Morphology and mechanical properties of amine-terminated butadiene-acrylonitrile/epoxy blends

Morphology and mechanical properties of (amine terminated butadiene acrylonitrile rubber/diglycidyl ether of bis-phenol-A epoxy resin) blends of different compositions, cured in wide range of temperatures, are described. Curing at low temperature promoted formation of homogeneous materials with poor fracture resistance. On the contrary, at high temperature tough heterogeneous blends were obtained. Such blends showed phase inversion above 20 percent of rubber. The volume fraction of precipitated phase, determined on SEM micrographs, was higher than the amount of added rubber. A fracture mechanism to account for this is proposed. Extensive voiding and interface damage were observed in the low temperature cured materials. Such phenomena did not contribute to the fracture energy.     

A local landscape mapping method for protein structure prediction in the HP model

The hydrophobic-polar (HP) model has been widely studied in the field of protein structure prediction both for theoretical purposes and as a benchmark for new optimization strategies. In this work we present results of the recently proposed Hybrid Monte Carlo Ant Colony Optimization heuristic in the HP model using a fragment assembly-like strategy. Moreover we extend that method introducing a general framework for optimization in the HP model, called Local Landscape Mapping, and we test it using the pull moves set to generate solutions. We describe the heuristic and compare results obtained on well known HP instances in the 3-dimensional cubic lattice to those obtained with standard Ant Colony optimization and Simulated Annealing. Fragment assembly-like tests were performed using a modified objective function to prevent the creation of overlapping walks. Results show that our method performs better than the other heuristics in all benchmark instances when the fragment assembly-like strategy is used while in the case of pull moves-based neighborhood its performance is comparable to that of simulated annealing.     

Alder ene functionalization of polyisobutene oligomer and styrene-butadiene-styrene triblock copolymer

The Alder ene functionalization reaction of double bonds containing macromolecules such as polyisobutene oligomer (PIB) and a styrene-butadiene-styrene triblock copolymer (SBS) samples with maleic anhydride (MAH) or diethyl maleate (DEM) as enophiles is described. The analysis of the products by means of different techniques assesses the addition of the polar molecules to the reactive vinylidene units of the polymer with functional degrees (FD) depending on the type of enophile and polymer reactivity. The role of the reaction conditions and the use as Lewis acids as catalysts are discussed in terms of their influence on the addition reaction extent and on the polymer molecular weight.     

Modelling formation and growth of H2SO4-H2O aerosols: Uncertainty analysis and experimental evaluation

An aerosol dynamics model, AERO2, is presented, which describes the formation of H₂SO₄-H₂O aerosol in a smog chamber. The model is used to analyse how the uncertainties on four input parameters are propagated through an aerosol dynamics model. The input parameters are: the rate of the reaction between SO₂ and OH (k₁), the ratio between the nucleation rate used in AERO2 and that derived from classical nucleation theory (t_n), the H₂SO₄ mass accommodation coefficient () and a measure of the turbulence intensity in the reactor (k_e). Uncertainties for these parameters are taken from the literature. One of the results of the analysis is that AERO2 and aerosol dynamics models in general can only predict upper bounds for the total number (N_tot) and total volume (V_tot) concentrations of the particles. The uncertainties on N_tot and V_tot are mainly due to the uncertainties on k₁, and t_n. An uncertainty factor of 20–100 still remains when the uncertainty on k₁, is reduced to ±5%. Aerosol measurements from three smog chamber experiments have therefore been used, in an attempt to reduce the uncertainty on k₁ and t_n. Values for k₁ are obtained in the reduced range 7.8 × 10⁻¹³ to 1.0 × 10⁻¹² cm³ s⁻¹, which is within the range found in the literature. For t_n, values in the range 10⁴–10⁷ are obtained, which is close to the upper bound of the range in literature. These values for t_n are in marked contrast with a recent set of experiments on nucleation in H₂SO₄-H₂O mixtures, which suggests a value for t_n of at most 10⁻⁵.     

Influence of dietary long-chain PUFA on premature baboon lung FA and dipalmitoyl PC composition

One of the major survival challenges of premature birth is production of lung surfactant. The lipid component of surfactant, dipalmitoyl PC (DPPC), increases in concentration in the period before normal term birth via a net shift in FA composition away from unsaturates. We investigated the influence of dietary DHA and arachidonic acid (AA) on lung FA composition and DPPC concentration in term and preterm baboons. Pregnant animals/neonates were randomized to one of four groups: breast-fed (B), term formula-fed (T⁻), preterm formulafed (P⁻), and preterm fed formula supplemented with DHA-AA (P⁺). Breast milk contained 0.68%wt DHA and the P⁺ group formula contained 0.61%wt DHA. In the preterm groups (P⁻ and P⁺), pregnant females received a course of antenatal corticosteroids. At the adjusted age of 4 wk, neonate lung tissue was harvested, and FA composition and DPPC were analyzed. Palmitate was ∼28%wt of lung total FA and no significant differences were found among the four treatment groups. In contrast, DPPC in the B group lung tissue was significantly greater than DPPC in the unsupplemented groups, but not compared with the P⁺ group. The B and P⁺ groups were not significantly different in DHA and AA, but were different compared with the unsupplemented (T, P⁻) groups. These results indicate that LCP supplementation increases lung DHA and AA, without compromising overall lung 16∶0 or DPPC. The shift in FA composition toward greater unsaturation in the groups consuming LCP supported improved surfactant lipid concentration in preterm neonate lungs.     

Morphology and thermal properties of two polymethacrylates modified by a polymer liquid crystal

We have studied blends of a polymer liquid crystal (PLC) with poly(cyclohexylethyl methacrylate) (PCHEMA) or poly(cyclohexylpropyl methacrylate) (PCHPMA). The PLC is PET/0.6PHB where PET = poly(ethylene terephthalate), PHB = p-hydroxybenzoic acid and 0.6 is the mole fraction of the latter in the copolymer. The microstructure was studied by scanning electron microscopy (SEM). PCHEMA + PLC (20 wt% of the latter, blend E) has a fine texture with LC islands evenly distributed in the matrix and good adhesion between the phases resulting from their partial miscibility. The PCHPMA + PLC (20 wt% of the latter, blend P) shows only limited compatibility. The SEM results are confirmed by values of the glass transition temperatures T_g determined via thermal mechanical analysis. The T_g value of the blend E is shifted towards the T_g of PLC; T_g of blend P is practically equal to that of PCHPMA. The linear isobaric expansivity α_L values for both blends are lower than the respective values for pure PCHPMA and PCHEMA. Thermal stabilities of the blends determined by thermogravimetry are also better than those of pure polymethacrylates. The temperature of 50% weight degradation for blend E is higher than that for pure PCHEMA by more than 60 K Copyright © 2004 Society of Chemical Industry     

The KlaperSuite framework for model-driven reliability analysis of component-based systems

Automatic prediction tools play a key role in enabling the application of non-functional requirements analysis, to simplify the selection and the assembly of components for component-based software systems, and in reducing the need for strong mathematical skills for software designers. By exploiting the paradigm of Model-Driven Engineering (MDE), it is possible to automatically transform design models into analytical models, thus enabling formal property verification. MDE is the core paradigm of the KlaperSuite framework presented in this paper, which exploits the KLAPER pivot language to fill the gap between design and analysis of component-based systems for reliability properties. KlaperSuite is a family of tools empowering designers with the ability to capture and analyze quality of service views of their systems, by building a one-click bridge towards a number of established verification instruments. In this article, we concentrate on the reliability-prediction capabilities of KlaperSuite and we evaluate them with respect to several case studies from literature and industry.     

Invertebrate response to impacts of water diversion and flow regulation in high‐altitude tropical streams

Water supply systems are critical infrastructure that provides food and energy security for developed societies. The operation of reservoirs (flow regulation) and water intakes (water diversion) has known negative impacts on aquatic ecosystems; however, quantification of ecological impacts and examination of these two types of flow alteration remain a developing area of research. We investigated the individual and combined impact of flow regulation and water diversion on stream ecosystem integrity, the freshwater macroinvertebrate community, and the population structure of flow‐sensitive insects. For 2 years, we monitored quarterly discharge, physical and chemical stream conditions, and benthic invertebrates of four high‐altitude tropical streams that are part of the water supply system of Quito, Ecuador. Flow regulation caused a loss of the hydrological seasonality of these streams, including a decrease in stream depth and biotic quality. Water diversion caused a decrease in dissolved oxygen and overall ecosystem integrity. Freshwater invertebrate density and richness decreased as a result of water diversion and flow regulation. The combined flow alteration in these streams decreased the density of nymphal stages of the widely distributed mayfly Andesiops peruvianus. Given the societal needs for food and energy security, water management for diversion (e.g., irrigation) and in‐line storage practices (e.g., hydroelectric dams) are anticipated to increase. This research suggests that the negative environmental impacts of flow alteration could be mitigated with discharge releases designed to approximate the natural hydrologic regime of undisturbed streams.     

Moral und Abhängigkeit

Definition of the problem:

Being satisfied with one’s work depends on professional autonomy, which is attributed to the medical profession to a high degree, combined with specialized knowledge and moral authority for vital questions. That is why physicians enjoy a high reputation. At the beginning of a person's medical career, moral competence is developed nearly completely, but specialized knowledge must be learned. Hospitals, in which further medical education regularly takes place, are still traditionally hierarchically organized today. Unfortunately, feudalistic or military structures hinder autonomous moral decisions and cause structural irresponsibility.

Arguments:

Obstructions and pressure by superiors, financial restrictions, arrogance and trying to make one's mark are shown in typical conflict situations. Stress, discontent, moral conflicts and illness, even including burn out are possible. Commitment and creativity by employees are prevented and mistakes cannot be constructively managed. Thus, patients may suffer unreasonably or be hurt.

Conclusion:

There is a risk to subordinate moral principles under other interests, not only with subordinates but also with superiors. Ways to create a culture that promotes autonomy among physicians and between different professions are discussed. Therefore it is necessary to institutionalize communication based on a reciprocal high regard in a team with people treated as equal partners, who are then able to discuss moral questions in a discourse.     

Evaluation of the salt leaching method for the production of ethylene propylene diene monomer rubber foams

The thermomechanical behavior of ethylene propylene diene monomer (EPDM) foams produced with the salt leaching method has been investigated and compared with the behavior of EPDM foams obtained from conventional blowing agents. Moreover, the salt-leaching process has been optimized to minimize salt residues and the influence of different parameters (such as average particle size and particle size distribution) has been investigated. Scanning electron microscopy and density measurements highlighted that salt-leaching leads to the formation of open-cell porosity with cell dimensions of around 60 to 80 μm, while foams obtained with the two traditional foaming agents lead to closed-cell porosity. Compression set values indicate that the behavior of the foams produced with salt leaching are more similar to the unfoamed rubber, characterized by higher elasticity and low residual deformation. Two theoretical models were successfully applied to the compression curves (Mooney-Rivlin and Exponential-Logarithmic) and they highlighted the effect of foaming on the properties of EPDM rubber and in particular the higher chain extensibility obtained through the salt leaching foaming method.