Occurrence of the mycotoxins ochratoxin A, zearalenone and deoxynivalenol in feed components.

The mycotoxin contamination of feed components used by the Dutch cooperative feed industry was surveyed to estimate the risk for animal production losses. Of 89 randomly and 6 selectively taken samples of raw materials harvested in 1988 and 1989 27% were contaminated with ochratoxin A (OCHRA), 31% with zearalenone (ZEA) and 20% with deoxynivalenol (DON). The mean content (microgram/kg) of all positive randomly taken samples was 18 (OCHRA), 62 (ZEA) and 630 (DON). The highest level (microgram/kg) for all samples was 120 (OCHRA) in barley, 3100 (ZEA) in corn cob mix and 1900 (DON) in maizegluten feed. The results of this survey show that feed components are often contaminated with mycotoxins. However, the contamination level could only sporadically cause production losses in animal husbandry.     

Application of Romero García method to the degradation process of DGEBA/ETDA filled with ultra fine metallic copper

Summary The thermal properties of an epoxy resin (diglycidyl ether Bisphenol A, DGEBA) cured with a primary amine (ethylenediamine, ETDA) and filled with 10, 20 and 30 wt. % of ultra fine copper particles were analyzed. The thermal results were evaluated by means of the Romero-Garcia method, which allowed to obtain the resin degradation kinetic parameters, as well as the possible decomposition mechanism. From the obtained results is possible to infer that higger copper content strongly affects the degradation process of the epoxy resin, which causes a drop off on the composites thermal stability. This behavior could be attributed to water presence, being this effect less pronounced for the resin with 10 wt. % copper and unfilled resin. Regarding to decomposition mechanism, three way transport showed the best correlation for all samples.     

Cimaterol and clenbuterol residue analysis by HPLC-HPTLC in liver.

A method has been developed for the analysis of cimaterol and clenbuterol residues in liver, with detection limits of 0.25 micrograms/kg and 0.5 micrograms/kg, respectively. The recovery varied from 55% to 60%. After extraction, a clean-up procedure with Baker-spe C-18 columns was performed. The two chemical compounds of interest were eluted with methanol. Cimaterol and clenbuterol were quantitatively determined by high-performance liquid chromatography (HPLC) using an RP-Select B (5 microns) column and a post-column reaction procedure. The positive results were confirmed by high-performance thin-layer chromatography (HPTLC) as this technique reaches the same level of sensitivity as the HPLC method.     

A comparative study of the durability and behaviour of fat lime and feebly-hydraulic lime mortars

Lime mortars are often used for repairs to historic buildings. This paper investigates two forms of lime binder: fat and feebly-hydraulic, in order to predict their long-term behaviours and hence ascertain which of the two possesses greater durability, so that they may be used more efficiently in restoration. Mortars were tested for properties governing moisture movement and also subject to durability cycles. The resistance to damage under freezing conditions was evaluated with the saturation coefficient. Thermal cycles had no effect on the mortars and gave no indication of the relative durabilities of the binders. Salt crystallization cycles, though effective in distinguishing the more durable of the two, were too aggressive to gauge a clear profile of salt weathering and succeeded in rapidly decomposing the samples. Tests on the properties governing moisture movement produced good indications of the degree to which the mortars permit flow through their fabrics. According to the results obtained, fat lime mortars are more durable than those made with feebly-hydraulic lime. The results also suggest that the feebly-hydraulic lime mortars are at a higher risk of decomposition by granular disintegration whereas fat lime mortars are better suited to damp, slightly exposed conditions. These results disagree with the general opinion that hydraulic limes are more durable than fat limes due to the additional strength and water insolubility arising from their hydraulicity.     

STATIONARY AND NON-STATIONARY STATE SPACE MODELS

Abstract. The concepts of time invariance, stationarity, non-stationarity and immemorial time are considered for state space models (SSMs). Necessary and sufficient conditions for stationarity are given and connected with standard conditions. Expressions are given for the unconditional mean and covariance matrix of the state of a time-immemorial SSM. Application of the results is made to a variety of theoretical and empirical models and the initialization of the Kalman filter in the non-stationary case and for the ARIMA ( p, d, q ) model.