Effects of annealing on the hierarchical crystalline structures and mechanical properties of injection‐molded bars of high‐density polyethylene

The effect of annealing on the microstructural evolution and mechanical properties of high‐density polyethylene parts molded via gas‐assisted injection molding was investigated using scanning electron microscopy, differential scanning calorimetry, two‐dimensional wide‐angle X‐ray diffraction and tensile testing. The results indicated that a variety of annealing temperatures could induce considerable variations in the hierarchical structures, crystallinity, lamellar thickness and yield stress of the molded bars. According to these results, the annealing temperatures could be divided into three regions. In the low‐temperature region of annealing at 80 °C, the spatial variation of the superstructure developed along the thickness direction and mechanical properties of the annealed sample were mainly unchanged and similar to those of the original specimen. At 100 and 120 °C, the intermediate temperature region of annealing, the thickness of the crystals, degree of orientation and yield stress of annealed samples were greatly improved. Finally, at 127 °C, the degree of orientation decreased and yield stress slightly improved, an indication of the high‐temperature annealing region being characterized by increasing melting/recrystallization and causing relaxation of oriented molecular chains. A model is proposed to interpret the mechanism of the annealing treatment of the samples at various temperatures. © 2013 Society of Chemical Industry     

Effect of stoichiometry and milling processes in the synthesis and the piezoelectric properties of modified KNN nanoparticles by solid state reaction

Nanoparticles in the system (K,Na,Li)(Nb,Ta,Sb)O₃, modified KNN, were synthesized following a solid state reaction procedure. Milling of the individual carbonate and oxide raw materials was carried out before mixing of the components to optimize particle size. These mixtures were calcined at 700 °C for 2 h, obtaining nanoparticles with size ranging between 50 and 200 nm. The optimization of the raw materials particle size and the particle refinement of the carbonates during their decomposition play a key role in the formation of the modified KNN nanoparticles by solid state route. The obtained nanoparticles show tetragonal and orthorhombic phases coexistence that could be attributed in part to the lack of homogeneity of cations distribution confirmed by EDS analysis. The K⁺ cation excess on the modified KNN system produces a displacement of Li⁺ cations from the perovskite structure that is the origin of the stabilization of the orthorhombic symmetry. These nanoparticles are used to sintered ceramics with good piezoelectric properties without needing of anisotropic preparation methods. The sintered ceramics show resistance to hygroscopicity and deliquescence.     

The effect of montmorillonite and compatibilizer quantities on stiffness and toughness of polyamide nanoblends

Although polymer blend nanocomposites are widely studied, the balance between stiffness and toughness has not yet been investigated in detail. Some materials producers as well as some sectors in the automotive industry try to improve the toughness of materials without an important loss in stiffness. With this in mind, the aim of the study reported here was to obtain a good balance between toughness and stiffness of polymer blends with different amounts of clay and compatibilizer. In this context, the microstructure of polyamide 6/ethylene–propylene–diene metallocene terpolymer/(ethylene–propylene–diene copolymer)‐graft‐(maleic anhydride) blends with various amounts of clay (2, 3, 4 and 5 wt%) and compatibilizer (10 and 20 wt%) was studied to analyse the achieved morphology to understand the macroscopic properties. The morphology of the rubber phase and the dispersion of the montmorillonite (MMT) are the main factors that influence the mechanical properties. In this sense, the highest Young's modulus is achieved for nanoblends with 5 wt% of MMT, although this nanoblend has the lowest value of notched Izod impact strength. The results obtained suggest that there is a clear trade‐off between stiffness, toughness and temperature behaviour when the ratio of (ethylene–propylene–diene copolymer)‐graft‐(maleic anhydride) to MMT is 5:1. Copyright © 2009 Society of Chemical Industry     

Nanoporous Al‐Ni‐Co‐Ir‐Mo High‐Entropy Alloy for Record‐High Water Splitting Activity in Acidic Environments

Ir‐based binary and ternary alloys are effective catalysts for the electrochemical oxygen evolution reaction (OER) in acidic solutions. Nevertheless, decreasing the Ir content to less than 50 at% while maintaining or even enhancing the overall electrocatalytic activity and durability remains a grand challenge. Herein, by dealloying predesigned Al‐based precursor alloys, it is possible to controllably incorporate Ir with another four metal elements into one single nanostructured phase with merely ≈20 at% Ir. The obtained nanoporous quinary alloys, i.e., nanoporous high‐entropy alloys (np‐HEAs) provide infinite possibilities for tuning alloy's electronic properties and maximizing catalytic activities owing to the endless element combinations. Particularly, a record‐high OER activity is found for a quinary AlNiCoIrMo np‐HEA. Forming HEAs also greatly enhances the structural and catalytic durability regardless of the alloy compositions. With the advantages of low Ir loading and high activity, these np‐HEA catalysts are very promising and suitable for activity tailoring/maximization.     

Depletion of tylosin residues in feathers,muscle and liver from broiler chickens after completion of antimicrobial therapy

Tylosin is one of the most commonly used antimicrobial drugs from the macrolide family and in broiler chickens it is used specially for the treatment of infectious pathologies. The poultry industry produces several by-products, among which feathers account for up to 7% of a chicken’s live weight, thus they amount to a substantial mass across the whole industry. Feathers have been repurposed as an animal feed ingredient by making them feather meal. Therefore, the presence of high concentrations of residues from antimicrobial drugs in feathers might pose a risk to global public health, due to re-entry of these residues into the food chain. This work aimed to characterise the depletion behaviour of tylosin in feather samples, while considering its depletion in muscle and liver tissue samples as a reference point. To achieve this goal, we have implemented and validated an analytical methodology suitable for detecting and quantifying tylosin in these matrices. Sixty broiler chickens, raised under controlled conditions, received an oral dose of 32 mg kg^-1 of tylosin for 5 days. Tylosin was quantified in muscle, liver and feathers by liquid chromatography coupled with a photodiode array detector (HPLC-DAD). High concentrations of tylosin were detected in feather samples over the whole experimental period after completing both the therapy and the recommended withdrawal time (WDT). On the other hand, tylosin concentrations in muscle and liver tissue samples fell below the limit of detection of this method on the first sampling day. Our results indicate that the WDT for feather samples is 27 days, hence using feather meal for the formulation of animal diets or for other agricultural purposes could contaminate with antimicrobial residues either other livestock species or the environment. In consequence, we recommend monitoring this matrix when birds have been treated with tylosin, within the context of poultry farming.