Properties of poly(ethylene terephthalate)–poly(ethylene naphthalene 2,6‐dicarboxylate) blends with montmorillonite clay

The production and properties of blends of poly(ethylene terephthalate) (PET) and poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) with three modified clays are reported. Octadecylammonium chloride and maleic anhydride (MAH) are used to modify the surface of the montmorillonite–Na⁺ clay particles (clay–Na⁺) to produce clay–C18 and clay–MAH, respectively, before they are mixed with the PET/PEN system. The transesterification degree, hydrophobicity and the effect of the clays on the mechanical, rheological and thermal properties are analysed. The PET–PEN/clay–C18 system does not show any improvements in the mechanical properties, which is attributed to poor exfoliation. On the other hand, in the PET–PEN/clay–MAH blends, the modified clay restricts crystallization of the matrix, as evidenced in the low value of the crystallization enthalpy. The process‐induced PET–PEN transesterification reaction is affected by the clay particles. Clay–C18 induces the largest proportion of naphthalate–ethylene–terephthalate (NET) blocks, as opposed to clay–Na⁺ which renders the lowest proportion. The clay readily incorporates in the bulk polymer, but receding contact‐angle measurements reveal a small influence of the particles on the surface properties of the sample. The clay–Na⁺ blend shows a predominant solid‐like behaviour, as evidenced by the magnitude of the storage modulus in the low‐frequency range, which reflects a high entanglement density and a substantial degree of polymer–particle interactions. Copyright © 2005 Society of Chemical Industry     

Probing the thermal decomposition process of layered double hydroxides through in situ <Superscript>57</Superscript>Fe Mössbauer and in situ X-ray diffraction experiments

The thermal decomposition properties of Mg–Fe hydrotalcites were studied through in situ ⁵⁷Fe Mössbauer spectroscopy and in situ X-ray diffraction. Abrupt changes in the quadrupolar splitting measured in the Mössbauer spectra revealed a phase transition from the starting lamellar structure to a new crystalline arrangement. By analyzing the Mössbauer parameters we show that the material is highly disordered in the 300–400 °C temperature range. This hypothesis is confirmed by the X-ray results whose diffractograms indicated the collapse of the lamellar structure and the formation of a solid solution.     

Molecular weight effect on the obtainment of parallel and perpendicular orientation in thermotropic poly(diethylene glycol <Emphasis Type="Italic">p,p′</Emphasis>-bibenzoate)

Summary The effect of molecular weight on the uniaxial orientation process has been analyzed in two samples of thermotropic poly(diethylene glycol p,p′-bibenzoate), evaluating the influence of that parameter on the type of orientation obtained. Several strain rates and deformation temperatures have been tested in order to map out the conditions for obtaining the two different kinds of orientation. The results show that in the lower molecular weight PDEB sample (M_w=31200) it is rather easy to get exclusively perpendicular “anomalous” orientation, with the molecular axes aligned transversely to the stretching direction. However, it is extremely difficult to obtain 100% parallel “normal” orientation. On the contrary, either type of orientation or a mixture of them can be easily developed for the higher molecular weight PDEB sample (M_w=102900).     

Analytic methods for modeling longitudinal data from rolling therapy groups with membership turnover.

Interventions for a variety of emotional and behavioral problems are commonly delivered in the context of treatment groups, with many using rolling admission to sustain membership (i.e., admission, dropout, and discharge from group are perpetual and ongoing). The authors present an overview of the analytic challenges inherent in rolling group data and outline commonly used (but flawed) analytic and design approaches to addressing (or sidestepping) these issues. Moreover, the authors propose use of latent class pattern mixture models (LCPMMs) as a statistically and conceptually defensible approach for modeling treatment data from rolling groups. The LCPMM approach is illustrated with rolling group data from a group-based alcoholism pilot treatment trial (N = 128). Different inferences were made with regard to treatment efficacy under LCPMM vs. the commonly used standard group-clustered latent growth model (LGM); coupled with other preliminary findings in this area, inferences from LGMs may be overly liberal when applied to data from rolling groups. Continued work on data analytic difficulties in groups with membership turnover is critical for furthering the ecological validity of research on behavioral treatments. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

包含热模型的大功率MOSFET新型电路模型

功率转换器的功率密度越来越高，发热问题越来越严重，这种功率转换器的设计对现代大功率半导体技术提出了新的挑战；因而，热问题的优化设计和核实变得比大功率器件的电模型更加重要，本文提出一种新的PSPICE模型，可以利用它计算MOSFET芯片在瞬变过程中的温度。其中的热阻可以从制造商提供的产品使用说明书得到。本文介绍的模型提供发热和电气参数之间的动态关系。它建立了与许可的热环境的关系，例如，栅极驱动电路、负载、以及散热器的分析与优化设计。利用这个模型可以改善散热器的设计。由于决定功率损耗的参数是分布在一定范围内，受生产制造的影响很大，因而散热器的设计往往由于无法预先知道功率损耗而无法进行。     

Wake and aerodynamics loads in multiple bodies—application to turbomachinery blade rows

Two-dimensional, unsteady flow around bodies of complex geometry (or multiple bodies) at high Reynolds number is simulated using the vortex method. This method is modified to take into account the sub-grid scale phenomena through a second order velocity structure function model adapted to the Lagrangian scheme. The dynamics of the body wake is computed using the convection-diffusion splitting algorithm; the convection process is carried out with a Lagrangian Adams-Bashforth time-marching scheme and the diffusion process is simulated using the random walk method. The pressure distribution is obtained using an integral equation derived from the pressure Poisson equation, which was first developed for a single body. Results for the numerical simulation around a linear cascade of airfoils are presented. As the flow is periodic in the y direction, the discrete vortex shedding need only be considered for a reference airfoil. The flow characteristics around the NACA 65-410 series airfoils are calculated and comparisons are made with results available in the literature.     

Molecular dynamics simulations of polyphosphazenes: poly[bis(chloro)phosphazene][NPCl2] n

Suitable parameter sets for the CHARMm force field were derived for the structural units in polychlorophosphazene [P=N, P N, P Cl] using the Dinur Hagler energy second derivative procedure based on quantum mechanical SCI calculations using the 6–31G^* basis set. To validate the reliability of the parameter set, structural results obtained with CHARMm for the adopted model compounds (OP₂NCl₅ and OP₃N₂Cl₅) were compared with those derived fromab initio quantum mechanics using the 6–31G^* basis set. Application of molecular dynamics (MD) simulations in combinatioin with the available X-ray diffraction data provided structural and conformational information on the polymer. The calculation made using the periodic boundary conditions (PBC) agree well with the polychlorophosphazene ordered in a monoclinic unit cell (a=5.98,b=12.99,c=4.92 A; β=111.7). This model was stabilized mainly by the image atoms contribution to the electrostatic energy term and had aquasi-planar conformation of the backbone chain (glide symmetry). The MD calculations also provided evidence that the difference between single and double PN bonds is less marked than that measured experimentally. This result is, however, in agreement with more recent and accurate X-ray studies on poly(methylphosphazene). Validation of the polymer model provided a complete picture, otherwise experimentally inaccessible, of the internal fluctuations of the polymeric chains.     

Headspace methods for volatile components of cocoa butter

The suitability of dynamic headspace (DHS) method for isolating the volatile components of cocoa butter for subsequent GC analysis was evaluated. Volatile trapping followed by solvent or thermal desorption was performed with different adsorbent traps. DHS analysis by thermal desorption performed with Porapak Q showed the best results in terms of reproducibility and recovery of volatiles.