A high accuracy reactive power and reactive energy meter

Contents A high accuracy instrument for reactive power and reactive energy measurements in a single phase power network is described in the paper. The measurement principle is in accordance with IEC recommendation. Test results show that in the range of 1 to 100% of the input current the accuracy of the meter is better than 100 ppm for frequency variations of ±5% around the nominal frequency. The instrument could be used as a single-phase reactive power and reactive energy standard. A three phase version of the instrument could be used as a standard or as a revenue meter because of its high accuracy, simple design and anticipated low cost.

---

Ein Meßgerät höher Präzision zur Blindleistungs- und Blindverbrauchsmessung

Übersicht In diesem Artikel wird ein Meßgerätu zur Blindleistungs- und Blindenergiemessung in Einphasen-Wechselstromnetzen beschrieben. Das Meßprinzip stimmt mit der Vorschrift der IEC überein. Die Meßergebnisse zeigen, daß im Bereich von 1 bis 100% des Eingangsstroms bei Frequenzvariationen von ±5% von der Nennfrequenz die Meßfehler des Gerätes kleiner als 0.01% sind. Das Meßgerät könnte als ein Normal für Blindleistungs- und Blindenergievergleichsmessungen in Einphasensystemen verwendet werden. Eine Dreiphasenversion dieses Meßgerätes könnte wegen seiner hohen Genauigkeit und des einfachen und preiswerten Aufbaus als ein Normal oder als Verbrauchsmeßgerät für die Kostenberechnung benutzt werden.

---

---

Institute for National Measurement Standards, National Research Council     

Adaptive nonuniform polar quantization application to high quality speech compression

The logarithmic companding technique has shown to be extremely useful in speech quantization with rate of 8 bits/sample. However, for lower bit rates it is not the ideal solution for high quality speech coding. Because of that, in this paper we establish source coding scheme which enables better spectrum efficiency for input that has a large dynamic range. Since our wish is also to improve signal quality in comparison with quality defined with standards G.711 and G.712, we opt for adaptive technique application to the speech coding. Our research shows that proper design of forward gain-adaptive polar quantization can enable compression of about 1 bit/sample as well as significantly better quality than in case of using coder designed according to standard G.711. Furthermore, performances can be sustained over the whole speech dynamic range. Also, if the requisite speech quality is not supposed to be lower than G.712 standard quality, the achieved compression can be almost 1.5 bits/sample. Besides, we propose knew simple encoding rule which can additionally reduce bit rate for 0.1 bit/sample.     

Negative bias temperature instability in n-channel power VDMOSFETs

Negative gate bias is used in some applications for faster switching off the n-channel MOS devices. It is shown in this study that NBT stress-related instability in commercial n-channel power VDMOSFETs could be actually more serious than in corresponding p-channel devices. NBT stress is found to create equal V_T shifts in both device types, whereas the subsequent positive bias annealing results in more serious overall V_T instability in n-channel devices. The changes in the densities of stress-induced interface traps in two device types are equal as well, but significant amounts of NBT stress-induced border traps are only found in n-channel devices. All the results are discussed in terms of hydrogen reaction and diffusion model.     

Soft Nanopatterning on Light‐Emitting Inorganic–Organic Composites

In this work we demonstrate the nanopatterning of nanocomposites made by luminescent zinc oxide nanoparticles and light‐emitting conjugated polymers by means of soft molding lithography. Vertical nanofluidics is exploited to overcome the polymer transport difficulties intrinsic in materials incorporating nanocrystals, and the rheology, fluorescence, absolute quantum yield, and emission directionality of the nanostructured composites are investigated. We study the effect of patterned gratings on the directionality of light emitted from the nanocomposites, finding evidence of the enhancement of forward emitted light, due to the printed wavelength‐scale periodicity. These results open new possibilities for the realization of nanopatterned devices based on hybrid organic‐inorganic systems.     

Near‐Infrared (NIR) Organic Light‐Emitting Diodes (OLEDs): Challenges and Opportunities

The rapid development of the science and technology of organic semiconductors has already led to mass application of organic light‐emitting diodes (OLEDs) in television monitors of outstanding quality as well as in a large variety of smaller displays found in smartphones, tablets, and other gadgets, while introduction of the technology to the illumination sector is imminent. Notably, the requirements of all such applications for emission in the visible range of the electromagnetic spectrum are well tuned to the optical and electronic properties of typical organic semiconductors, thereby representing relatively “low‐hanging fruits,” in terms of material development and exploitation. However, the question arises as to whether developing materials suited for efficient near‐infrared (NIR, 700–1000 nm) emission is possible, and, crucially, desirable to enable new classes of applications spanning from through‐space, short‐range communications to biomedical sensors, night vision, and more generally security applications to name but a few. Here, the major fundamental hurdles to be overcome to achieve efficient NIR emission from organic π‐conjugated systems are discussed, recent progress is reviewed, and an outlook for further development of both materials and applications is provided.     

The oral glucose minimal model: estimation of insulin sensitivity from a meal test

Recently, a new approach has been proposed to estimate insulin sensitivity (S(I)) from an oral glucose tolerance test or a meal using an "integral equation". Here, we improve on the "integral equation" by resorting to a "differential equation" approach. The classic glucose kinetics minimal model was used with the addition of a parametric model for the rate of appearance into plasma of oral glucose (Ra). Three behavioral models of Ra were proposed: piecewise-linear (P), spline (S) and dynamic (D). All three models performed satisfactorily allowing a precise estimation of S(I) and a plausible reconstruction of Ra. Mean S(I) estimates were virtually identical: S(I)P = 6.81 +/- 0.87 (SE); S(I)S = 6.53 +/- 0.80; and S(I)D = 6.62 +/- 0.79. S(I) strongly correlated with the integral-equation index (I) S(I)I: r = 0.99, p < 0.01 for models D and S, and r 0.97, p < 0.01 for P. Also, SI compared well with insulin sensitivity estimated from intravenous glucose tolerance test in the same subjects (r = 0.75, p < 0.01; r = 0.71, p < 0.01; r = 0.73, p < 0.01, respectively, for P, S, and D models versus s(I)IVGTT). Finally, the novel approach allows estimation of SI from a shorter test (120 min): model P yielded S(I)R = 7.16 +/- 1.0 (R for reduced) which correlated very well with S(I)P and S(I)I (respectively, r = 0.94, p < 0.01; r = 0.95, p < 0.01) and still satisfactorily with S(I)IVGTT (r = 0.77, p < 0.01).     

To the understanding of the formation of the III–V based droplet epitxial nanorings

The paper deals with the kinetics of the droplet epitaxial GaAs quantum ring formation grown on AlGaAs (0 0 1) surface. The observation is, that the aspect ratio of these nano structures is depends not only on the technological parameters but on the size of the initial droplet. Under appropriate growth conditions, the depressions, in the middle of the rings are deeper than the surface level of the substrate. A large number of tests show, that the depressions in the middle of the small rings are often deeper than that of the larger ones. The number is larger, than just statistical fluctuation. An explanation for this phenomenon and its kinetics are given in the paper, based on the size dependence of the material properties, like for instance solubility. The plausible explanation assumes is that the probability of the crystal seed formation in the larger droplets is higher.     

Thermoacoustic Emission from Carbon Nanotubes Imaged by Atomic Force Microscopy

The thermoacoustic effect of isolated single‐wall carbon nanotubes aligned between electrodes is experimentally observed for the first time by imaging the emitted acoustic wave using an atomic force microscopy‐based technique specifically developed for the task. The capability of such a technique for single‐point thermoacoustic measurements is first verified on carbon nanotubes layers with two electrodes for injecting alternate electric current. The technique is then demonstrated to allow the acquisition, simultaneously with the topography, of images reflecting the pressure of the acoustic wave at fixed distance from the sample. Such a capability is used to collect images reflecting the amplitude of acoustic waves generated by isolated nanotubes and nanotube bundles by the thermoacoustic effect.     

Lateral‐Polarity Structure of AlGaN Quantum Wells: A Promising Approach to Enhancing the Ultraviolet Luminescence

Aluminum‐gallium‐nitride alloys (Al _x Ga_{1– x} N, 0 ≤ x ≤ 1) can emit light covering the ultraviolet spectrum from 210 to 360 nm. However, these emitters have not fulfilled their full promise to replace the toxic and fragile mercury UV lamps due to their low efficiencies. This study demonstrates a promising approach to enhancing the luminescence efficiency of AlGaN multiple quantum wells (MQWs) via the introduction of a lateral‐polarity structure (LPS) comprising both III and N‐polar domains. The enhanced luminescence in LPS is attributed to the surface roughening, and compositional inhomogeneities in the N‐polar domain. The space‐resolved internal quantum efficiency (IQE) mapping shows a higher relative IQE in N‐polar domains and near inversion domain boundaries, providing strong evidence of enhanced radiative recombination efficiency in the LPS. These experimental observations are in good agreement with the theoretical calculations, where both lateral and vertical band diagrams are investigated. This work suggests that the introduction of the LPS in AlGaN‐based MQWs can provide unprecedented tunability in achieving higher luminescence performance in the development of solid state light sources.