Physical and mechanical characterization of phyllites and metagreywackes in central Portugal

This work defines the physical and mechanical characteristics of phyllites and metagreywackes belonging to a schist–greywacke complex in central Portugal. The index properties, point load strength, uniaxial compressive strength, slake durability and Schmidt rebound hardness were determined. In general, the metagreywackes gave a higher strength than phyllites with the same weathering degree. Possible correlations and estimation models were established and compared with the equations obtained by different researchers.     

NUMERICAL SOLUTIONS OF FLOWS IN ROCKET ENGINES WITH REGENERATIVE COOLING

A one-dimensional mathematical model is presented for flows in a rocket engine that has a regenerative cooling system. The problem involves the flow of a gas in a converging- diverging nozzle, the flow of a coolant in channels distributed around the engine, and the heat conduction through a wall between the gas and the coolant. The numerical model adopted is based on the finite-volume method with a second-order scheme. It was noted that it is important to use variable properties in order to predict the maximum wall temperature in the rocket engine and the drop in pressure of the coolant as it moves along the channels, whereas the thrust of the engine can be calculated with constant properties.     

Effects of spontaneous and inoculated fermentation on the volatile profile of lychee (Litchi chinensis Sonn) fermented beverages

The aim of this study was to evaluate the contribution of yeast to the volatile profile of beverages obtained by the fermentation of lychee must through inoculated (Saccharomyces cerevisiae strains UFLA CA116 , UFLA CA1183 and UFLA CA1174 ) and spontaneous fermentation. Higher alcohols and esters were the primary volatiles detected by SPME/GC–MS. A Principal Component Analysis indicated similarities between UFLA CA116 and UFLA CA1183 and between UFLA CA1174 and spontaneous fermentation. Changing the yeast strain used in the fermentation process has the potential to modulate the volatile profile of fermented beverages. The beverage produced by the inoculation of yeast CA1183 showed the most complex aroma profile compared to the other beverages.     

A legal cross-references taxonomy for reasoning about compliance requirements

Companies must ensure their software complies with relevant laws and regulations to avoid the risk of costly penalties, lost reputation, and brand damage resulting from non-compliance. Laws and regulations contain internal cross-references to portions of the same legal text, as well as cross-references to external legal texts. These cross-references introduce ambiguities, exceptions, as well as other challenges to regulatory compliance. Requirements engineers need guidance as to how to address cross-references in order to comply with the requirements of the law. Herein, we analyze each external cross-reference within the U.S. Health Insurance Portability and Accountability Act (HIPAA) Privacy Rule, the Gramm?CLeach?CBliley Act (GLBA), and the GLBA Financial Privacy Rule to determine whether a cross-reference either introduces a conflicting requirement, a conflicting definition, or refines an existing requirement. Herein, we propose a legal cross-reference taxonomy to aid requirements engineers in classifying cross-references as they specify compliance requirements. Analyzing cross-references enables us to address conflicting requirements that may otherwise thwart legal compliance. We identify five sets of conflicting compliance requirements and recommend strategies for resolving these conflicts.     

Evaluation of a hydrothermal process for pretreatment of wheat straw—effect of particle size and process conditions

BACKGROUND: Hydrothermal processes are an eco‐friendly processes that provide an interesting alternative for chemical utilization of lignocellulosic materials, in which water and crop residues are the only reagents. In this work the effect of process conditions (size distribution of the wheat straw, temperature and time) was evaluated against production of fermentable products. RESULTS: The use of milled wheat straw fractions as a raw material containing blends of different particle size distribution showed that the latter had an influence on the final sugars in the hydrolysate. Improved values of glucose (21.1%) and xylose yields (49.32%) present in the hydrolysate were obtained with treatment severity factors of 2.77 and 3.36, respectively. Mathematical models were developed aimed at establishing the effect of process conditions on monosaccharide concentration and its degradation in the liquor. CONCLUSION: This work shows that the use of wheat straw blends with various particle sizes has a significant effect on the extraction of fermentable products. The effect of treatment severity, which takes into account both processing time and temperature was also evaluated. These results are of importance for process design. Copyright © 2010 Society of Chemical Industry     

Fundamental Parameters for the Stiffness and Strength Control of Artificially Cemented Sand

The treatment of soils with cement is an attractive technique when the project requires improvement of the local soil for the construction of subgrades for rail tracks, as a support layer for shallow foundations and to prevent sand liquefaction. As reported by Consoli et al. in 2007, a unique dosage methodology has been established based on rational criteria where the voids/cement ratio plays a fundamental role in the assessment of the target unconfined compressive strength. The present study broadened the research carried out by Consoli et al. in 2007 through quantifying quantifies the influence of voids/cement ratio on the initial shear modulus (G0) and Mohr-Coulomb effective strength parameters (c′,?′) of an artificially cemented sand. A number of unconfined compression and triaxial compression tests with bender elements measurements were carried out. It was shown that the void/cement ratio defined as the ratio between the volume of voids of the compacted mixture and the volume of cement is an appropriate parameter to assess both initial stiffness and effective strength of the sand-cement mixture studied.     

Parameter identification and shape optimization

Simulation of metal forming processes using the Finite Element Method (FEM) is a well established procedure, being nowadays possible to develop alternative approaches, such as inverse methodologies, in solving complex problems. In the present paper, two types of inverse approaches will be discussed, namely the parameter identification and the shape optimization problems. The aim of the former is to evaluate the input parameters for material constitutive models that would lead to the most accurate set of results respecting physical experiments. The second category involves determining the initial geometry of a given specimen leading to a desired final geometry after the forming process. The purpose of the present work is then to formulate these inverse problems as optimization problems, introducing a straightforward methodology of process optimization in engineering applications such as metal forming and structural analysis. To reach this goal, an integrated optimization approach, using a finite element code together with a numerical optimization program, was employed. A gradient-based optimization method, as a combination of the steepest-descent method and the Levenberg-Marquardt techniques, was used. Numerical applications in the parameter optimization category include, namely, the characterization of a non-linear elasto-plastic hardening model and the determination of the parameters for a nonlinear hyperelastic model. It is also discussed the simultaneous identification of both constitutive material model parameters and the friction coefficient parameters. From the point of view of shape optimization problems, the determination of the initial geometry of a specimen in a upsetting billing problem as well as a methodology for defining the most suited blank shape to be formed in a square cup, are discussed. The final results for both categories show that this kind of algorithms have great potential for future developments in more demanding and realistic benchmarks. It is also worth noting that the presented integrated methodology can be easily applied to a first introduction of optimization techniques and numerical simulation to undergraduate courses in engineering.