid metabolism was studied using (i) rats maintained at 5 C with restricted food intake to match the food intake of those kept at 24 C with food ad libitum and (ii) rats maintained at 24 C whose food intake was also restricted so that their growth rate would be the same as that of rats maintained at 5 C with food ad libitum, respectively. These results indicate that the negative metabolic balance state of these cold conditions is not an active factor modifier of Δ6 desaturase activity, whereas it decreases Δ9 desaturase activity, reflecting the lipogenic characteristics of the latter enzyme.