Electrodialytic extraction of Cu,Pb and Cl from municipal solid waste incineration fly ash suspended in water

The possibility of using fly ash from municipal solid waste incineration (MSWI) in, for example, concrete is considered. MSWI fly ash, however, has too high a concentration of heavy metals, which may cause leaching problems during use or problems with waste handling at the end of the lifetime of the concrete. The Cl content in MSWI fly ash is also too high and will cause corrosion problems in reinforced concrete. The possibility of removing some of the unwanted heavy metals (Cu and Pb) together with Cl from an MSWI fly ash suspended in water using an electrodialytic separation method was investigated. The removal of Pb and Cu was found to be highly pH dependent and the highest contents removed were 41 and 90%, respectively. The Cu concentration of the ash decreased from 2200 to 860 mg kg^?1 but the Pb concentration increased from 8560 to 16 800 mg kg^?1, showing that Pb is mainly found in the ash fraction that is least soluble. Hence electrodialytic treatment of the ash suspended in water is not a solution to improve the ash quality in terms of Pb. The water‐soluble Cl content per unit weight of the original ash was 12.4%. The removal of water‐soluble Cl was efficient and >98% of Cl was removed (calculated on the basis of mean initial and final concentrations). This result indicates that electrodialytic extraction may be a method that can be used for the removal of Cl from ash prior to its utilization in concrete. Copyright © 2006 Society of Chemical Industry     

Effect of oil degradation during frying on the color of fried, battered squid rings

Oil degradation caused by the number of fryings performed and the effect of oil degradation on the color of fried battered squid rings were studied. Spectrophotometric techniques with absorbance in the UV and visible ranges, and iodine, peroxide, and acid values were used to determine oil degradation. Determination of various CIELAB parameters in order to study the external color of the fried battered squid rings revealed no differences in color due to the number of fryings. A study of the color of the battered squid rings at various frying times and temperatures showed significant differences for both variables. Although there was some degradation in the oil after 20 fryings, appearing as a slight darkening, it did not affect the final color of the fried, battered squid rings.     

Study of the thermomechanical and electrical properties of conducting composites containing natural rubber and carbon black

This work describes the preparation and characterization of composite materials obtained by the combination of natural rubber (NR) and carbon black (CB) in different percentages, aiming to improve their mechanical properties, processability, and electrical conductivity, aiming future applications as transducer in pressure sensors. The composites NR/CB were characterized through optical microscopy (OM), DC conductivity, thermal analysis using differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMA), thermogravimetry (TGA), and stress–strain test. The electrical conductivity varied between 10^?9 and 10 S m^?1, depending on the percentage of CB in the composite. Furthermore, a linear (and reversible) dependence of the conductivity on the applied pressure between 0 and 1.6 MPa was observed for the sample with containing 80 wt % of NR and 20% of CB. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

The cationic polymerization of α-methylstyrene in liquid sulfur dioxide initiated by the HI/I2 system

The polymerization of α-methylstyrene (αMeSty) initiated by HI/I₂ or HI in the presence of liquid sulfur dioxide has been investigated. The number-average molecular weight increased with the monomer concentration for reactions initiated by the HI/I₂ system. I₂ also participates in the initiation process, increasing the number-average polymer chain at higher monomer concentration. HI alone is also able to initiate the polymerization of αMeSty in the presence of SO₂. With this initiator, transfer reaction can be minimized in systems containing low amount of SO₂. Received: 19 December 1996/Revised: 27 January 1997/Accepted 29 January 1997     

Geochemical implications of trace elements and sulfur in the saturate, aromatic and resin fractions of crude oil from the Mara and Mara Oeste fields, Venezuela

Ten trace elements (Cr, Zn, Fe, Mn, Cu, Co, Ni, Mo, V and Sr) and sulfur were determined in the saturate, aromatic and resin fractions of 15 crude oils from Mara (DM) and Mara Oeste (DMO) fields of the Maracaibo Basin, Venezuela. The oils studied are classified as unaltered or altered by biodegradation. In the altered oil, the depletion of n-alkanes, the absence of isoprenoids and the presence of steranes and hopanes unaltered by biodegradation are indicative of moderate biodegradation. The elements Zn, Fe, Mn, Cu, Ni, and Sr were detected in the saturated hydrocarbon fraction; Cr and V were detected in the aromatic fraction in addition to the above elements; whereas the elements detected for the resin fraction were Cr, Zn, Fe, Cu, Ni, Mo, V, and Sr. Co was not detected in any fractions of the oils analyzed. Sulfur was found in all fractions of the oils studied. It was proposed that Fe, Zn, Sr, and Mn could have entered the oil during migration or Fe, Zn and Mn as pollutants during oil extraction. Cr and Cu may be of biological origin and Mo could be incorporated into the reservoir through bacteria. Only S, V, and Ni in the resin fractions can be used as indicators of the origin and correlation of Mara and Mara Oeste oils. Based on the results obtained in this work, it can be established that the V/(V+Ni) ratio in the resin fraction can be used as a correlation parameter, for these oils.     

Controlling the phase stability of polymer blends through the introduction of impenetrable interfaces

In this work, the effect of the introduction of modified solid surfaces into polymer blends on the phase‐separation process was investigated. Glass fibers with surfaces having different chemistries were introduced into polystyrene–poly(methyl methacrylate) blends. The glass fibers used either had fully hydrated surfaces or had surfaces covered with a random copolymer, poly(styrene‐co‐methyl methacrylate). The copolymer was synthesized by free‐radical polymerization of styrene and methyl methacrylate in the presence of previously vinyl silane‐treated glass fibers. The copolymerization and grafting procedures were investigated by FTIR and thermal analysis. Blends containing the fibers were studied using FTIR microscopy and optical microscopy. FTIR microscopy results showed that the composition of the phases in the blends was shifted by using fibers with different surface chemistries. Fibers with grafted copolymers were capable of narrowing the immiscibility region in the phase diagram, while fully hydrated fibers were able to expand the gap. It was proposed that interfacial interactions regulated by a hydrophilic–hydrophobic type of forces were responsible for guiding the described phase‐separation process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1619–1627, 2003     

Methanol Selective Oxidation to Formaldehyde over Iron-Molybdate Catalysts

This review deals with the important industrial reaction of formaldehyde manufacture by methanol oxidation over iron molybdate catalysts. Detailed reference is made to the used catalyst, preparation techniques (coprecipitation, sol-gel like, mechanical mixing, etc.) including unsupported and supported catalysts, promoters and characterization methods. The controversial active phase assignment (stoichiometric versus Mo rich iron molybdate) is discussed. The proposed reaction mechanisms and kinetic laws for the main and side reactions are examined. The catalyst deactivation processes are reviewed and the role of Mo excess on these processes is underlined. Finally conclusions and perspectives are presented.     

HumanTop: a multi-object tracking tabletop

In this paper, a computer vision based interactive multi-touch tabletop system called HumanTop is introduced. HumanTop implements a stereo camera vision subsystem which allows not only an accurate fingertip tracking algorithm but also a precise touch-over-the-working surface detection method. Based on a pair of visible spectra cameras, a novel synchronization circuit makes the camera caption and the image projection independent from each other, providing the minimum basis for the development of computer vision analysis based on visible spectrum cameras without any interference coming from the projector. The assembly of both cameras and the synchronization circuit is not only capable of performing an ad-hoc version of a depth camera, but it also introduces the recognition and tracking of textured planar objects, even when contents are projected over them. On the other hand HumanTop supports the tracking of sheets of paper and ID-code markers. This set of features makes the HumanTop a comprehensive, intuitive and versatile augmented tabletop that provides multitouch interaction with projective augmented reality on any flat surface. As an example to exploit all the capabilities of HumanTop, an educational application has been developed using an augmented book as a launcher to different didactic contents. A pilot study in which 28 fifth graders participated is presented. Results about efficiency, usability/satisfaction and motivation are provided. These results suggest that HumanTop is an interesting platform for the development of educational contents.     

A web-based platform for biosignal visualization and annotation

With the advent of wearable sensing and mobile technologies, biosignals have seen an increasingly growing number of application areas, leading to the collection of large volumes of data. One of the difficulties in dealing with these data sets, and in the development of automated machine learning systems which use them as input, is the lack of reliable ground truth information. In this paper we present a new web-based platform for visualization, retrieval and annotation of biosignals by non-technical users, aimed at improving the process of ground truth collection for biomedical applications. Moreover, a novel extendable and scalable data representation model and persistency framework is presented. The results of the experimental evaluation with possible users has further confirmed the potential of the presented framework.