Towards real CAD

Present-day computer-aided design (CAD) packages play only a small part in the area of mechanical engineering design, which involves the synthesis and embodiment of physical components to perform a pre-determined function without unwanted side effects. The computer cannot properly help the designer in this task until it is able to capture and process the function requirements of the design. This paper describes the computer system being developed for this purpose at the Engineering Design Centre at Cambridge University Engineering Department. The paper also explores some of the geometrical and programming implications raised.     

Greater task difficulty amplifies the facilitatory effect of des-glycinamide arginine vasopressin on appetitively motivated learning.

39 3–6 mo old male Long-Evans rats were trained in a discrete-trial forward autoshaping paradigm to touch an extended lever to earn food pellets. Reinforcement was delivered either simultaneously with or 6 sec after lever retraction, which occurred either noncontingently after 15 sec or when the Ss touched the lever. Treatment with subcutaneous des-glycinamide arginine vasopressin (DGAVP [15 μg/kg]) 1 hr before sessions increased the rate of acquisition of the extended-lever-touch response and also facilitated development of intertrial (adjunctive) nose poking. The effects of the peptide were more robust in the more difficult delayed reinforcement task. Results are consistent with previous findings that DGAVP lacks the classical peripheral activity of vasopressin. In both experiments, peptide treatment was terminated before asymptotic levels of performance were attained; the continued facilitation of acquisition in treated groups suggests a specific enhancement of learning and/or enhanced memory retrieval. (22 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Hydrocarbon exploration risk evaluation through uncertainty and sensitivity analyses techniques

The evaluation of the exploration risk in the oil industry is a fundamental component of the decision process related to the exploratory phase. In this paper the two basic components of the exploratory risk: trap geometry and trapped hydrocarbon quantities (fluid), are compounded in a single coherent uncertainty and sensitivity approach. The results clarify that the model geometry influences each Petroleum System Modeling step and that the geometric uncertainty is correlated with the fluid uncertainty. The geometric uncertainty evaluation makes use of geostatistical techniques that produce a number of possible realizations of the trap geometry, all compatible with available data. The evaluation of the fluid uncertainty, through a Monte Carlo methodology, allows us to compute the possible quantities of oil and gas, generated in a basin and migrated from the hydrocarbon source location to each single trap. The final result is the probability distribution of oil and gas for each trap in the basin, together with other useful indicators like: the hydrocarbon filling probability map, the closure probability map, the drainage area probability map, the spilling paths probabilities, the trap-filling scenarios.     

Healing substrates with mobile, particle-filled microcapsules: designing a 'repair and go' system.

We model the rolling motion of a fluid-driven, particle-filled microcapsule along a heterogeneous, adhesive substrate to determine how the release of the encapsulated nanoparticles can be harnessed to repair damage on the underlying surface. We integrate the lattice Boltzmann model for hydrodynamics and the lattice spring model for the micromechanics of elastic solids to capture the interactions between the elastic shell of the microcapsule and the surrounding fluids. A Brownian dynamics model is used to simulate the release of nanoparticles from the capsule and their diffusion into the surrounding solution. We focus on a substrate that contains a damaged region (e.g. a crack or eroded surface coating), which prevents the otherwise mobile capsule from rolling along the surface. We isolate conditions where nanoparticles released from the arrested capsule can repair the damage and thereby enable the capsules to again move along the substrate. Through these studies, we establish guidelines for designing particle-filled microcapsules that perform a 'repair and go' function and thus, can be utilized to repair damage in microchannels and microfluidic devices.     

The flame retardant mechanism of polyolefins modified with chalk and silicone elastomer

This paper presents the current understanding of the flame retardant mechanism of Casico?. The study includes the flame retardant effect of each individual component: ethylene–acrylate copolymer, chalk and silicone elastomer, as well as the formation of an intumescent structure during heating. The flame retardant properties were investigated by cone calorimetry and oxygen index tests. To obtain insight into the flame retardant mechanism, heat treatment under different conditions has also been performed. The results indicate that the flame retardant mechanism of Casico is complex and is related to a number of reactions, e.g. ester pyrolysis of acrylate groups, formation of carbon dioxide by reaction between carboxylic acid and chalk, ionomer formation and formation of an intumescent structure stabilized by a protecting char. Special emphasis is given to the formation of the intumescent structure and its molecular structure as evaluated from ¹³C MAS‐NMR and ²⁹Si MAS‐NMR, ESCA and XRD analysis. After treatment at 500°C the intumescent structure consists mainly of silicon oxides and calcium carbonate and after treatment at 1000°C the intumescent structure consists of calcium silicate, calcium oxide and calcium hydroxide. Copyright © 2003 John Wiley & Sons, Ltd.     

The electropolymerization of pyrrole at a CuNi electrode: corrosion protection properties

Pyrrole was successfully electropolymerized at a copper–nickel electrode in a near-neutral sodium oxalate solution containing Cu²⁺ cations to generate a homogenous and adherent polypyrrole film. The presence of the Cu²⁺ ions increased both the rate of the electropolymerization reaction and the adherence of the polymer at the CuNi interface. In the absence of these cations, oxidation of the electrode occurred generating a nickel-rich layer that was not sufficiently conducting, under the electropolymerization conditions employed, to facilitate the electron-transfer reaction and the electropolymerization of pyrrole.These films remained stable and exhibited significant corrosion protection properties in acidified and neutral 0.1 mol dm⁻³ NaCl solutions even on polarization of the electrodes to high anodic potentials.     

Contribution of listeners' approaching motion to auditory distance perception.

Of the several sources of acoustic information for distance perception, those arising from motion of the listener or sound source have received little attention. This motion-related information (recently called acoustic tau) is described, and experiments evaluating its utilization are presented. Accuracy and consistency at walking to the locations of briefly presented sounds were better when people listened while walking than while standing still. Manipulations of the sound to simulate shorter or longer target distances produced appropriate undershooting but not overshooting. The results indicate that people use motion-related acoustic information about distance to guide their locomotor actions, although they do not take full advantage of this information. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

UPGRADING OF SUGAR CANE BAGASSE BY THERMAL PROCESSES. 4. COAL CO-PROCESSING USING SUGAR CANE BAGASSE OIL AS SOLVENT

In the present work, coal co-processing with sugar cane bagasse oil was studied for the first time. Sugar cane bagasse was chosen due to its great offer, since it is a residue in the process of a large project named PROALCOOL aiming the producing ethanolfrom sugarcane. In addition, the liquefaction of sugar cane bagasse with monoethanolamine was already developed in our laboratory showing good results. Four coal samples were studied. The yields of the total conversion and the oil productions were obtained in order to evaluate the efficiency of the liquefaction process studied.