Deployment of Mobile Switching Centers in a Telecommunications Network: A Stochastic Programming Approach

We consider a network design problem arising in mobile communications. At the core of the network is a number of mobile switching centers (MSCs), each serving a number of base station controllers (BSCs). The network design problem involves three major groups of decisions – deployment of a number of new MSCs, allocation of BSCs to new and existing MSCs, and capacity expansion of transmission links interconnecting the MSCs. These decisions must be made so as to minimize the incurred costs while meeting customer demand and observing the capacity restrictions. We formulate the problem as a two-stage stochastic program with mixed-integer recourse. To solve the problem we apply a dual decomposition procedure, solving scenario subproblems by means of branch and cut. The solution procedure has been tested on a real life problem instance provided by SONOFON, a Danish mobile communication network operator, and we report results of our computational experiments.     

A technique for improving gain and noise figure of common-gate wideband LNAs

This paper presents a novel compensation design for regulators, i.e., modified NMCF (nested Miller compensation with feedforward Gm stage), resulting in a linear LDO (low dropout) regulator whose performance is independent of the off-chip capacitor and its ESR (equivalent series resistor). The proposed compensation method ensures the stability of the feedback loop and the sufficient phase margin of the LDO regulator. Besides, the transient response become faster. The analysis of the stability is derived to solidify the proposed design. The proposed design is implemented using TSMC 0.35 μm 2P4M CMOS process. The results verify the performance and the stability on silicon. The power supply rejection ratio is 25 dB @ [200 Hz, 3 MHz], [50 Ω, 500 Ω] provided that the input voltage varies from 4 to 5 V.     

On Surface Losses in Direct Metal Laser Sintering Printed Millimeter and Submillimeter Waveguides

Different lengths of WR3 (220–330 GHz) and WR10 (75–110 GHz) waveguides are fabricated through direct metal laser sintering (DMLS). The losses in these waveguides are measured and modelled using the Huray surface roughness model. The losses in WR3 are around 0.3 dB/mm and in WR10 0.05 dB/mm. The Huray equation model is accounting relatively good for the attenuation in the WR10 waveguide but deviates more in the WR3 waveguide. The model is compared to finite element simulations of the losses assuming an approximate surface structure similar to the resulting one from the DMLS process.     

Interfacial Connections between Organic Perovskite/n+ Silicon/Catalyst that Allow Integration of Solar Cell and Catalyst for Hydrogen Evolution from Water

The rapidly increasing solar conversion efficiency (PCE) of hybrid organic–inorganic perovskite (HOIP) thin-film semiconductors has triggered interest in their use for direct solar-driven water splitting to produce hydrogen. However, application of these low-cost, electronic-structure-tunable HOIP tandem photoabsorbers has been hindered by the instability of the photovoltaic-catalyst-electrolyte (PV+E) interfaces. Here, photolytic water splitting is demonstrated using an integrated configuration consisting of an HOIP/n⁺silicon single junction photoabsorber and a platinum (Pt) thin film catalyst. An extended electrochemical (EC) lifetime in alkaline media is achieved using titanium nitride on both sides of the Si support to eliminate formation of insulating silicon oxide, and as an effective diffusion barrier to allow high-temperature annealing of the catalyst/TiO₂-protected-n⁺silicon interface necessary to retard electrolytic corrosion. Halide composition is examined in the (FA_1-xCs_x)PbI₃ system with a bandgap suitable for tandem operation. A fill factor of 72.5% is achieved using a Spiro-OMeTAD-hole-transport-layer (HTL)-based HOIP/n⁺Si solar cell, and a high photocurrent density of −15.9 mA cm⁻² (at 0 V vs reversible hydrogen electrode) is attained for the HOIP/n⁺Si/Pt photocathode in 1 m NaOH under simulated 1-sun illumination. While this thin-film design creates stable interfaces, the intrinsic photo- and electro-degradation of the HOIP photoabsorber remains the main obstacle for future HOIP/Si tandem PEC devices.     

Passive 350 GHz Video Imaging Systems for Security Applications

Journal of Infrared, Millimeter, and Terahertz Waves - Passive submillimeter-wave imaging is a concept that has been in the focus of interest as a promising technology for personal security...     

Robust load balancing under traffic uncertainty��tractable models and efficient algorithms

Routing configurations that have been optimized for a nominal traffic scenario often display significant performance degradation when they are subjected to real network traffic. These degradations are due to the inherent sensitivity of classical optimization techniques to changes in model parameters combined with the significant traffic variations caused by demand fluctuations, component failures and network reconfigurations. In this paper, we review important sources for traffic variations in data networks and describe tractable models for capturing the associated traffic uncertainty. We demonstrate how robust routing settings with guaranteed performance for all foreseen traffic variations can be effectively computed via memory efficient iterative techniques and polynomial-time algorithms. The techniques are illustrated on real data from operational IP networks.     

Alkali retention/separation during bagasse gasification: a comparison between a fluidised bed and a cyclone gasifier

Biomass fuelled integrated gasification/gas turbines (BIG/GTs) have been found to be one of the most promising technologies to maximise electricity output in the sugar industry. However, biomass fuels contain alkali metals (Na and K) which may be released during the gasification processes and cause deleterious effects on the downstream hardware (e.g. the blades of gas turbines). Much research has therefore been focused on different kinds of gas cleaning. Most of these projects are using a fluidised bed gasifier and includes extensive gas cleaning which leads to a high capital investment.

Increasing alkali retention/separation during the gasification may lead to improved producer gas quality and reduced costs for gas cleaning. However, very little quantitative information is available about the actual potential of this effect. In the present work, comparative bench-scale tests of bagasse gasification were therefore run in an isothermal fluidised bed gasifier and in a cyclone gasifier to evaluate which gasification process is most attractive as regards alkali retention/separation, and to try to elucidate the mechanisms responsible for the retention.

The alkali retention in the fluidised bed gasifier was found to be in the range of 12–4% whereas in the cyclone gasifier the alkali separation was found to be about 70%. No significant coating of the fluidised bed's bed material particles could be observed. The SEM/EDS and the elemental maps of the bed material show that a non-sticky ash matrix consisting of mainly Si, Al and K were distributed in a solid form separated from the particles of bed material. This indicates the formation of a high temperature melting potassium containing silicate phase, which is continuously scavenged and lost from the bed through elutriation.     

Superior self-paced memorization of digits in spite of a normal digit span: The structure of a memorist’s skill.

Over the last century many individuals with exceptional memory have been studied and tested in the laboratory. This article studies Chao Lu, who set a Guinness World Record by memorizing 67,890 decimals of pi. Chao Lu’s superior self-paced memorization of digits is shown through analyses of study times and verbal reports to be mediated by mnemonic encoding and retrieval processes. Furthermore, Chao Lu’s development of his superior memory for decimals of pi is consistent with his engagement in thousands of hours of memorization. In contrast to most other studied memorists, who have digit spans over 15 digits, Chao Lu exhibited a digit span in only the normal range. Implications for different types of memorization skills and associated practice activities are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Calcium sulphide formation in fluidized bed boilers

Analyses of samples of bed ash from a stationary fluidized bed boiler show the presence of calcium sulphide. In some samples, half of the total sulphur was present as sulphide. The samples containing CaS were obtained under unstaged conditions and with a high excess air ratio, 1.3 to 1.4. The samples were taken after a stop in the limestone addition, i.e. at high SO₂ emissions of about 1000 mL/m³ (ppm). No CaS was found during limestone addition when the SO₂ emission was 300–400 mL/m³. This indicates that formation of large amounts of CaS may be initiated as the SO₂ concentration exceeds some critical level.