Preference-based multi-objective evolutionary algorithms for power-aware application mapping on NoC platforms

Network-on-chip (NoC) are considered the next generation of communication infrastructure in embedded systems. In the platform-based design methodology, an application is implemented by a set of collaborative intellectual property (IP) blocks. The selection of the most suited set of IPs as well as their physical mapping onto the NoC infrastructure to implement efficiently the application at hand are two hard combinatorial problems that occur during the synthesis process of Noc-based embedded system implementation. In this paper, we propose an innovative preference-based multi-objective evolutionary methodology to perform the assignment and mapping stages. We use one of the well-known and efficient multi-objective evolutionary algorithms NSGA-II and microGA as a kernel. The optimization processes of assignment and mapping are both driven by the minimization of the required silicon area and imposed execution time of the application, considering that the decision maker’s preference is a pre-specified value of the overall power consumption of the implementation.     

Effect of high temperature annealing on texture and microstructure on an AISI-444 ferritic stainless steel

AISI 444 is a Mo-alloyed ferritic stainless steel which presents good naphthenic corrosion resistance, making it attractive for applications in petroleum refining plants; however, good formability is also important. To achieve good formability with this alloy the annealing process is crucial. The annealing temperature in ferritic stainless steel is usually around 850 °C, which falls in the range of sigma phase precipitation. A means to avoid this precipitation is to anneal at temperatures around 1000 °C followed by rapid cooling. Annealing at high temperatures can cause grain growth and carbide or nitride precipitation which can result in a reduction of room temperature toughness. In this paper, the rolling and recrystallization textures of AISI 444 steel were studied in samples cold rolled with different thickness reductions (30%, 60%, 80% and 90%) followed by annealing at 955, 980 and 1010 °C. Aspects of grain size and carbide precipitation after annealing were characterized using EBSD and AFM. The material drawability was analyzed through strain rate or Lankford (r) coefficients calculated from texture results.     

Brazilian articles in international journals on Limnology

Summary  We assessed the contribution of Brazilian limnologists (freshwater ecologists) in international journals in the period 1970-2004. Brazilian contribution was low and regular in the 1970's, but increased steeply after 1980 with no signs of stabilization until the present. Articles authored by Brazilians tend to be less cited than articles authored by non-Brazilians, although this difference is reduced in co-authored articles with international researchers.  Brazilian articles are not distributed homogenously among the sub-areas of Limnology, but present some biases that can be explained by intellectual legacy. Brazil has invested since the 1970's in establishing postgraduate courses in Brazil and in the last years has turned the focus to a better qualification of these courses. We believe these are the main reasons for the conspicuous development of Brazilian Limnology.     

SNR gap approximation for M-PSK-Based bit loading

Adaptive OFDM has the potential of providing bandwidth-efficient communications in hostile propagation environments. Currently, bit loading algorithms use M-ary quadrature amplitude modulation of the OFDM sub-carriers, where the number of bits per symbol modulating each of them is obtained in order to maximize the performance. SNR gap approximation for M-QAM signaling makes the algorithms simpler to implement. However, in some circumstances it may be preferable to use. M-ary phase shift keying. In this letter an approximation is derived for M-PSK similar to the SNR gap of M-QAM so that bit loading algorithms can be extended to this type of modulation. In addition, the performance obtained when using M-PSK is compared to that of M-QAM in a practical situation.     

Pollution Buildup on Road Surfaces

Samples of sediment found on an urban road in Aberdeen (Scotland) were collected by washing designated surfaces. This method, called the “wet” method, was capable of collecting sediment of the smallest particle size range that is normally left behind by traditional sampling techniques using dry vacuuming. Over 17 months (mainly on a weekly basis), 66 samples were collected and analyzed for sediment loading, particle size distribution, concentration of heavy metals (Zn, Cu, Pb, Cd) in four sediment size fractions, and several dissolved pollutants in the effluent collected from washing (NO3?,?SO42?,?PO43?,?Cl?,?F?,?NH4+, total organic carbon, total carbon). Standard statistical methods, including multiple regressions, were used to determine relationships amongst different sediment characteristics. It was found that sediment loading, as well as concentrations of Cl? and SO42?, were highest in the winter months, especially when snow was present on the road surface. It was observed that 66% of total road sediment loading was found within a 0.5 m strip next to the curb. The average sediment particle sizes found were smaller than those previously recorded in the literature. As expected, the concentrations of heavy metals were highest in the smallest particle size fraction analyzed (<63?μm), and this occurred during the summer months when less sediment was available on the street surface. The antecedent dry weather period had a very weak and negative influence on the loading rate of the smallest particle size fraction next to the curb.     

Influence diagnostics in regression with complex designs through conditional bias

One of the areas of Statistics in which the influence analysis has been widely studied is the multiple linear regression model. Nevertheless, the influence diagnostics proposed in this context cannot be applied to regression in complex survey, under randomized inference, since the i.i.d. case does not incorporate any probability weighting or population structure, such as clustering, stratification or measures of size into the analysis. In this paper we introduce some influence diagnostics in regression in complex survey. They are built on the conditional bias concept (Moreno-Rebollo et al., 1999). We emphasize the similarities and differences of the proposed measures with respect to the existing ones for the i.i.d. case. Research partly supported by the Spanish MCYT grant BFM2001-3844 and Spanish MEC grant MTM2004-0111433.     

Probabilistic Approach to Predict Cracking in Lightly Reinforced Microconcrete Panels

The ultimate strength of structures made of brittle materials—such as microconcrete—strongly depends on microstructural defects, the structure size, and the loading pattern. Probabilistic approaches allow one to take account of such dependencies. By using a Weibull model, cracking of ferrocement panels is analyzed. Provided the behavior of the reinforcement remains elastic, it is shown that the Weibull parameters identified on unreinforced microconcrete samples tested in flexure may be used to predict multiple cracking in ferrocement panels tested in tension. A key aspect of the analysis is related to the understanding and modeling of the stress heterogeneity effect on the local failure probability of unreinforced as well as reinforced microconcrete by the use of a so-called Weibull stress.     

Pleurotusostreatus and Agaricus subrufescens: investigation of chemical composition and antioxidant properties of these mushrooms cultivated with different handmade and commercial supplements

In this study, the chemical composition, total phenolic content and antioxidant activity (DPPH, ORAC and FRAP assays) of A. subrufescens and P. ostreatus, cultivated with handmade and commercials supplements, were compared. Additionally, the compounds ergosterol, saccharopine, and hexitol were identified in A. subrufescens by HPLC-MS/MS. The antioxidant compound p-coumaric acid and dihexoses was found in both mushroom species. A. subrufescens presented higher total phenolic content (73.8 ± 0.6 mg GAE 100 g⁻¹) and antioxidant activity than P. ostreatus (16.6 ± 0.5 mg GAE 100 g⁻¹). The handmade supplement based on the waste of noble grains presented statistically similar phenolic content to the mushrooms cultivated with commercial ones Spawn Mate II SE (86.1 ± 1.4 and 92.9 ± 0.3 mg GAE 100 g⁻¹, respectively). Therefore, the results support the use of handmade supplements based on agro-wastes as a viable alternative to the use of high-cost commercial ones.