Impact of growth rate on the quality of ZNS-MQW InGaAsP/InP laser structures grown by LP-MOVPE

We investigated the influence of the growth rate on the quality of zero-net-strained InGaAsP/InGaAsP/InP multiquantum well structures for 1.55 μm emission grown by low pressure metalorganic vapor phase epitaxy. The samples consisted of fixed compressive strained wells (ɛ=+1%) and tensile strained barriers (ɛ=−0.5%) grown with different quaternary bandgap wavelengths (λ_B=1.1–1.4 μm). Using higher growth rates, we obtained for the first time high quality zero net strained multi quantum well structures, regardless having constant group V composition in the well and barriers. The samples were analyzed by x-ray diffraction, photoluminescence and atomic force microscopy techniques. The amplitude of surface modulation roughness along [011] direction decreased from 20 nm to 0.53 nm with increasing growth rate and/or quaternary compositions grown outside the miscibility gap. A new deep PL broad emission band strongly correlated with the onset of wavy layer growth is also reported. Broad area and ridge waveguide lasers with 10 wells exhibited low losses (34 cm⁻¹) and low threshold current densities at infinite cavity length (1020 A·cm⁻² and 1190 A·cm⁻², respectively).     

Gender differences in research productivity: A bibliometric analysis of the Italian academic system

The literature dedicated to the analysis of the difference in research productivity between the sexes tends to agree in indicating better performance for men. Through bibliometric examination of the entire population of research personnel working in the scientific-technological disciplines of Italian university system, this study confirms the presence of significant differences in productivity between men and women. The differences are, however, smaller than reported in a large part of the literature, confirming an ongoing tendency towards decline, and are also seen as more noticeable for quantitative performance indicators than other indicators. The gap between the sexes shows significant sectorial differences. In spite of the generally better performance of men, there are scientific sectors in which the performance of women does not prove to be inferior.     

Hydraulic characterization of the full scale divertor cassette prototype

In the frame of the activities related to ITER divertor R&D, ENEA C.R. Brasimone was in charge by Fusion For Energy (F4E) to perform the assembly, the hydraulic tests and the theoretical simulation of the hydraulic behavior of the full scale divertor cassette prototype. The objective of these activities was aimed at the investigation of the thermal-hydraulic behavior of the full-scale divertor cassette both under steady state condition and during draining and drying operational transient. In particular, the steady state tests were focused on finally check whether the hydraulic design of the divertor components is able to ensure a uniform and proper cooling for the plasma facing components, with an acceptable pressure drop; whilst the transient ones were aimed at defining proper procedures for draining and drying the divertor cassette as well as for refilling it with water.This paper presents the results of the steady state and transient hydraulic experimental test campaigns performed at ENEA C.R. Brasimone as well as the relevant numerical analysis performed at the Department of Nuclear Engineering of the University of Palermo adopting the RELAP5 Mod3.3 thermal-hydraulic system code.     

Tool-supported requirements prioritization: Comparing the AHP and CBRank methods

Requirements prioritization aims at identifying the most important requirements for a software system, a crucial step when planning for system releases and deciding which requirements to implement in each release. Several prioritization methods and supporting tools have been proposed so far. How to evaluate their properties, with the aim of supporting the selection of the most appropriate method for a specific project, is considered a relevant question.In this paper, we present an empirical study aiming at evaluating two state-of-the art tool-supported requirements prioritization methods, AHP and CBRank. We focus on three measures: the ease of use, the time-consumption and the accuracy. The experiment has been conducted with 23 experienced subjects on a set of 20 requirements from a real project. Results indicate that for the first two characteristics CBRank overcomes AHP, while for the accuracy AHP performs better than CBRank, even if the resulting ranks from the two methods are very similar. The majority of the users found CBRank the “overall best” method.     

Heat rejection pressure optimization for a carbon dioxide split system: An experimental study

Recent studies indicate carbon dioxide (R744) as a valid alternative to classical substances such as HFCs used in vapour compression plants. However a transcritical refrigeration cycle is needed because the critical temperature of carbon dioxide is usually near the ambient temperature. Consequently the carbon dioxide refrigerator performances are significantly influenced by the heat rejection pressure. In this paper an experimental investigation on working optimization for a “split-system” to cool air in residential applications is presented: by varying the heat rejection pressure an optimum working condition has been found at different ambient temperatures. Furthermore a simplified model to predict the optimum heat rejection pressure is shown and a comparison with experimental results is carried out. Both the model validation and the experimental results suggest that the heat rejection pressure optimization is an convenient method to improve the performance of a carbon dioxide split system. Finally an algorithm based on the aforementioned model has been proposed in order to control an electronic back pressure valve by means of a PLC.     

Experimental design of the kinetic resolution of a key precursor of high‐value bioactive myo‐inositols by an immobilized lipase

BACKGROUND: The response surface methodology was successfully applied to the optimization of the reaction variables for the kinetic resolution of a precursor of high‐value myo‐inositols, ( ± )‐1,2‐O‐isopropylidene‐3,6‐di‐O‐benzyl‐myo‐inositol (( ± )‐1), by Novozym 435. The resolutions were run separately, with two acylating agents, ethyl acetate and vinyl acetate, in a solvent‐free system. The variables analyzed were reaction temperature, substrate concentration, water concentration and enzyme activity. A statistical model was employed for the evaluation of the influence of the variables on conversion and enantiomeric excess (ee). RESULTS: The optimal conditions for this resolution using vinyl acetate as acylating agent were 45 °C, 5 mg mL^?1 of substrate, 71 U of enzyme activity and 0%w/w of water concentration. The high conversion (49.2 %) and ee (>99%) reached in the chemoenzymatic synthesis of acylated product, L‐(?)‐5‐O‐Acetyl‐3,6‐di‐O‐benzyl‐1,2‐O‐isopropylidene‐myo‐inositol, secure the efficient synthesis of the D enantiomorph present in the original racemic mixture (( ± )‐1) as well. CONCLUSIONS: The use of the experimental design strategy was productive, leading to a 14‐fold increase in the productivity of the reaction compared with the non‐optimized conditions. Both derivative L‐(?)‐2 and remaining substrate D‐(+)‐1 were obtained at high ee. © 2012 Society of Chemical Industry     

Modeling multi-rate DSP specification semantics for formal transformational design in HOL

The CATHEDRAL Silicon Compilers synthesize hardware for DSP algorithms specified in Silage, a high level applicative language. In order to optimize the results of the silicon compilation in terms of chip-area and/or throughput, the user often massages the specification applying transformations to the Silage code. To guarantee that the transformations preserve the behavior of the specified algorithm, the formal semantics of the specification language had to be defined. The semantics has been used to prove in HOL the correctness of the transformations and to prove properties of the specification. We are currently building a system where a menu of useful andcorrectness preserving transformations will be available to the user. In this system the user could choose appropriate transformations from the menu taking advantage of his creativity and expertise to interactively guide the silicon compiler, without the risk of introducing inconsistencies. This article describes the formalmulti-rate semantics of a substantial subset of Silage and illustrates some formally verified transformations.     

Proteolysates from slaughter-house blood

Previous studies have shown the anticlotting effect of papain on slaughter-house blood to be due to its proteolytic activity on fibrin. This has suggested its possible use in a protein recovery process. Blood proteolysate has been obtained using microbial proteases or papain; the haemolysis of the cells was then effected and the haem extracted with acidified acetone to decolourise the product.     

A Formal Model for Video Shot Segmentation and its Application via Animate Vision

The first step in a video indexing process is the segmentation of videos into meaningful parts called shots. In this paper we present a formal model of the video shot segmentation process. Starting from a mathematical characterization of the most common transition effects, a video segmentation algorithm capable to detect both abrupt and gradual transitions is proposed. The proposed algorithm is based on the computation of an arbitrary similarity measure between consecutive frames of a video. The algorithm has been tested adopting a similarity metric based on the Animate Vision theory and results have been reported.