Prediction of the maximum spoutable height in spout-fluid beds

The development of the semi-theoretical correlation in Hadzisdmajlovic et al. (1983) for predicting the maximum spoutable height in a spout-fluid bed, is observed to involve certain discrepancies. Based on their experimental data, a new correlation is proposed.     

Chemical control of superconducting properties of (Y,Ca)(Sr,Ba)2Cu2.7Ga0.3O7−δ

The partial substitution of Ga at the Cu(1) (chain) sites of the YBa₂Cu₃O₇ structure allows synthesis at ambient pressure of Ba-free analogs, e.g., YSr₂Cu_2.7Ga_0.3O_7?δ . Materials with this composition have been found to be nonsuperconducting, but superconductivity has been induced by one or more of the following methods: Ca substitutions at the Y site; Ba substitutions at the Sr site; annealing in high-pressure oxygen. The influence of these chemical manipulations onT _c has been monitored and all methods have been found to enhanceT _c . The electronic effects of Ba substitutions have been deduced indirectly using powder neutron diffraction, and such substitutions appear to result in a redistribution of hole density into the Cu(1) sites from the superconducting CuO₂ planes.     

The TSIMMIS Approach to Mediation: Data Models and Languages

TSIMMIS—The Stanford-IBM Manager of Multiple InformationSources—is a system for integrating information. It offers a datamodel and a common query language that are designed to support thecombining of information from many different sources. It also offerstools for generating automatically the components that are needed tobuild systems for integrating information. In this paper we shalldiscuss the principal architectural features and their rationale.     

A design advisor for the optimal inspection of circularity tolerance

In the wake of growing importance for quality and the need to reduce inspection costs simultaneously, the need for a scientific method of selecting an optimum inspection strategy for coordinate measuring machine (CMM) based inspection has become very important. The inspection error resulting from CMM inspection is greatly affected by the profile irregularities and the sampling strategy, which includes sample size, sampling methods, and algorithms used for form evaluation. This paper describes a system that can recommend an optimal inspection plan based on the needs of the user. A design of experiments (DOE) based approach is used to relate the inspection error with sampling strategies. Surface irregularities are included in the form of lobes formed on the profile. A new two-way model is proposed that works in both directions between the sampling strategy and the performance metrics. The results indicate that the number of lobes and the sampling method used have little impact on the inspection error, while the sample size and form evaluation algorithms have a significant influence. An inspection plan advisor is presented, which provides an inspection plan based on the estimated shape and acceptable measurement error.     

Cost-Benefit Analysis of Residential Energy-Efficiency Upgrades in Phoenix, Arizona

With worldwide energy consumption rising, there is a need to reduce energy use of the housing stock. While this general idea is well-known, there is an overwhelming amount of product data and manufacturers claims through which the homebuilder or designer must sort to make informed selections of energy-efficient upgrades. The main objective of this research was to identify cost effective–energy efficient upgrades from a group of 16 commonly available choices, and rank them according to the most beneficial for the least cost. This study was conducted in Phoenix, Arizona, and included a sample of 30 production-style homes typical of the Phoenix metropolitan area. Energy-simulation software was used to perform energy evaluations and derive the benefits of each upgrade. The cost of each upgrade was obtained from a database of national average costs and from a local context. Differences in the selection of beneficial upgrades vary dramatically with the source of the cost information. This research provides a generic methodology that can be used by builders and designers to select appropriate energy-efficient upgrades for a given geographic area that will provide high operating benefits relative to the amount of capital investment.     

Properties of ligno‐cellulose fiber Hildegardia

Studies on some properties such as the density, the degradation temperatures, the morphology and the spectral features of the ligno‐cellulose fiber Hildegardia were carried out in both untreated and alkali treated form. The fibers are found to have good morphology and moderate initial and final degradation temperatures. On alkali treatment, the lignin was found to be eliminated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2216–2221, 2002     

Microstructural effects on the tensile properties and deformation behavior of a Ti-48Al gamma titanium aluminide

The effects of microstructure on the tensile properties and deformation behavior of a binary Ti-48Al gamma titanium aluminide were studied. Tensile-mechanical properties of samples with microstructures ranging from near γ to duplex to fine grained, near- and fully-lamellar were determined at a range of temperatures, and the deformation structures in these characterized by transmission electron microscopy (TEM). Microstructure was observed to exert a strong influence on the tensile properties, with the grain size and lamellar volume fraction playing connected, but complex, roles. Acoustic emission response monitored during the tensile test revealed spikes whose amplitude and frequency increased with an increase in the volume fraction of lamellar grains in the microstructure. Analysis of failed samples suggested that microcracking was the main factor responsible for the spikes, with twinning providing a minor contribution in the near-lamellar materials. The most important factor that controls ductility of these alloys is grain size. The ductility, yield stress, and work-hardening rate of the binary Ti-48Al alloy exhibit maximum values between 0.50 and 0.60 volume fraction of the lamellar constituent. The high work-hardening rate, which is associated with the low mobility of dislocations, is the likely cause of low ductility of these alloys. In the near-γ and duplex structures, slip by motion of 1/2<110] unit dislocations and twinning are the prevalent deformation modes at room temperature (RT), whereas twinning is more common in the near- and fully-lamellar structures. The occurrence of twinning is largely dictated by the Schmid factor. The 1/2<110] unit dislocations are prevalent even for grain orientations for which the Schmid factor is higher for <101] superdislocations, though the latter are observed in favorably oriented grains. The activity of both of these systems is responsible for the higher ductility at ambient temperatures compared with Al-rich single-phase γ alloys. A higher twin density is observed in lamellar grains, but their propagation depends on the orientation and geometry of the individual γ lamellae. The increase in ductility at high temperatures correlates with increased activity of 1/2<110] dislocations (including their climb motion) and twin thickening. The role of microstructural variables on strength, ductility, and fracture are discussed. This article is based on a presentation made in the symposium entitled “Fundamentals of Structural Intermetallics,” presented at the 2002 TMS Annual Meeting, February 21–27, 2002, in Seattle, Washington, under the auspices of the ASM and TMS Joint Committee on Mechanical Behavior of Materials.     

Cornea stress test--evaluation of corneal endothelial function in vivo by contact lens induced stress

Changes in the NHS have supported the idea of targeting health services to those in greatest need. This has meant that health visitors are increasingly having to identify 'vulnerable' families in need of increased health visiting intervention. This paper reports on a qualitative study undertaken in order to explore the ways in which health visitors plan and organize their work in relation to the concept of vulnerability. Focus groups and semi-structured interviews were carried out with health visitors from two separate geographical areas, one an inner city area and the other suburban, in order to explore the criteria by which health visitors define vulnerability and decide to increase their levels of intervention to particular families. It was found that vulnerability was extremely difficult to define but that the health visitors used criteria which were appropriate to the particular localities in which they worked to identify vulnerable families and to increase their levels of intervention to those families. Health visitors were targeting their services within a framework of a basic minimum service to all and were assessing the health needs of individuals or families rather than planning their work on the basis of community or practice profiles.     

An alternative explicit formulation for the DKT plate-bending element

The stiffness matrix for the DKT plate-bending element is formulated explicitly in a global co-ordinate system. This approach avoids transformations of stiffness, and elasticity properties for anisotropic materials, from local to global co-ordinates, which were required in previous formulations. A FORTRAN listing of the algorithm is appended for potential users.