Catalytic steam reforming of tar for enhancing hydrogen production from biomass gasification: a review

Presently, the global search for alternative renewable energy sources is rising due to the depletion of fossil fuel and rising greenhouse gas (GHG) emissions. Among alternatives, hydrogen (H₂) produced from biomass gasification is considered a green energy sector, due to its environmentally friendly, sustainable, and renewable characteristics. However, tar formation along with syngas is a severe impediment to biomass conversion efficiency, which results in process-related problems. Typically, tar consists of various hydrocarbons (HCs), which are also sources for syngas. Hence, catalytic steam reforming is an effective technique to address tar formation and improve H₂ production from biomass gasification. Of the various classes in existence, supported metal catalysts are considered the most promising. This paper focuses on the current researching status, prospects, and challenges of steam reforming of gasified biomass tar. Besides, it includes recent developments in tar compositional analysis, supported metal catalysts, along with the reactions and process conditions for catalytic steam reforming. Moreover, it discusses alternatives such as dry and autothermal reforming of tar.     

Development of high performance amine functionalized zeolitic imidazolate framework (ZIF-8)/cellulose triacetate mixed matrix membranes for CO2/CH4 separation

High cost and complex fabrication process of inorganic membranes and lower position of pristine polymeric membranes in the Robeson upper bound curve urged the researchers to develop mixed matrix membranes (MMMs). Cellulose acetate being most commercially used polymer, dominates the market of CO₂ separation mainly because of low cost and environmental friendly resource. In the present study, MMMs consists of amine functionalized zeolitic imidazolate framework (NH₂-ZIF-8) and cellulose triacetate were fabricated for the first time. NH₂-ZIF-8 was used as a filler because the pore size of ZIF-8 is between the kinetic diameter of separating gases (CO₂ and CH₄). Moreover,  NH₂ group attached on the surface of ZIF-8 has affinity with condensable gases like CO₂. Morphology, crystallinity, tensile strength and functional groups of fabricated membranes were investigated using different analytical techniques. Results revealed that the increase of feed pressure has increased CO₂ permeability and decreased permselectivity. However, improvements in gas separation performance were observed with the addition of nanofiller. Best position in Robeson's upper bound curve at 4 bar was obtained with 10 wt% loading with CO₂ permeability and CO₂/CH₄ permselectivity of 218 barrer and 13.84, respectively. The improvement in the gas separation performance with loading is attributed to the increased diffusion coefficients as well as solubility coefficients, which was increased to 33% and 3.8%, respectively.     

Highly-efficient technique for automatic segmentation of X-ray bone images based on fuzzy logic and an edge detection technique

Multidimensional Systems and Signal Processing - Development of medical image segmentation techniques has become one of the most important challenges in many applications that employ...     

Geothermal and solar energy–based multigeneration system for a district

In this study, parabolic trough collector with an integrated source of geothermal water is used with regenerative Rankine cycle with an open feedwater heater, an electrolyzer, and an absorption cooling system. The absorption fluids used in the solar collectors were Al₂O₃‐ and Fe₂O₃‐based nanofluids. Detailed energetic and exergetic analyses are done for the whole system including all the components. A comparative analysis of both the used working fluids is done and plotted against their different results. The parameters that are varied to change the output of the system are ambient temperature, solar irradiance, the percentage of nanofluids, the mass flow rate of the geothermal well, the temperature gradient of the geothermal well that had an effect on the net power produced, and the outlet temperature of the solar collector overall energetic and exergetic efficiencies. Other useful outputs by this domestic integrated multigeneration system are the heating of domestic water, space heating (maintaining the temperature at 40°C‐50°C), and desalination of seawater (flash distillation). The hydrogen production rate for both the fluids diverges with each other, both producing average from 0.00490 to 0.0567 g/s.     

Numerical modelling of second‐grade fluid flow past a stretching sheet

The present numerical study reports the chemically reacting boundary layer flow of a magnetohydrodynamic second‐grade fluid past a stretching sheet under the influence of internal heat generation or absorption with work done due to deformation in the presence of a porous medium. To distinguish the non‐Newtonian behaviour of the second‐grade fluid with those of Newtonian fluids, a very popularly known second‐grade fluid flow model is used. The fourth order momentum equation with four appropriate boundary conditions along with temperature and concentration equations governing the second‐grade fluid flow are coupled and highly nonlinear in nature. Well‐established similarity transformations are efficiently used to reduce the dimensional flow equations into a set of nondimensional ordinary differential equations with the necessary conditions. The standard bvp4c MATLAB solver is effectively used to solve the fluid flow equations to get the numerical solutions in terms of velocity, temperature, and concentration fields. Numerical results are obtained for a different set of physical parameters and their behaviour is described through graphs and tables. The viscoelastic parameter enhances the velocity field whereas the magnetic and porous parameters suppress the velocity field in the flow region. The temperature field is magnified for increasing values of the heat source/sink parameter. However, from the present numerical study, it is noticed that the flow of heat occurs from sheet to the surrounding ambient fluid. Before concluding the considered problem, our results are validated with previous results and are found to be in good agreement.     

A Dual-Band Printed Antenna Design Based on Annular Koch Snowflake Slot Structure

Wireless Personal Communications - The design of a fractal based slot antenna, to serve the dual-band communication applications, is proposed in this paper. The structure of the proposed antenna is...     

Design and Analysis of Single-Bit Ternary Matched Filter

Wireless Personal Communications - Matched filtering has found its way in many diverse applications such as communication, signal processing and more. The emphasis of this paper is on the design...     

Liaison of phenolic acids and biological activity of escalating cultivars of Daucus carota

The objective of the present study was to analyze and compare the phenolic compounds and their antioxidant capacities of new lines of Dacus carota. The selected cultivars showed high variation in the contents of total phenolics (30.26–65.39 mg/100 g FW) and total ascorbic acid (41.12–58.36 mg/100 g FW). Analysis on RP-HPLC revealed that hydroxycinnamic acids and its derivatives were major phenolic compounds present in D. carota extracts, whereas 5-caffeolquinic acid was a major hydroxycinnamic acid (ranged from 30.26 to 65.39 mg/100 g FW). DCP cultivar showed high total antioxidant capacity (77.69 mg/100 g), 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging capacity (52.36 mg/100 g), superoxide radical scavenging capacity (53.69 mg/100 g), and hydroxyl radical scavenging capacity (51.91 mg/100 g). A linear relationship was found between total phenolic acid contents and antioxidant capacity. Both phenolic compounds and antioxidant capacities varied significantly (ρ < 0.05) among cultivars. DCP cultivar was found to be a rich source of phenolics and ascorbic acid with high antioxidant activity.