Synthesis and magnetic properties of nano-sized Cu0.5Ni0.5Fe2O4 via citrate and aloe vera: A comparative study

In this report, Cu_0.5Ni_0.5Fe₂O₄ nanoparticles were synthesized by solgel using eco-friendly aloe vera extract and citric acid separately and their properties were discussed. Structural, Functional, morphological, magnetic properties of the samples were characterized using X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Transmission electron microscopy (TEM), Vibrating sample magnetometer (VSM). XRD exhibited the samples have single phase cubic spinel with average size of 46.4?nm and 35.45?nm. Two characteristics bands of ferrite were confirmed by FTIR. TEM indicated different morphology of the samples with some regularity. VSM data showed that higher coercivity for the sample prepared by aloe vera extract.     

A comparative study of photocatalytically active nanocrystalline tetragonal zyrcon-type and monoclinic scheelite-type bismuth vanadate

Monoclinic scheelite-type BiVO₄ is currently considered as one of the most promising non-titania photocatalysts, wheras tetragonal zircon-type BiVO₄ is still poorly understood. Herein, a new and simple synthetic approach was applied and nanostructured single-phase zircon-type BiVO₄ was successfully prepared by a controllable ethylene-glycol colloidal route. In addition, nanostructured monoclinic scheelite-type BiVO₄ powders were also fabricated through annealing of the as-prepared samples. A comparative study of the two BiVO₄ polymorphs was conducted and it turned out that the novel synthetic approach had a significant impact on porosity and photocatalytic performance of zircon-structured BiVO₄. All the prepared materials, as-prepared and annealed, were mesoporous, while measured values of specific surface area of some zircon-structured samples (～34?m²/g) were ～7 times higher than those reported thus far for this phase. Interestingly, for the first time, zircon-type BiVO₄, previously considered to be a poor photocatalyst, exhibited a better overall performance in degradation of methyl orange compared to monoclinic scheelite-type BiVO₄. Hence, it could be expected that the here-presented synthesis and observations will both arouse interest in scarcely studied tetragonal zircon-type BiVO₄ and facilitate as well as speed up further research of its properties.     

One-step decomposition method for numerical integration of short- and long-term dynamics

A mathematical model is derived and disdussed that represents the structural properties of the alternative linearity and of the triangular block structural connectivity of the sets of differential equations, associated with the machines in the numerical integration of short- and long-term dynamics. In order to take into consideration the structural properties of the model, a one-step decomposition method for the numerical integration of short- and long-term dynamics is proposed. The method can be applied not only to the numerical integration of short- and long-term dynamics but also to all other cases when the model of the dynamic system is alternative-linear and triangular block connected. Numerical stability, accuracy and computation speed are the major advantages of this method, making it suitable for many applications, including the dynamic security analysis of power systems.     

Amphiphilic Properties of Dodecylammonium Chloride/4-(1-Pentylheptyl) Benzene Sodium Sulfonate Aqueous Mixtures and Study of the Catanionic Complex

Surfactants are often used in supramolecular chemistry, due to their ability to self-organize. Surfactant molecules aggregate spontaneously and reversibly to adopt a defined intermolecular arrangement. In this work, general phase behavior, adsorption and association in aqueous mixtures of dodecylammonium chloride, DACl and sodium 4-(1-pentylheptyl) benzenesulfonate, NaDBS, were studied by a combination of techniques including surface tension and conductivity measurements, light scattering and optical microscopy. The strong synergistic properties of the system were brought out with the Regular Solution Theory. Various colloidal objects are observed in wide range of composition: conventional small vesicles, large giant multilamellar or multivesicular vesicles. An excess of NaDBS provides extremely large tubular and elongated multilamellar vesicles. The new catanionic 1:1 complex, dodecylammonium-4-(1-pentylheptyl) benzenesulfonate, formed in the equimolar conditions is a result of intramolecular charge neutralization. The thermal properties of this solid compound were examined by thermal polarizing microscopy, differential scanning calorimetry, and X-ray diffraction. The most probable ion-pair amphiphilic cluster of the crystal smectic phase, at room temperature, consists of ionic groups formed in ordered layers with dodecyl chains packed into somewhat disordered layers, tilted to the layer plane.     

Anticancer Potential of (Pentamethylcyclopentadienyl)chloridoiridium(III) Complexes Bearing κP and κP,κS‐Coordinated Ph2PCH2CH2CH2S(O)xPh (x=0–2) Ligands

Iridium(III) complexes of the type [Ir(η⁵‐C₅Me₅)Cl₂{Ph₂PCH₂CH₂CH₂S(O)_xPh‐κP}] (x=0–2; 1 – 3 ) and [Ir(η⁵‐C₅Me₅)Cl{Ph₂PCH₂CH₂CH₂S(O)_xPh‐κP,κS}][PF₆] (x=0–1; 4 and 5 ) with 3‐(diphenylphosphino)propyl phenyl sulfide, sulfoxide, and sulfone ligands Ph₂PCH₂CH₂CH₂S(O)_xPh were designed, synthesized, and characterized fully, including X‐ray diffraction analyses for complexes 3 and 4 . In vitro studies against human thyroid carcinoma (8505C), submandibular carcinoma (A253), breast adenocarcinoma (MCF‐7), colon adenocarcinoma (SW480), and melanoma (518A2) cell lines provided evidence for the high biological potential of the neutral and cationic iridium(III) complexes. Neutral iridium(III) complex 5 proved to be the most active, with IC₅₀ values up to about 0.1 μM , representing activities of up to one order of magnitude higher than cisplatin. Using 8505C cells, apoptosis was shown to be the main mechanism through which complex 5 exerts its tumoricidal action. The described iridium(III) complexes represent potential leads in the search for novel metal‐based anticancer agents.     

Thermoplastic polyurethane elastomers from modified oleic acid

Two novel potentially biodegradable thermoplastic polyurethane elastomers with unique structure and morphology were prepared from modified oleic acid. The hardness and mechanical properties were controlled by adjusting the soft segment concentration (SSC). Epoxidized methyl oleate was converted to methyl‐9‐ or ?10‐hydroxystearate (hydroxystearate) by catalytic hydrogenation. The formed hydroxystearate was transesterified with 1,6‐hexanediol to obtain polyesterpolyol with molar mass 2500. Segmented polyurethanes with 50% and 70% SSC were prepared using the prepolymer method by reacting polyesterpolyol with diphenylmethane diisocyanate and 1,4‐butanediol as chain extender. Thermal and mechanical properties of the polymers indicated good micro‐phase separation. Both soft and hard segments displayed a certain degree of crystallization. Tensile strengths were 18 and 2.4 MPa for samples with 50% and 70% SSC, respectively. Elongations of 130% (50% SSC) and 43% (70% SSC) were somewhat lower than in comparable materials, presumably due to lower molar mass. © 2014 Society of Chemical Industry     

Mechanochemical synthesis of YNbO4:Eu nanocrystalline powder and its structural,microstructural and photoluminescence properties

In this research we prepared nanocrystalline YNbO₄:Eu³⁺ phosphor, i.e. nanophosphor, powder using an efficient mechanochemical method followed by annealing. X-ray diffraction analysis revealed that YNbO₄:Eu³⁺ crystallizes in monoclinic structure C2/c where, from the point of view of A and B in ABO₄ compounds, cation coordination can be noted as [6+2, 4+2]. Crystallite size of about 40 nm, was estimated using Debye Scherrer's equation. Raman spectroscopy with 785 and 532 nm excitation wavelengths is performed to record a majority of materials phonon modes and to provide more in depth understanding of the YNbO₄ structure. Scanning electron microscopy observations indicate that the mechanical treatment during synthesis is causing non-uniformity of the powder microstructure. High resolution photoluminescent measurements upon UV excitation showed intense emission coming from f–f transitions of the europium ion with the lifetime of 0.68 ms, suggesting that the obtained YNbO₄:Eu³⁺ is a good potential phosphor. A comparison of emissive properties with microcrystalline YNbO₄:Eu³⁺ was made and it showed higher values of emission intensity and lifetime of the nanocrystalline sample.     

Kinetics of Isothermal Ethanol Adsorption onto a Carbon Molecular Sieve under Conventional and Microwave Heating

The isothermal kinetics of ethanol adsorption from aqueous solution onto a zeolite type carbon molecular sieve (CMS‐3A) under conventional heating (CH) and microwave heating (MWH) was investigated. The adsorption kinetics is described by the model of a phase‐boundary controlled reaction for both heating modes. The activation energy (E_a) for the adsorption process under MWH is lower than under CH while the preexponential factor (lnA) is higher. Ethanol adsorption is a kinetically complex process whose complexity changes with the mode of heating. The established decrease in E_a and increase in lnA under MWH compared to CH is explained with the increase in the ground vibrational level of the – OH twisting vibrations in the ethanol molecule and with the decrease in its anharmonicity factor which is caused by the selective resonant transfer of energy from CMS‐3A to the OH oscillators.     

Influence of calcium carbonate filler and mixing type process on structure and properties of styrene–acrylonitrile/ethylene–propylene–diene polymer blends

The properties of styrene–acrylonitrile (SAN) and ethylene–propylene–diene (EPDM) blends containing different types of calcium carbonate filler were studied. The influence of mixing type process on the blend properties was also studied. Two different mixing processes were used. The first one includes mixing of all components together. The other process is a two‐step mixing procedure: masterbatch (MB; EPDM/SAN/filler blend) was prepared and then it was mixed with previously prepared polymer blend. Surface energy of samples was determined to predict the strength of interactions between polymer blend components and used fillers. The phase morphology of blends and their thermal and mechanical properties were studied. From the results, it can be concluded that the type of mixing process has a strong influence on the morphological, thermal, and mechanical properties of blends. The two‐step mixing process causes better dispersion of fillers in blends as well as better dispersion of EPDM in SAN matrix, and therefore, the finest morphology and improved properties are observed in blends with MB. It can be concluded that the type of mixing process and carefully chosen compatibilizer are the important factors for obtaining the improved compatibility of SAN/EPDM blends. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012