Motion Perception Using Analog VLSI

Motion perception is arguably a fundamental mechanism used by natural species to accomplish a number of tasks, such as navigating freely in an unknown environment. Traditional motion perception methods tend to be computationally intensive, requiring powerful computers and large memories. However, by copying biological mechanisms, such as elementary motion discrimination at the early stages of the visual processing paths, it should be possible to build small and efficient motion perception systems. This paper describes the manner in which a simple motion perception model based on the insect visual system has been implemented using mixed analog/digital VLSI. The device has been fabricated in a 2 micron double metal, double polysilicon process, and comprises 61 photo-detectors, and associated analog and digital circuitry. While not entirely successful in that component mismatches hamper the detection of dark-to-bright changes in contrast, the results clearly show the feasibility of using such a device in autonomous control systems.     

Optimised wavelength interleaved radio-over-fibre system based on highly birefringent fibre Bragg gratings

A new scheme, based on Bragg gratings written in highly birefringent fibre that allows both increasing the channel density and relaxing the filter bandwidth requirements in future radio-over-fibre wavelength interleaved distribution networks, is presented and tested.     

Analysis of supercritical carbon dioxide extracts from cones and leaves of a Humulus lupulus L cultivar

Extracts obtained by supercritical carbon dioxide extraction of cones and leaves of hop (Humulus lupulus L) at different combinations of temperature and pressure were analysed for their α- and β-acids and volatiles, using HPLC and GC respectively. The yield and composition of the mixtures of bitter compounds from the cones were largely influenced by the temperature and pressure applied during the extraction. Bitter compounds could not be detected in the extracts from the leaves. The most important volatile components identified were β-myrcene, β-caryophyllene and α-humulene. The extraction parameters also influenced the composition of the mixture of volatiles from the cones and leaves, 40°C and 20.0 MPa being optimum for the extraction of both bitter compounds and volatiles, which are thought to be important for the aroma of beer.     

Wide dynamic range parallel feedback transimpedance amplifier for 10 Gb/s optical links

This paper presents the design and implementation of a new wide dynamic range parallel feedback (PF) transimpedance amplifier (TIA) for 10 Gb/s optical links. The wide dynamic range is attributed to the novel TIA architecture employing both shunt-shunt and shunt-series feedback networks. The outstanding features of the TIA are wide dynamic range, high gain, low power consumption and design simplicity. A prototype implemented in a 0.5 μm SiGe BiCMOS technology and operating at −3.3 V power supply features an 18.4 dBm dynamic range with a BER less than 10⁻¹², an optical sensitivity of −16 dBm, optical overload of +2.4 dBm, a bandwidth of 8.27 GHz, a gain of 950 Ω and a power consumption of 189 mW. The new parallel feedback architecture offers improved overload and noise performance when compared to previously reported, state of the art, single feedback TIA designs and meets all the 10 Gigabit Ethernet and short-reach OC-192 SONET specifications. Ricardo Andres Aroca received the B.S. (Hons) degree in electrical engineering from the University of Windsor, Canada, and the M.S. degree from the University of Toronto, Canada, in 2001 and 2004, respectively. In 2000 he spent two 4 month internships with Nortel Networks in the Microelectronics Department. Mr. Aroca received the Natural Sciences and Engineering Research Counsel of Canada (NSERC) Postgraduate Scholarship award in 2002. He is currently working toward the Ph.D. degree at the University of Toronto where his research interests lie in the area of high-frequency integrated circuits for wireless and wireline communication systems. C. Andre T. Salama received the B.A.Sc. (Hons.) M.A.Sc. and Ph. D. degrees, all in Electrical Engineering, from the University of British Columbia in 1961, 1962 and 1966 respectively. From 1962 to 1963 he served as a Research Assistant at the University of California, Berkeley. From 1966 to 1967 he was employed at Bell Northern Research, Ottawa, as a Member of Scientific Staff working in the area of integrated circuit design. Since 1967 he has been on the staff of the Department of Electrical and Computer Engineering, University of Toronto where he held the J.M. Ham Chair in Microelectronics from 1987 to 1997. In 1992, he was appointed to his present position of University Professor for scholarly achievements and preeminence in the field of microelectronics. In 1989-90, he was awarded the ITAC/NSERC Research Fellowship in information technology. In 1994, he was awarded the Canada Council I.W. Killam Memorial Prize in Engineering for outstanding career contributions to the field of microelectronics. In 2000, he received the IEEE Millenium Medal. In 2003, he received the Outstanding Lifetime Achievement Award from the Canadian Semiconductor Technology Conference for seminal and outstanding contributions to semiconductor device research and promotion of Canadian University research in microelectronics. In 2004, he received the NSERC Lifetime Achievement Award of Research Excellence for outstanding and sustained contributions to the field of microelectronics and the Networks of Centres of Excellence (NCE) Recognition Award for research excellence and outstanding leadership.He was associate editor of the IEEE Transactions on Circuits and Systems in 1986–88 and a member of the International Electron Devices Meeting (IEDM) Technical Program Committeein 1980–82, 1987–89 and 1996–98. He was the chair of the Solid State Devices Subcommittee for IEDM in 1998 and was a member of the editorial board of Solid State Electronics from 1984 to 2002. He is presently a member of the editorial board of the Analog IC and Signal Processing Journal and the Technical Program Committee of the International Symposium on Power Semiconductor Devices and ICs (ISPSD) and the Technical ProgramCommittee of the International Symposium on Low Power Electronics and Design (ISLPED). He chaired the technical program committee of ISPSD in 1996 and was the general chair for the conference in 1999.Dr. Salama is the Scientific Director of Micronet, a network of centres of excellence focussing on microelectronics research and funded by the Canadian Government and Industry. He has published extensively in technical journals, is the holder of eleven patents and has served as a consultant to the semiconductor industry in Canada and the U.S. His research interests include the design and fabrication of semiconductor devices and integrated circuits with emphasis on deep submicron devices as well as circuits and systems for high speed, low power signal processing applications. Dr. Salama is a Fellow of the Institute of Electrical and Electronics Engineers, a Fellow of the Royal Society of Canada, a Fellow of the Canadian Academy of Engineering, a member of the Association of Professional Engineers of Ontario, the Electrochemical Society and the Innovation Management Association of Canada.     

A high-speed CMOS circuit for 1.2-Gb/s 16*16 ATM switching

The authors describe a 0.7- mu m CMOS asynchronous transfer mode (ATM) switch circuit of 350 K transistors, the kernel of a fully autonomous 16*16 ATM switching matrix devoted to telecommunications. This matrix is able to switch ATM multiplexes with a throughput of up to 1.2 Gb/s per access line, and was implemented using 16 receiver/transmitter circuits and a control circuit. The architecture of the ATM switch circuit is based on a large embedded and shared dual-access memory. Each chip processes 4-b slices of each incoming multiplex. Seven such chips working in parallel are enough to achieve standard ATM cell switching. Up-to-date test features, such as boundary scan, built-in self-test, and redundancy were implemented in the circuit.<>     

Phase Behavior of Selected Condensed Double-Decker Shaped Silsesquioxane Compounds

Silicon - Bisfunctional dichlorosilanes were reacted with tetrasilanol of double-decker shaped octaphenylsilsesquioxane (DDSQ) to form fully condensed DDSQ compounds. The crystallographic and...     

miRNome Profiling and Functional Analysis Reveal Involvement of hsa-miR-1246 in Colon Adenoma-Carcinoma Transition by Targeting AXIN2 and CFTR

Regulatory changes occurring early in colorectal cancer development remain poorly investigated. Since the majority of cases develop from polyps in the adenoma-carcinoma transition, a search of early molecular features, such as aberrations in miRNA expression occurring prior to cancer development, would enable identification of potentially causal, rather than consequential, candidates in the progression of polyp to cancer. In the current study, by employing small RNA-seq profiling of colon biopsy samples, we described differentially expressed miRNAs and their isoforms in the adenoma-carcinoma transition. Analysis of healthy-adenoma-carcinoma sequence in an independent validation group enabled us to identify early deregulated miRNAs including hsa-miR-1246 and hsa-miR-215-5p, the expressions of which are, respectively, gradually increasing and decreasing. Loss-of-function experiments revealed that inhibition of hsa-miR-1246 lead to reduced cell viability, colony formation, and migration rate, thereby indicating an oncogenic effect of this miRNA in vitro. Subsequent western blot and luciferase reporter assay provided evidence of hsa-miR-1246 being involved in the regulation of target AXIN2 and CFTR genes’ expression. To conclude, the present study revealed possible involvement of hsa-miR-1246 in early colorectal cancer development and regulation of tumor suppressors AXIN2 and CFTR.