Novel iterative equalization based on energy-spreading transform

In this paper, novel iterative equalization for intersymbol interference (ISI) channels is proposed. Different from the existing turbo equalization, the proposed one is based on energy-spreading transform (EST), which separates equalization and coding, and therefore works for uncoded systems. The complexity of the proposed scheme is comparable to that of decision-feedback equalization (DFE). However, analytical and simulation results demonstrate that its performance is very close to the matched-filter bound (MFB) when the signal-to-noise ratio (SNR) is above a threshold.     

A gain-clamped SOA with distributed Bragg reflectors fabricated under both ends of active waveguide with different lengths

We demonstrate a gain-clamped semiconductor optical amplifier (GC-SOA) which has gratings under both end regions of an active waveguide. Two gratings of the new GC-SOA are fabricated in different lengths. Their lasing modes and gain characteristics are measured and analyzed with different combinations of grating lengths. It shows different gain and noise characteristics according to the measurement direction in asymmetric grating combinations.     

Do component reliabilities depend on system size?

The basic assumption of Poisson-Weibull convergence in analyzing the reliability of large consecutive-k-out-of-n:F systems is questioned with respect to the relevance of its consequences to practical reliability theory     

Treating late-time instability of hybridfinite-element/finite-difference time-domain method

The hybrid finite element/finite-difference time-domain (FETD/FDTD) method previously proposed to handle arbitrarily shaped dielectric objects is employed to investigate electromagnetic problems of high Q systems for which the transient response over a very long duration is necessary. To begin with, the paper demonstrates that this hybrid method may suffer from late-time instability and spurious DC modes. Then an approach which combines the temporal filtering and frequency shifting techniques is presented to overcome sequentially and, respectively, the two drawbacks. Its accuracy is validated by the favorable comparison with several different methods for the analysis of resonant frequencies and and factors of the various modes in an isolated dielectric resonator. Finally, the present method is applied to calculate the scattering parameters on the microstrip line due to the presence of the cylindrical dielectric resonator     

A /spl Sigma/-/spl Delta/ fractional-N frequency synthesizer using a wide-band integrated VCO and a fast AFC technique for GSM/GPRS/WCDMA applications

A fractional-N frequency synthesizer (FNFS) in a 0.5-/spl mu/m SiGe BiCMOS technology is implemented. In order to operate in a wide-band frequency range, a switched-capacitors bank LC tank voltage-controlled oscillator (VCO) and an adaptive frequency calibration (AFC) technique are used. The measured VCO tuning range is as wide as 600 MHz (40%) from 1.15 to 1.75 GHz with a tuning sensitivity from 5.2 to 17.5 MHz/V. A 3-bit fourth-order /spl Sigma/-/spl Delta/ modulator is used to reduce out-of-band phase noise and to meet a frequency resolution of less than 3 Hz as well as agile switching time. The experimental results show -80 dBc/Hz in-band phase noise within the loop bandwidth of 25 kHz and -129 dBc/Hz out-of-band phase noise at 400-kHz offset frequency. The fractional spurious is less than -70 dBc/Hz at 300-kHz offset frequency and the reference spur is -75 dBc/Hz. The lock time is less than 150 /spl mu/s. The proposed synthesizer consumes 19.5 mA from a single 2.8-V supply voltage and meets the requirements of GSM/GPRS/WCDMA applications.     

A Balun-BPF Using a Dual Mode Ring Resonator

In this letter, a Balun-bandpass filter (BPF) is proposed by using a dual-mode ring resonator. The Balun-BPF is not a simply combined or integrated component of a BPF and a Balun but a single BPF with the balun function. We obtained the proper balanced outputs and two-pole BPF characteristic by symmetrically placing the output ports at lambda/2 distance from each other on the dual-mode ring resonator. The fabricated Balun-BPF has a bandwidth of 40 MHz and an insertion loss of 2.4 dB at a center frequency of 2.45 GHz. The differences between the two outputs are 180-184deg in phase and within 1dB in magnitude. The measured frequency responses agree well with simulated ones.     

A 3 Gb/s transmitter with a tapless pre-emphasis CML output driver

A 3 Gb/s wireline transmitter (Tx) with a tapless pre-emphasis current-mode logic output driver is presented in this paper. The proposed output driver can support 2.5, 6 and 10 dB pre-emphasis without any additional current tap. It can reduce the current consumption of the output driver by 30 %. The 1.5 GHz phase-locked loop (PLL), multi-phase generator, and 26-to-1 serializer are utilized to serialize 26-bit parallel data to 1-bit 3 Gb/s serial data stream. The rms and peak-to-peak jitters of PLL are 2.97 and 22.5 ps, respectively. The eye opening of the proposed output driver at 3 Gb/s is 0.8UI with a 10 dB loss channel. The current consumption of the output driver is only 5.14 mA, and the Tx is 9 mA. The area of the Tx is 0.72 mm² using the 0.11 μm CMOS process.     

An X-band high-efficiency MMIC power amplifier with 20-dBreturn losses

Describes the design principles and measured performance of an X-band high-efficiency monolithic-microwave-integrated-circuit (MMIC) power amplifier and discuss pertinent factors of the ion-implantation process. Also presented is a worst-case power prediction of the chip performance and a large-signal design using small-signal simulation. This balanced amplifier is fully monolithic with input and output return losses of better than 20 dB provided by Lange couplers. These return losses make it very convenient to cascade with other components. For high-efficiency operation, the drain voltage is 6 V. Across the 40% bandwidth from 8 to 12 GHz, the amplifier produces 1.6 to 2.1 W of output power at 33 to 40% power-added efficiency. For high-power operation, the drain voltage is 8.5 V. The amplifier can produce 2.4 to 2.8 W of output power at 26 to 29% power-added efficiency across the same 40% bandwidth     

Compact Circularly Polarized Antenna with a Capacitive Feed for GPS/GLONASS Applications

This letter presents a novel compact circularly polarized patch antenna for Global Positioning System/Global Navigation Satellite System (GPS/GLONASS) applications. The proposed antenna is composed of a simple square radiating patch fed by a capacitive dual‐feeder to increase the impedance bandwidth and a lumped element hybrid coupler to achieve the broadband characteristic of the axial ratio (AR). The realized antenna dimensions are 28 mm × 28 mm × 4 mm, which is the most compact size among the dual‐band GPS/GLONASS antennas reported to date. The measured results demonstrate that the proposed antenna has a gain of 2.5 dBi to 4.2 dBi and an AR of 0.41 dB to 1.51 dB over the GPS/GLONASS L1 band (1.575 GHz to 1.61 GHz).