Perfluoropolyether polymers by UV curing: design,synthesis and characterization

Perfluoropolyether (PFPE) structures can be functionalized with acrylic groups using appropriate hydrogenated acrylic monomers: the macromers obtained are highly reactive under UV irradiation, and fluorinated polymers can be obtained. In the first part of this work is described the synthesis of new PFPE (meth)acrylic oligomers by extending OH‐terminated fluorinated chains with urethane groups and reactive acrylic functions. The photopolymerization reaction of each product is then reported followed by the characterisation of the main thermal, mechanical and surface properties of UV‐cured coatings. The polymers have good thermal resistance and fair mechanical and chemical resistance. More interestingly they show very low refractive index and low surface tension. For these latter properties the products can be advantageously used in highly demanding applications such as photonic devices and nano‐patterning. Copyright © 2011 Society of Chemical Industry     

Use of cryogenic machining to improve the adhesion of sphene bioceramic coatings on titanium substrates for dental and orthopaedic applications

Rods of commercially pure titanium were machined using standard oil-based emulsion and cryogenic cooling, and were then coated with sphene (CaTiSiO₅) bioceramic by spray coating using an automatic airbrush. The sphene bioceramic was synthesized in-situ starting from a suspension of polysiloxane that used as SiO₂ precursor, CaCO₃ and TiO₂ nanoparticles. The suspension was deposited on the machined substrates, which were heat treated up to 950?°C in order to promote the formation of sphene ceramic. The produced coated prototypes were characterized to evaluate the effect of the machining conditions on surface roughness and microstructure of the substrate, and thereby their effect on coating adhesion. Nanoindentation tests were employed to determine the hardness and elastic modulus of the coating through its thickness. Results showed that the reduced amount of defects on the surface of the cryo-machined substrates, contributed to increase the hardness, elastic modulus and adhesion strength of the coating-substrate interfaces compared to standard machined samples, therefore improving adhesion of the coating to the underlying substrate.     

Measuring institutional research productivity for the life sciences: the importance of accounting for the order of authors in the byline

Accurate measurement of institutional research productivity should account for the real contribution of the research staff to the output produced in collaboration with other organizations. In the framework of bibliometric measurement, this implies accounting for both the number of co-authors and each individual’s real contribution to scientific publications. Common practice in the life sciences is to indicate such contribution through the order of author names in the byline. In this work, we measure the distortion introduced to university-level bibliometric productivity rankings when the number of co-authors or their position in the byline is ignored. The field of observation consists of all Italian universities active in the life sciences (Biology and Medicine). The analysis is based on the research output of the university staff over the period 2004–2008. Based on the results, we recommend against the use of bibliometric indicators that ignore co-authorship and real contribution of each author to research outputs.     

Mechanical Properties of an Fe‐Based SAM2×5‐630 Metallic Glass Matrix Composite with Tungsten Particle Additions

We present the role of tungsten additions on the mechanical properties of a Fe‐based structural amorphous metal (SAM2×5‐630) containing crystalline tungsten. Matrix cracking by microindentation is inhibited by the addition of tungsten and indicates that tungsten improves the fracture toughness. Response surfaces from nanoindentation arrays indicate that the hardness and modulus of the matrix phase are increased by tungsten additions. Bulk composites with 30 vol% tungsten subjected to 4‐point flexure exhibited brittle fracture behavior and the characteristic strength and Weibull modulus were 165 and 8.7 MPa, respectively. The addition of tungsten did not cause devitrification of the matrix phase.     

Corticosteroids in liver and urine in Sicilian cattle by a LC-MS/MS method

The presence of corticosteroid residues was assessed in urine and liver samples from livestock of Sicily. A total of 630 bovine samples were collected from farms and slaughterhouses. The samples were analysed using solid-phase extraction (SPE) coupled with ultra-performance liquid chromatography tandem mass spectrometry (UHPLC–MS/MS). All the corticosteroids found were under the maximum residue limit imposed by Commission Regulation (EC) 37/2010. About 4% of liver samples showed dexamethasone levels above the limit of detection (LOD), with a mean of 1.5 ± 0.2 µg kg^?1. Betamethasone was found only in seven liver samples, with a mean of 1.6 ± 0.1 µg kg^?1. Furthermore, prednisolone and prednisone were found only in urine and liver samples from slaughterhouse, probably related to the high rate of stress for bovines. These results suggest good control practices adopted by Sicilian farms, able to ensure the quality of food products.     

Zinc supplementation of Friesian cows: Effect on chemical-nutritional composition and aromatic profile of dairy products

Zinc represents an essential microelement for several biochemical mechanisms. The body's inability to store zinc necessarily requires a constant dietary supply to avoid alteration of physiological functions. The aim of the present study was to investigate the effect of dietary enrichment with zinc on chemical-nutritional and aromatic properties of milk and cheese. Thirty commercial dairy cows, balanced for parity, milk production, and days in milk, were randomly assigned to 2 groups. The control group was fed with a conventional complete diet (22 kg of dry matter/animal per day), whereas the experimental group received a daily zinc supplementation of 60 mg per kg of dry complete feed. During the experimental period, the milk yield was monitored and samples of milk and caciotta cheese were collected to obtain information about the chemical-nutritional composition and aromatic profile. Dietary zinc integration did not influence milk yield and composition, but induced a marked reduction of somatic cell count and improved the oxidative stability of ripened caciotta cheese. In both milk and cheese, the experimental group samples were characterized by a lower concentration of saturated fatty acids and an increase in oleic acid, vaccenic acid, and rumenic acid. The aromatic profile of dairy products was also positively affected by dietary zinc intake, with an increase in concentration of carboxylic acids, aldehydes, and esters. The present results suggest a positive role of zinc in improving animal health and nutraceutical properties of milk and corresponding cheese. Taking into account the analysis of volatile compounds, zinc dietary supplementation of dairy cows should contribute to the production of cheeses with interesting organoleptic properties, although more studies are necessary to confirm the consumer acceptability of these changes.     

Highly Sensitive Sensors for the Detection of Nitro Compounds Based on Pyrene Labeled Dendrons

In this paper, we describe the synthesis and characterization of four novel pyrene labeled compounds, some of them dendritic, which can act as potential sensors for the detection of nitro compounds in methanol solution. Methanol was selected as solvent due to its polar properties, which provide similar characteristics to water. The obtained pyrene labeled molecules (PyOH, Pytb, PyNK1OH and PyNK1tb) were studied by UV–Vis and steady state fluorescence spectroscopy. Their application as sensors has been tested with three different nitro compounds: nitrobenzene, 1-chloro-2,4-dinitrobenzene and nitromethane. PyOH and Pytb showed a detection concentration limit for the analyzed quenchers in the order of nM, making these compounds suitable for high-sensitive sensoring. PyNK1OH and PyNK1tb displayed high sensibility at µM concentration. All the sensors showed an accurate response towards quencher analytes.