Thermally stimulated discharge current studies in pure and fe-doped polystyrene films

Studies were made on the thermally stimulated discharge currents (TSDCs) in pure (undoped) and Fe-doped polystyrene films as a function of polarizing field, polarizing temperature and dopant concentration. While undoped films exhibited a single peak, doped films showed two peaks one at low temperatures and another at high temperatures. The low temperature peak, which exhibits a shift towards lower temperatures with increasing dopant concentration, is attributed to the relaxation of the main chain, while the high temperature peak, which shows a tendency to shift towards higher temperatures with dopant concentration, is due to space charge polarization. The TSDCs were higher for low dopant concentrations than their undoped counterparts, while for high concentrations of the dopant, the TSDCs decreased. Formation of charge transfer complexes at low dopant concentrations and molecular aggregates at higher dopant concentrations are suggested as the possible reasons for this behaviour.     

Characterization of poly(vinyl alcohol)/sodium bromide polymer electrolytes for electrochemical cell applications

Sodium‐ion conducting polymer electrolytes based on poly(vinyl alcohol) complexed with sodium bromide were prepared with a solution‐casting technique. The structure of these films was determined with X‐ray diffraction, and the complexation of the salt with the polymer was confirmed with Fourier transform infrared spectroscopy studies. Electrical conductivity was measured with an alternating‐current impedance analyzer in the frequency range of 100 Hz to 1 MHz and in the temperature range of 303–373 K. It was observed that the magnitude of conductivity increased with the increase in the salt concentration as well as the temperature. The nature of the charge transport in these polymer electrolyte films was determined with both Wagner's polarization technique and the Watanabe technique. The dominant conducting species were found to be ions, particularly anions. Optical absorption studies were performed in the wavelength range of 200–600 nm, and the absorption edge, direct band gap, and indirect band gap values were evaluated. Electrochemical cells were fabricated, and their discharge characteristics were studied. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Functional copolymer of geraniol and acrylonitrile: Synthesis and characterization

The radical copolymerization of acyclic terpene namely geraniol [GER] with acrylonitrile [AN] in DMF at (70 ± 0.1)°C for 1 h, using benzoylperoxide (BPO) as an initiator has been carried out under inert atmosphere of nitrogen. The kinetic expression for reaction is R_p ∝ [BPO]^0.5 [AN]^1.0 [GER]^1.0. The IR spectrum of the copolymer shows bands at 3432 and at 2244 cm^?1 due to ? OH group of GER and ? CN group of AN, respectively. The ¹³C‐NMR spectrum shows peaks at 73–75 δ ppm and 116–120 δ ppm due to ? OH group of GER and ? CN group of AN, respectively. The thermogravimetric analysis and differential scanning calorimetry study shows that copolymer is thermally stable up to 407°C and has glass transition temperatures (T_g) 56°C. The reactivity ratios r₁ (AN) and r₂ (GER) have been calculated as 0.05 and 0.005, respectively. The Alfrey‐Price Q‐e parameter for GER has been calculated as 0.094 and ?2.0, respectively. The molecular weights of the copolymers have been evaluated by gel‐permeation chromatography. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Metallurgical Investigation of a Prematurely Failed Concentric Reducer Tube Used in a Hot-Rolling Mill

A concentric reducer tube, which was a part of the top exit roughing hydraulic descaler in a hot strip mill failed prematurely under working pressure. A detailed metallurgical investigation comprising physical examination, optical microscopy, scanning electron microscopy, and electron probe microanalysis was carried out to find out the genesis of the failure. Physical examination revealed cracks located symmetrically around the circumference of the tube that ran along its full length, up to the weld beads at both ends. Optical microscopy of etched samples revealed a banded ferrite-pearlite structure and the existence of forging folds near the change-in-section(160° fillets). Cracks were found to initiate from these forging folds. No structural abnormalities were found in the weld beads and heat-affected zones.     

Synthesis and characterization of acidic properties of Al-SBA-15 materials with varying Si/Al ratios

Al-SBA-15 of varying Si/Al ratios in the range 11.4–78.4 was synthesized using tri-block copolymer P123. The calcined materials were examined by XRD, pore size distribution, surface area, ²⁷Al NMR spectroscopy. The acidity and acid strength distribution were studied using microcalorimetric adsorption of NH₃. The acidic properties were also examined by cumene cracking reaction as a function of Si/Al ratios. Systematic variation of acidity and activity was observed as a function of Si/Al ratio. The initial heats of NH₃ adsorption correlated well with activity indicate that acid sites with ΔH > 100 kJ/mole is responsible for cumene cracking activity. Linear correlations were obtained with total acidity and cumene cracking activities. The tetrahedral aluminum was found to be responsible for the observed acidities and catalytic activities.     

Dependence of mutation induction on fast-neutron energy in a human epithelial teratocarcinoma cell line (P3)

Cultivation of Candida albicans NIH B-792 (serotype B) at high temperature (37 degrees C) for 48 h in yeast extract-containing Sabouraud liquid medium (YSLM) provided the following findings in comparison with the findings obtained after incubation at 27 degrees C. Growth of the blastoconidia of this strain was decreased, with a dry weight of 9%, and the cells were deficient in cytokinesis. The cells did not undergo agglutination with serum factor 5 from a commercially available serum factor kit (Candida Check). Mannan (B-37-M) obtained from the cells cultured at 37 degrees C had partially lost its reactivity against serum factor 4 and lost most of its reactivity against serum factor 5 in an enzyme-linked immunosorbent assay (ELISA) in contrast to that (B-27-M) at 27 degrees C. Both cells and mannan prepared by cultivation first at 37 degrees C and then at 27 degrees C entirely recovered their reactivities with serum factors 4 and 5. 1H-nuclear magnetic resonance analysis also revealed that B-37-M had lost a beta-1,2-linked mannopyranose unit and retained a phosphate group. Similar changes were observed in the three other serotype B strains used in the study. The beta-1,2-linked mannooligosaccharides longer than mannotetraose were not included among the products released from B-37-M by mild acid treatment. The results of the inhibition ELISA with a series of beta-1,2-linked mannooligosaccharides from biose to octaose (M2 to M8, respectively) showed that the reactivity against serum factor 4 was inhibited most strongly by the oligosaccharides M4 to M8 and that the reactivity against serum factor 5 was inhibited completely by relatively longer oligosaccharides, M5 to M8, indicating their participation as the antigenic factor 5 epitopes.     

Neem oil as a sand fly (Diptera: Psychodidae) repellent

The repellent action of neem oil was evaluated against sand flies under laboratory and field conditions. Concentrations of 2% neem oil mixed in coconut or mustard oil provided 100% protection against Phlebotomus argentipes throughout the night under field conditions; against Phlebotomus papatasi it repelled sand flies for about 7 h in the laboratory. Neem oil is an indigenous product and a low-cost alternative for personal protection against sand fly bites.