贴片机脱机编程的快捷方法

SMT生产线中的大多数加工设备均为数控设备。它们编程所需要的大多数特征数据均可从CAD设计系统中得到。文章介绍了如何从CAD设计系统中导出X、Y坐标数据,并转换成贴片数据的方法和思路,以期引起更多的同行加入到这方面的研究中。     

工作流技术及其应用研究

文章介绍了工作流技术及其发展历史,对工作流的系统模型进行了详细分析,探讨了工作流技术在企业管理信息系统中的实际应用。     

基于"层"模式的双机容错系统

容错技术广泛应用于各个行业来保证系统的冗余和可靠性。文章在分析比较当前的双机容错系统的性能优缺点后,提出了一种全新的基于“层”模式的双机容错系统解决方案。按照这种模式,可以从链路层到应用层构建一个通用的系统级的双机容错系统。文章对其实现的关键技术进行了阐述。     

基于混合智能的多Agent个性化信息推荐

在基于Agent的个性化网页推荐中，目前主要有两种过滤方法：基于内容的过滤和基于多Agent合作的过滤。在分析了单独使用这两种方法存在的不足之后，提出了基于改进蚁群算法的聚类分析建立用户模型的算法，并给出了结合两种方法优点的用户模型主动学习算法，最后给出了个性化信息推荐模型及相关算法。     

Iterative detection/decoding for two-track partial response channels

In this letter, we investigate the iterative detection/decoding algorithms for two-track partial response channels. We first describe the iterative algorithm as an iterative message-passing/processing algorithm over a high-level normal graph and then propose two trellis-based detection algorithms. The natural one is based on a joint trellis, which can be implemented for low-order channels. For moderate-order channels, we propose a separated detection, which is based on two single-track trellises. Compared with the joint detection, the separated detection is simpler in most cases. Simulation results show that, for two-track EPR4 channels with minor intertrack interferences, the separated detection causes only marginal degradation in performance.     

新型的芯片间互连用CMOS/BiCMOS驱动器

从改善不同类型 IC芯片之间的电平匹配和驱动能力出发 ,设计了几例芯片间接口 (互连 )用 CMOS/Bi CMOS驱动电路 ,并提出了采用 0 .5 μm Bi CMOS工艺 ,制备所设计驱动器的技术要点和元器件参数。实验结果表明所设计驱动器既具有双极型电路快速、大电流驱动能力的特点 ,又具备 CMOS电路低压、低功耗的长处 ,因而它们特别适用于低电源电压、低功耗高速数字通信电路和信息处理系统。     

西北低煤阶盆地生物成因煤层气成藏模拟研究

在美国粉河、澳大利亚苏拉特等低煤阶盆地煤层气勘探取得突破以前,一直认为具有商业价值的煤层气资源主要存在于中煤阶的煤层中,煤阶太低,一般含气量不高,不具有勘探价值。但是近几年来的发现证实,低煤阶盆地煤层厚度大,渗透率高,资源丰度大,含气饱和度高,同样可获得商业性气流,而且从其气体的成因来看,其中有很大一部分是生物成因的煤层气。利用煤层气成藏模拟装置对低煤阶含煤盆地的煤岩样品开展成藏模拟,从实验角度证明了中国西北地区虽然煤层煤阶较低,热成因气较少,但是却存在着具有商业价值的二次生物成因的甲烷气,再加上含煤层系众多,煤层厚度大,资源丰度极高,仍具有巨大的勘探潜力。      

Comments on "An efficient PML implementation for the ADI-FDTD method"

For original paper see Wang and Teixeira (IEEE Microwave Wireless Comp. Lett., vol.13, p.72-4, 2003 February). In this paper, a more precise way to evaluate the actual performance of the perfectly matched layer (PML) used for the alternating direction implicit finite-difference time-domain (ADI-FDTD) method is presented. It is shown that the intrinsic numerical dispersion error of the ADI-FDTD method must be taken into account when the actual performance of the ADI-PML (as well as the ADI-FDTD method) is evaluated. Most importantly, it is demonstrated that the ADI-PMLs implemented with either the traditional manner or the way proposed in have almost the same level of accuracy when the performance of the ADI-PML is correctly evaluated.     

Magnetic Properties of Fe-Doped Rutile

Ball-milling method was applied to dissolve Fe into titanium dioxide (TiO₂). X-ray diffraction indicated the starting anatase changed to a rutile-type structure with oxygen deficiency after ball milling. Transmission electron microscopy and X-ray absorption experiments were conducted to examine the possible existence of magnetic impurities in the ball-milled powders after they were leached in HCl solutions. Temperature dependence of the resistivity shows semiconducting behavior and the magnetic hysteresis loops at 5 and 300 K exhibit ferromagnetic characteristics. Fe-doped TiO₂ films were also prepared by pulsed laser deposition. The magnetic properties of the films are discussed.     

M16C/62P在液晶电视制造中的应用

本文介绍M16C平台在先进的数字液晶电视技术以及硬件配置和软件算法方面的作用，同时也将讨论其他的LSI。此外，也为电视制造商用于26英寸或以上液晶电视提供主要解决方案。