Experimental investigation of water droplet–air flow interaction in a non-reacting PEM fuel cell channel

It has been well documented that water production in PEM fuel cells occurs in discrete locations, resulting in the formation and growth of discrete droplets on the gas diffusion layer (GDL) surface within the gas flow channels (GFCs). This research uses a simulated fuel cell GFC with three transparent walls in conjunction with a high speed fluorescence photometry system to capture videos of dynamically deforming droplets. Such videos clearly show that the droplets undergo oscillatory deformation patterns. Although many authors have previously investigated the air flow induced droplet detachment, none of them have studied these oscillatory modes. The novelty of this work is to process and analyze the recorded videos to gather information on the droplets induced oscillation. Plots are formulated to indicate the dominant horizontal and vertical deformation frequency components over the range of sizes of droplets from formation to detachment. The system is also used to characterize droplet detachment size at a variety of channel air velocities. A simplified model to explain the droplet oscillation mechanism is provided as well.     

On the Linear Structure of Betting Criterion and the Checking of Coherence

We use imprecise probabilities, based on a concept of generalized coherence, for the management of uncertainty in artificial intelligence. With the aim of reducing the computational difficulties, in the checking of generalized coherence we propose a method which exploits, in the framework of the betting criterion, suitable subsets of the sets of values of the random gains. We give an algorithm in each step of which a linear system with a reduced number of unknowns can be used. Our method improves a procedure already existing in literature and could be integrated with recent approaches of other authors, who exploit suitable logical conditions with the aim of splitting the problem into subproblems. We remark that our approach could be also used in combination with efficient methods like column generation techniques. Finally, to illustrate our method, we give some examples.     

Relative quantification of <Emphasis Type="Italic">Vitis vinifera</Emphasis> L. varieties in musts by microsatellite DNA analysis

Varietal wines are defined as made primarily from a single variety of grape, which is identified on the label. However the inclusion of other varieties in their production is permitted under defined percentages. The fact that different grape varieties/varietal wines present far different economical values can attract fraudulent practices. Thus the development of methods, which allow the quantification of those varieties, is of crucial importance. The first approach to the method for the relative quantification of must containing two varieties based on microsatellite DNA analysis is presented. Quantification was achieved by densitometry measurements of the amplification products of the pooled varieties, obtained with loci VVMD6 and VVMD7, after their separation and staining on polyacrilamide gels. We have found that a good correlation between the proportion of each variety in must and the signal intensity of the alleles are dependent on the variety (varietal effect) and the microsatellite locus used. The relative quantification of musts can be accomplished by the presented method depending on the presence of overlapping alleles, and the composition of the varieties and their relative amounts.     

Diffusion bonding of SU 263

Using a specially constructed apparatus, diffusion bonding of SU 263 alloy was studied in the temperature range of 1123–1323 K and compressive stress of 90% of its yield strength at the corresponding temperatures to determine the relative importance of the process parameters, the mechanism(s) responsible for bonding and the joint characteristics. Bond quality was assessed by optical metallography and lap shear testing. The mechanism of bonding was evaluated by grain growth equation. The experimental results were compared with a model developed by Pilling [Pilling, J., 1988. The kinetics of isostatic diffusion bonding in superplastic materials. Mater. Sci. Eng. 100, 137–144] in which the void closure by creep flow and diffusion are considered. Quantified EPMA line scan analysis was carried out to confirm the bonding mechanism and to determine the composition at the interface.     

Study of the luminescent properties of KMgF3:Sm

The photoluminescence (PL), radioluminescence (RL) and thermoluminescence (TL) of KMgF₃ doped at several Sm concentrations have been investigated. The maximum TL and RL yield under beta irradiation has been observed in KMgF₃:Sm 0.02 mol%. The glow curve of this doped perovskite is made up of at least five peaks located at 95, 120, 160, 270, and 330 °C. The third peak appears to be the most convenient for personal or environmental dosimetry, since it shows no fading and good linearity within the investigated dose range (0.020-200 Gy). From the RL and PL spectra it has been found that most of KMgF₃:Sm emission is located at wavelengths higher than 650 nm. This emission, which is characteristic of Sm²⁺, makes this doped compound attractive for fiber-optic dosimetry.     

Estimation of rheological properties of gelato by FT-NIR spectroscopy

The control of gelato powder mixture production usually is carried out evaluating the gelato liquid phase. The rheological measurements from the present study were conduced on gelato unfrozen liquid phase in order to indirectly evaluate its rheological properties by FT-NIR spectroscopy applied on gelato powders. The calibration set was composed by samples obtained from different recipes having increasing percentage of thickeners, maintaining the proportions of the others compounds constant. After the NIR acquisitions the powders were mixed with warm milk, blended and than settled in order to obtain the unfrozen liquid phase needed for the rheological measurements. For each of the 60 tested recipes three batches with the same thickeners concentration were prepared. The flow curves were obtained with a rotational viscosimeter and were evaluated by using the Ostwald de Waele’s equation and the goodness of fit was evaluated by the R², which was above 0.95. Predictive models of rheological parameters were set up by means of PLS regressions in order to predict the apparent viscosity (η), the consistency coefficient (K) and the flow behaviour index (n) from spectral acquisitions. A high correlation of calibration was found between NIR spectra and apparent viscosity with R² of 0.943. A good correlation was also found between the NIR spectra and the consistency coefficient (K) and flow behaviour index (n), with a determination coefficient (R²) of 0.895 and 0.874, respectively.The good prediction of the models encourages applying them to reduce significantly the time of the powder mixing control during production.     

An optical study of alumina films thermal evolution upon ammonia annealing

The physical and structural evolution of alumina films deposited by ALCVD annealed at high temperatures in N₂ has been studied.Low temperature post deposition treatments in NH₃ (PDN) have been performed to evaluate the impact of nitrogen incorporation in the alumina film on its thermal stability. Thermal evolution has been studied by deep UV spectroscopic ellipsometry and grazing X-ray reflectance techniques. AFM measurements were also performed to confirm and complete the ellipsometric and GXR analysis.The change of the crystalline structure was detected by ellipsometry by the different UV refractive index, while the GXR provided a unique thickness evaluation.It was therefore possible to determine the layer densification after the thermal treatment and the impact of the PDN on the transition temperature.     

Photocatalytic oxidation of aliphatic and aromatic sulfides in the presence of silica adsorbed or zeolite-encapsulated 2,4,6-triphenyl(thia)pyrylium

Solid photocatalysts in which the 2,4,6-triphenylpyrylium (TP) or 2,4,6-triphenylthiapyrylium cation (TTP) are encapsulated within zeolite Y or deposited on mesoporous silica are used as photosensitizers for the oxidation of sulfides, both aromatic and aliphatic, in solvents of various polarity. Contrary to the same cations in solution, these solid sensitizers are not significantly degraded during operation. An effective oxygenation takes place leading to sulfoxides, disulfides, sulfinic and sulfenic esters as well as sulfonic acids. This large scope method shows a limited dependence on the substrate structure and on conditions and is suitable for the abatement of sulfur-containing pollutants.