Efficient Computation of EXIT Functions for Nonbinary Iterative Decoding

The calculation of nonbinary extrinsic information transfer charts for the iterative decoding of concatenated index-based codes is addressed. We show that the extrinsic information at the output of a constituent a posteriori probability decoder can be calculated with very low complexity, where expensive histogram measurements are not required any more. An example for turbo trellis-coded modulation demonstrates the capabilities of the proposed approach     

The slot-coupled hemispherical dielectric resonator antenna with a parasitic patch: applications to the circularly polarized antenna and wide-band antenna

The aperture-coupled hemispherical dielectric resonator antenna (DRA) with a parasitic patch is studied rigorously. Using the Green's function approach, integral equations for the unknown patch and slot currents are formulated and solved using the method of moments. The theory is utilized to design a circularly polarized (CP) DRA and a wide-band linearly polarized (LP) DRA. In the former, the CP frequency and axial ratio (AR) can easily be controlled by the patch location and patch size, respectively, with the impedance matched by varying the slot length and microstrip stub length. It is important that the AR will not be affected when the input impedance is tuned, and the CP design is therefore greatly facilitated. For the wide-band LP antenna, a maximum bandwidth of 22% can be obtained, which is much wider than the previous bandwidth of 7.5% with no parasitic patches. Finally, the frequency-tuning characteristics of the proposed antenna are discussed. Since the parasitic patch can be applied to any DRAs, the method will find applications in practical DRA designs.     

A kinetic study on isothermal crystallization of palm oil by solid fat content measurements

Isothermal crystallization of plam oil was studied by means of differential scanning calorimetry (DSC) as well as by nuclear magnetic resonance spectrometry to monitor its solid fat content (SFC). The temperature of crystallization (Tc) varied from 0 to 30°C, depending on the method used. The plot of %SFC vs. time at 25°C was sigmoidal in shape. However, at lower temperatures, two consecutive curves were clearly visible. Results from DSC experiments showed the following interesting features. At each Tc, the crystals produced were of different compositions. From 0 to 8°C, the thermogram showed three peaks, with the first two peaks (I and II) sharp, and the third (III) rather broad. At elevated temperatures up to 20°C, peak II disappeared totally while peak III tended to shift toward peak I. Above 20°C, both peaks shifted downward to longer times. Peak I continued to be broadened, and then suddenly disappeared at Tc above 24°C. The melting thermograms of the crystals obtained above and below this cut-off point were distinctly different. Kinetic studies on isothermal crystallization based on the data of SFC measurements showed that the data fit well into the Avrami-Erofeev equation with n=3 over the first 70% of the crystallization.     

Single-photon avalanche diode detectors for quantum key distribution

The application of quantum key distribution (QKD) has raised particular demands for single-photon detectors. One of the most promising candidates at the low-loss optical fibre communications windows is the planar geometry InGaAs/InP single-photon avalanche diode. These detectors have been modelled, fabricated and characterised at 1.55 mum wavelength. Their performance in terms of single-photon detection efficiency, dark count rate, timing jitter and afterpulsing behaviour are reported and compared with the best commercially available, linear multiplication avalanche photodiodes operated in Geiger-mode. Their use in the application of QKD is discussed.     

Scalar quantisation of LSF parameters using vector measurement

A new form of line spectral frequency (LSF), bounded line spectral frequency, is presented. It is shown that the new representation is more efficient than the direct line spectral frequency and the differential line spectral frequency (DLSF). By using a vector measure, the scalar quantisation of tenth-order linear predictive coding (LPC) parameters can be coded at 28 bit/frame with a transparent quantisation quality     

Variants of chromosome 9 in phenotypically normal individuals

The human chromosome 9 displays the highest degree of structural variability. Four different types of variants are described including pericentric inversion, extra G-positive band in the q arm, additional G-positive band in the p arm and duplication of band 9q21-q22. It is important to demonstrate inheritance from a phenotypically normal individual in order to differentiate between a variant chromosome and an abnormal chromosome.     

Improved strained HEMT characteristics using double-heterojunctionIn0.65Ga0.35As/In0.52Al0.48As design

The DC and microwave properties of strained In_0.65Ga _0.35As/In₀₅₂Al_0.48As HEMTs (high electron-mobility transistors) with double-heterojunction design are presented. The high sheet carrier density and good carrier confinement give rise to excellent device performance with very low output conductance. For 1×150-μm² long-gate HEMTs, the measured cutoff frequency f_T and maximum frequency of oscillation f_max are as high as 37 and 66 GHz, respectively     

Determination of alpha-particle track depths in CR-39 detector from their cross-sections and replica heights

A challenging task in the application of solid-state nuclear track detectors (SSNTDs) is the measurement of depths of the tracks. One approach involves breaking and polishing the side of SSNTDs to reveal the cross-sections of the tracks for direct measurements. Recently, surface profilometry was used to measure the heights of the replicas of alpha-particle tracks to give the track depths. In the present work, systematic comparisons among the track depths for alpha-particles with normal incidence and different incident energies were made for these two methods. After irradiation, the detectors were etched in a 6.25 N aqueous solution of NaOH at 70 °C. Both long etching time of 15 h (to produce spherical-phase tracks) and short etching time from 1 to 8 h (to produce sharp-phase tracks) were used. Good agreement was achieved between the two methods for spherical-phase tracks but not for sharp-phase tracks. It has been found that the surface profilometry method only works for replicas for spherical-phase tracks. Replicas for sharp-phase tracks are easier to collapse or deform, so the surface profilometry method may not give correct results.     

Optical appearance of alpha particle tracks in CR-39 SSNTD

A ray tracing method based on geometrical optics was used to study the tracks from alpha particles with different energies and with an incident angle of 50°. The transmission operation mode of the microscope is simulated. Considering the distribution of light intensities from the tracks, the mean and the 80% percentile gray levels from real experiments are proposed as quantitative variables to differentiate among tracks. The gray level properties for the same track for different exposures can vary to large extents. We introduce three variables, κ, λ and ε, to make empirical corrections. It is interesting to see that these coefficients are very consistent for the same alpha particle track despite the very different gray level properties. Gray level results have been obtained for tracks from alpha particles with 50° incident angle and different incident energies. However, the track depths cannot be predicted by any one of the coefficients κ, λ and ε. Multivariate analyses can help separate the tracks corresponding to different alpha energies. By using discriminant analysis with κ, λ and ε as independents, effectively all alpha energies can be determined with an accuracy of ±0.5 MeV.