Cold sintering of diatomaceous earth

Diatomite, a natural silicate-based sedimentary rock, was densified by cold sintering at room temperature and 150°C under various pressures (100, 200, and 300 MPa) and using different NaOH water solutions (0–3 M). The relative density of cold sintered diatomite can be as high as 90%, a condition that can be achieved by conventional firing only at 1200–1300°C. The cold sintered materials maintain the same mineralogical composition of the starting powder (quartz, glass, and illite) and are constituted by well-deformed and flattened grains oriented orthogonally to the applied pressure. Conversely, an evident phase evolution takes place upon conventional firing with the formation of cristobalite and mullite. The bending strength of cold sintered artifacts can exceed 40 MPa and increases to ≈80 MPa after post-annealing at 800°C, such mechanical strength is much larger than that of conventionally pressed samples sintered at 800°C, which is only ≈1 MPa.     

Terahertz time domain spectroscopy of graphene and MXene polymer composites

The rising demand for faster and more efficient electronic devices forces electronics industry to shift toward terahertz frequencies. Therefore there is a growing need for efficient, lightweight, and easy to produce absorbing materials in the terahertz range for electromagnetic interference (EMI) shielding and related applications. This study presents a study on basic optical properties of two types polymer-based composites loaded with two-dimensional structures—graphene and MXene phases (Ti₂C). In said range, total EMI shielding efficiency (SE) and its components, the absorption coefficient (α ), refractive index, and complex dielectric function are investigated. The ratio of SE absorption component to reflection component (SE_ABS :SE_R ) of fabricated composites is equal or higher than 30:1 in over 80% of studied range. The fabricated composites exhibit low (<0.1) loss tangent in studied range. The addition of 1 wt% of graphene increases the composite α over 10-fold in respect to pure polymer–up to 60 cm⁻¹ for frequency higher than 2 THz.     

CR composites with improved processing safety crosslinked via Heck's reaction

The aim of this study was to optimize the composition of the chloroprene rubber (CR) composites crosslinked via the Heck-type reaction to ensure their safe processing at elevated temperature. The developed curing system consisting of iron (III) acetylacetonate (Fe(acac)) and triethanolamine (TEOA) demonstrates high activity and more eco-friendly composition in comparison with metal oxide system, commercially used for CR crosslinking. However, the high activity of Fe(acac)/TEOA system results in a short scorch time, which is the greatest disadvantage regarding the safe processing of CR rubber and thus, must be improved. Therefore, CR compounds with Fe(acac) in the presence of different additives were studied. The longest scorch times (t₀₂) were observed for rubber compounds with urotropine (U), N-cyclohexyl-2-benzothiazole sulfenamide (CBS) or salicylic acid. Moreover, vulcanizates containing these additives exhibited higher tensile strengths and elongation at breaks compared to CR crosslinked with Fe(acac)/TEOA system.     

Rheological,thermal and morphological properties of polyethylene terephthalate/polyamide 6/rice husk ash composites

This work deals with the rheological, morphological, and thermal properties of composites having poly(ethylene terephthalate) (PET), polyamide-6 (PA6), and their blends as matrices, and rice husk ash (RHA) as a filler. The study determines the effect of composition on the change in viscosity and rate of degradation during processing in a torque rheometer. Our data indicates that thermal stability and degradation during processing depend on matrix composition and filler concentration. SEM micrographs show both partial adhesion of the filler to the matrices and filler pullout. Optical microscopy shows particle agglomeration and that agglomerate size increased with filler content. FTIR investigates the shifting of absorption bands of PET/PA6 composite after the addition of RHA and attributes the selective dispersion of RHA to the formation of hydrogen bonds. Our data supports the idea that filler employed here is an option to develop polymer composites with improved properties.     

Empathy and Modern Technology: A Neuroergonomics Perspective

The primary purpose of this paper is to discuss the role of empathy in the design of advanced systems in manufacturing and service industries in order to ensure suitable working conditions for employees from the social and technological point of view. The origins and components of empathy are briefly reviewed. The neural underpinnings of three components of empathy, including cognitive, emotional, and behavioral aspects, are considered in the context of human–human and human–machine interactions, as well as design of working environments. Finally, the potential advantages of applying empathy‐related knowledge to the design and development of human‐centered technology are discussed.     

Knowledge base support for dynamic information system management

Enterprise activities are governed by regulations and laws that are multiple, heterogeneous and not always easy to understand. The arising and/or the modification of these regulations and laws can cause a significant impact in the business context, especially in terms of enterprise information systems adaptation. Currently, there are many methodological and technological tools that facilitate the application of regulations and procedures, but they are not integrated enough to ensure a complete problem management. Therefore, they are not sufficient to support organizations and companies in the management of their business processes. In this paper we propose a methodological and technological solution, able to model, manage, execute and monitor business processes of complex domains. The system allows both the design of an information system and its prototyping as a web application, by the extension of an appropriately selected Business Process Management suite. During both the design and the usage phases of the prototyped information system, it is possible to interface with a knowledge base that contains information about regulations and aspects that characterize the enterprise (organizational chart, tasks, etc.).     

The contribution of proteomics towards deciphering the enigma of Coxiella burnetii

Coxiella burnetii, the causative agent of Q fever, is an intracellular bacterium and a potential weapon for bioterrorism. The widespread throughout the world, zoonosis is manifested clinically as a self-limited febrile illness, as pneumonia (acute Q fever) or as a chronic illness with endocarditis being its major complication. The recent Netherlands Q fever outbreak has driven the bacterium from a relatively cryptic, underappreciated, “niche” microorganism on the sideline of bacteriology, to one of possibly great impact on public health. Advances in the study of this microorganism proceeded slowly, primarily due to the, until recently, obligatory intracellular nature of the pathogen that in its virulent phase I must be manipulated under biosafety level-3 conditions. Proteomic studies, in particular, have generated a vast amount of information concerning several aspects of the bacterium such as virulence factors, detection/diagnostic and immunogenic biomarkers, inter-/intraspecies variation, resistance to antibiotics, and secreted effector proteins with significant clinical impact. The phenomenon observed following the genomics era, that of generation and accumulation of huge amount of data that ultimately end up unexploited on several databases, begins to emerge in the proteomics field as well. This review will focus on the advances in the field of C. burnetii proteomics through MS, attempting in parallel to utilize some of the proteomics findings by suggesting future directions for the improvement of Q fever diagnosis and therapy.     

Electrostatic force microscopy of self-assembled peptide structures

In this report electrostatic force microscopy (EFM) is used to study different peptide self-assembled structures such as tubes and particles. It is shown that not only geometrical information can be obtained using EFM, but also information about the composition of different structures. In particular we use EFM to investigate the structures of diphenylalanine peptide tubes, particles, and CSGAITIG peptide particles placed on pre-fabricated SiO(2) surfaces with a backgate. We show that the cavity in the peptide tubes could be due to the presence of water residues. Additionally we show that self-assembled amyloid peptides form spherical solid structures containing the same self-assembled peptide in its interior. In both cases transmission electron microscopy is used to verify these structures. Further, the limitations of the EFM technique are discussed, especially when the observed structures become small compared with the radius of the AFM tip used. Finally, an agreement between the detected signal and the structure of the hollow peptide tubes is demonstrated.     

A Comparative Study of Two Wayfinding Aids With Simulated Driving Tasks—GPS and a Dual-Scale Exploration Aid

Global Positioning System (GPS) is currently the most often used wayfinding aid for driving. Yet GPS is originally designed to provide a driving guide rather than to help users gain spatial knowledge. Accordingly, GPS might be less usable in situations where spatial knowledge is required. This study experimentally compared two wayfinding aids using simulated driving tasks in a virtual environment: a simulated GPS and a dual-scale exploration aid (DSEA). The DSEA, which provides two levels of details—both detailed and contextual information—was proposed to support participants in finding and selecting routes by themselves. The results show that although DSEA was less helpful in leading participants to their destination and corresponded to more turning errors in simulated driving, it was more useful for the corresponding participants to establish spatial awareness and a cognitive map. The influence of participants' spatial ability test score on wayfinding performance was measured and discussed. The proposed DSEA design and experimental results show some indications for designing new wayfinding aids aimed at reducing wayfinding errors and constructing cognitive maps while still providing easy navigation.