Maximum power point tracker based on maximum power point resistance modeling

This paper presents a new, simple, accurate, and inexpensive practical methodology and experimental solution for the modeling of conventional (domestic and commercial facilities) photovoltaic generators (PVG), so that they can work at their maximum power point (MPP). The PVG may be a panel, an array of panels, or a photovoltaic field. As a starting restriction (actual) it has to be assumed that it is not possible to isolate the PVG variables dependence (mainly current, voltage, and hence power) with solar radiation and temperature, because they are highly correlated. This methodology proposes the modeling facility on its MPP by its MPP resistance (R_MPP = V_MPP/I_MPP), being V_MPP and I_MPP the voltage and current of the PVG, respectively, at its MPP. The analysis shows, by simulation first and then experimentally, that R_MPP does not present significant temperature dependencies, at least in the usual range. This important result allows us to model the PVG only in terms of solar radiation. From a set of experimental data, different models to estimate R_MPP are proposed. The obtained results are very accurate. These models allow an immediate practical application that it is also developed in the paper: MPP tracker (MPPT) design by the calculation of the DC/DC converter duty cycle which places the PVG at its MPP directly and continuously. This new methodology and experimental system has been registered in the Spanish Patent and Trademark Office with the number P201530352. Copyright © 2015 John Wiley & Sons, Ltd.     

Amine-impregnated natural zeolite as filler in mixed matrix membranes for CO2/CH4 separation

Flat mixed matrix membranes (MMMs) comprising polysulfone and clinoptilolite-type natural zeolite were prepared by casting. Zeolite was modified with three alkylamines: ethanolamine (EA), bis(2-hydroxypropyl)amine (BHPA), and polyethylenimine (PEI) by the impregnation method. Impregnated zeolite samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and N₂ adsorption–desorption. The alkylamine loading extent determined by thermogravimetric analysis was 5.2, 4.8, and 8.5% for EA, BHPA, and PEI, respectively. Analyses of MMMs showed that the incorporation of impregnated zeolite affected the glass-transition temperature (T_g) and mixed-gas transport properties. In this regard, a decreasing trend of the T_g values from 185.5 °C for the polymeric membrane up to 176.6 °C for Clino-EA-based MMM was recorded. In addition, the gas separation performance was evaluated at two different feed pressures. At 50 psi, MMMs showed an enhancement up to 30% on the CO₂ permeability (22.79 Barrer) and 55% on the CO₂/CH₄ selectivity (45.78) in comparison with the polymeric membrane (CO₂ permeability 17.34 Barrer; CO₂/CH₄ selectivity 29.38). These values varied depending on the alkylamine, BHPA being the most selective. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48286.     

Assessment of fiber arrangement and contiguity in composite materials by image analysis

The overall objective of this research was to correlate the processing—fiber arrangement—properties relationships of composites. In order to do this, an experimental technique to quantitatively characterize the fiber arrangement was developed. Using this technique, the compression molded graphite/epoxy composites, CMC, were found to have a standard deviation of fiber spacing of about twice the value of those from the simulated random composites, SRC. The standard deviation of fiber volume fraction for CMC was about 4 times the value of SRC. In other words, the fibers in this laboratory CMC were poorly distributed relative to SRC.     

Disrupting the methionine biosynthetic pathway in Candida guilliermondii: characterization of the MET2 gene as counter‐selectable marker

Candida guilliermondii (teleomorph Meyerozyma guilliermondii) is an ascomycetous species belonging to the fungal CTG clade. This yeast remains actively studied as a result of its moderate clinical importance and most of all for its potential uses in biotechnology. The aim of the present study was to establish a convenient transformation system for C. guilliermondii by developing both a methionine auxotroph recipient strain and a functional MET gene as selection marker. We first disrupted the MET2 and MET15 genes encoding homoserine‐O‐acetyltransferase and O‐acetylserine O‐acetylhomoserine sulphydrylase, respectively. The met2 mutant was shown to be a methionine auxotroph in contrast to met15 which was not. Interestingly, met2 and met15 mutants formed brown colonies when cultured on lead‐containing medium, contrary to the wild‐type strain, which develop as white colonies on this medium. The MET2 wild‐type allele was successfully used to transfer a yellow fluorescent protein (YFP) gene‐expressing vector into the met2 recipient strain. In addition, we showed that the loss of the MET2‐containing YFP‐expressing plasmid can be easily observed on lead‐containing medium. The MET2 wild‐type allele, flanked by two short repeated sequences, was then used to disrupt the LYS2 gene (encoding the α‐aminoadipate reductase) in the C. guilliermondii met2 recipient strain. The resulting lys2 mutants displayed, as expected, auxotrophy for lysine. Unfortunately, all our attempts to pop‐out the MET2 marker (following the recombination of the bordering repeat sequences) from a target lys2 locus were unsuccessful using white/brown colony colour screening. Nevertheless, this MET2 transformation/disruption system represents a new versatile genetic tool for C. guilliermondii. Copyright © 2014 John Wiley & Sons, Ltd.     

Microstructural Evolution in Liquid-Phase-Sintered SiC: Part III, Effect of Nitrogen-Gas Sintering Atmosphere

Effects of N₂ sintering atmosphere and the starting SiC powder on the microstructural evolution of liquid-phase-sintered (LPS) SiC were studied. It was found that, for the β-SiC starting powder case, there was complete suppression of the β→α phase transformation, which otherwise goes to completion in Ar atmosphere. It was also found that the microstructures were equiaxed and that the coarsening was severely retarded, which was in contrast with the Ar-atmosphere case. Chemical analyses of the specimens sintered in N₂ atmosphere revealed the presence of significant amounts of nitrogen, which was believed to reside mostly in the intergranular phase. It was argued that the presence of nitrogen in the LPS SiC helped stabilize the β-SiC phase, thereby preventing the β→α phase transformation and the attendant formation of elongated grains. To investigate the coarsening retardation, internal friction measurements were performed on LPS SiC specimens sintered in either Ar or N₂ atmosphere. For specimens sintered in N₂ atmosphere, a remarkable shift of the grain-boundary sliding relaxation peak toward higher temperatures and very high activation energy values were observed, possibly due to the incorporation of nitrogen into the structure of the intergranular liquid phase. The highly refractory and viscous nature of the intergranular phase was deemed responsible for retarding the solution–reprecipitation coarsening in these materials. Parallel experiments with specimens sintered using α-SiC starting powders further reinforce these arguments. Thus, processing of LPS SiC in N₂ atmosphere open the possibility of tailoring their microstructures for room-temperature mechanical properties and for making high-temperature materials that are highly resistant to coarsening and creep.     

Mechanical and thermal characterization of as-received recycled polyethylene filled with rice husk and their relationship to the end use of these composites

ABSTRACT

Waste can be considered a crisis across the world, especially in the Global South where landfills are collapsing and vector-borne illnesses are increasing. Due to the increase in the amount of waste plastic in the environment, different uses of recycled plastics are being investigated. One such use is roofing tiles. This has been put in place in Sri Lanka through the Waste for Life organization. Here, recycled polyethylene is filled with rice husk particles. Due to the hydrophilic nature of the rice husk, the strength of the polyethylene composites decreased with increasing rice husk filler. Since the roofing tiles do not need to support a large load, the loss in strength should not be too detrimental. However, the creep behavior was improved with 10% and 20% filler. This is important in that the temperature on the roof can reach high temperatures.     

Microstructural Evolution in Liquid-Phase-Sintered SiC: Part I, Effect of Starting Powder

The effect of starting SiC powder (β-SiC or α-SiC), with simultaneous additions of Al₂O₃ and Y₂O₃, on the microstructural evolution of liquid-phase-sintered (LPS) SiC has been studied. When using α-SiC starting powder, the resulting microstructures contain hexagonal platelike α-SiC grains with an average aspect ratio of 1.4. This anisotropic coarsening is consistent with interface energy anisotropy in α-SiC. When using β-SiC starting powder, the β→α phase transformation induces additional anisotropy in the coarsening of platelike SiC grains. A strong correlation between the extent of β→α phase transformation, as determined using quantitative XRD analysis, and the average grain aspect ratio is observed, with the maximum average aspect ratio reaching 3.8. Based on these observations and additional SEM and TEM characterizations of the microstructures, a model for the growth of these high-aspect-ratio SiC grains is proposed.     

Adsorption of 4-chlorophenol by inexpensive sewage sludge-based adsorbents

Sewage sludge was used as precursor to develop a potential inexpensive adsorbent by both simple drying and pyrolysis. The resulting materials were evaluated as adsorbents for the removal of 4-chlorophenol (4-CP) from aqueous solution. The dried biosolids showed a BET surface area lower than 3 m²/g, which yield a maximum adsorption capacity of 0.73 mmol 4-CP/g at pH 5.0 and 15 °C. The carbonization of biosolids under relatively mild conditions allowed obtaining materials with BET surface area up to 45 m²/g, which led to a significant increase of the maximum adsorption capacity (1.36 mmol 4-CP/g). The high ash content of the starting material (23%, d.b.) limits the development of porosity on a total dry-weight basis. Adsorption data were well fitted to the Redlich–Peterson isotherm equation whereas the most commonly used Langmuir and Freundlich equations were less satisfactory probably because of the occurrence of summative adsorption phenomenon. A thermodynamic study of the adsorption showed the spontaneous and exothermic nature of the process. Thus, simple drying and carbonization provide two ways of valorization of sewage sludge through its conversion into inexpensive low-rank adsorbents potentially useful for the removal of some hazardous water pollutants, like chlorophenols and related compounds.     

Changes in the milk and cheese fat composition of ewes fed commercial supplements containing linseed with special reference to the CLA content and isomer composition

A study was carried out to increase the CLA contents in ewes’ milk fat under field conditions by dietary means and to investigate the extent of the changes and consequences for milk processing and cheese quality. During a 3-mon period, ewes’ bulk milk samples were collected every week from two different herds. For the first 4 wk the ewes were fed a conventional diet. Then the following 6 wk a supplement enriched in α-linolenate (whole linseed) was incorporated into the ovine diet. Finally, in the last 3 wk the feeding was the same as in the first 4 wk. The FA profile in milk fat was monitored by GC, and the distribution of CLA isomers was thoroughly tested by combining GC-MS of 4,4-dimethyloxazoline derivatives (DMOX) with silver ion-HPLC (Ag⁺-HPLC) of FAME. Reconstructed mass spectral profiles of CLA characteristic ions from DMOX were used to identify positional isomers, and Ag⁺-HPLC was used to quantify them. An increase in total CLA in milk fat was observed, and total CLA remained elevated during the weeks of enriched α-linolenate feeding. In our experimental conditions there was a linear relationship between trans-vaccenic acid (trans-11-octadecenoic acid; trans-11 18∶1) and 9-cis, 11-trans CLA in ewes’ milk fat. Concerning the CLA isomer profile, increases in the 11,13- and 12,14–18∶2 positional isomers were considerable when linseed was included in the diet. Organoleptic characteristics of cheeses made with CLA-enriched milk did not substantially differ from those made with nonsupplemented ewes’ milk. CLA total content and isomer profile did not change during ripening.     

Use of an environmental specimen bank for evaluating the impact of the Prestige oil spill on the levels of trace elements in two species of Fucus on the coast of Galicia (NW Spain)

In the present study we investigated possible contamination by trace elements due to the oil slick caused by the shipwreck of the Prestige oil tanker, in two species of brown macroalgae (Fucus vesiculosus and Fucus ceranoides) collected from the coastal area most severely affected by the spill (Galicia, NW Spain). The oil slick apparently did not cause significant increases in the concentrations of the trace elements studied, except vanadium. It appears that the magnitude of terrestrial inputs to coastal waters is sufficiently high to mask the inputs of trace elements from the fuel. The observed exception of V suggests that bioaccumulation of this element by the two species of Fucus may be used to indicate exposure to petrochemical products similar to the Prestige fuel. The findings of the study are another example of the importance of the existence of Environmental Specimen Banks for studies of this type.