Effects of dietary oils and methyl ethyl ketone peroxide onin vivo lipid peroxidation and antioxidants in rat heart and liver

Weanling male Sprague-Dawley rats were fed diets for four weeks which differed in their content of n−6 (corn oil; CO) and n−3 fatty acids (fish oil; FO), but were similar in their content of saturated and monounsaturated fatty acids and vitamin E. At the end of the four-week feeding period, each dietary group was subdivided into two groups. One group received a single placebo injection of α-tocopherol-stripped corn oil (TSCO); the other group received a single injection of the free radical generator, methyl ethyl ketone peroxide (MEKP), in TSCO. Twenty-four hours after injection, the effect of dietary oil and MEKP treatment on endogenous lipid peroxide (LPO) production (measured as methylene blue formed by the “Determiner LPO” assay), glutathione (GSH) and vitamin E content, and fatty acid composition of phosphatidylcholine and phosphatidylethanolamine in heart and liver from unfasted animals were measured. FO-fed rats had significantly heavier hearts and livers, increased levels of n−3 fatty acids in membrane phospholipids, and higher liver LPO levels than CO-fed rats. MEKP treatment resulted in significantly lower body weights and liver GSH levels. The data indicate that dietary n−3 fatty acids increase lipid peroxidation in liver somewhat more than in heart. The study also demonstrates that the effect of induced oxidative stress due to a single dose of MEKP on lipid peroxide formation and antioxidant status in tissues from unfasted animals was independent of the dietary oils.     

Update on the pharmacology of Spirulina (Arthrospira), an unconventional food

Spirulina (Arthrospira), a filamentous, unicellular alga, is a cyanobacterium grown in certain countries as food for human and animal consumption. It is also used to derive additives in pharmaceuticals and foods. This alga is a rich source of proteins, vitamins, amino acids, minerals, and other nutrients. Its main use, therefore, is as a food supplement. Over the last few years, however, it has been found to have many additional pharmacological properties. Thus, it has been experimentally proven, in vivo and in vitro that it is effective to treat certain allergies, anemia, cancer, hepatotoxicity, viral and cardiovascular diseases, hyperglycemia, hyperlipidemia, immunodeficiency, and inflammatory processes, among others. Several of these activities are attributed to Spirulina itself or to some of its components including fatty acids omega-3 or omega-6, beta-carotene, alpha-tocopherol, phycocyanin, phenol compounds, and a recently isolated complex, Ca-Spirulan (Ca-SP). This paper aims to update and critically review the results published over the last few years with regards to these properties. The conclusion is that even if this cyanobacterium has been one of the most extensively studied from the chemical, pharmacological and toxicological points of view, it is still necessary to expand the research in order to have more consistent data for its possible use in human beings.     

An efficient method for a numerical description of virgin olive oil color with only two absorbance measurements

Four polynomial expressions are obtained that provide a good approximation and an easy, rapid calculation of the chromatic coordinates and the chroma—L ^*, a ^*, b ^*, and C—for the illuminant C and the standard observer, for a virgin or extra virgin olive oil; absorbance is measured at only 480 and 670 nm. These are as follows: L ^*=0.556458(A₄₈₀)²−2.51145A₄₈₀+0.55504(A₆₇₀)²−8.53016A₆₇₀+98.4089; a ^*=0.177372(A₄₈₀)²+2.1363A₄₈₀+1.43254(A₆₇₀)²−0.789231A₆₇₀−13.9246; b ^*=−16.0277(A₄₈₀)²+79.8932A₄₈₀−5.06558(A₆₇₀)²+3.36169A₆₇₀+31.9405; C=−15.8439(A₄₈₀)²+78.9312A₄₈₀−5.26784(A₆₇₀)²+3.56917A₆₇₀+33.3927. These give acceptable results, making the method a practical alternative to the extremely laborious Commission Internationale d’Eclairage (CIE) L ^* a ^* b ^* system, by which 391 absorbance values must be measured individually, nanometer by nanometer, before applying more complex equations. The validity of the proposed method has been confirmed by comparison, using a set of 20 sample oils different from the set of 25 oils used to generate the order of the equations. The variations between the values provided by the proposed and standard methods, respectively, had a mean of 0.00 for each of the chromatic variables—L ^* , a ^* , b ^* , and C; SD were moderate (0.71, 0.52, 1.22, and 1.22, respectively); the root mean square and the R ²-terms also confirmed the validity of the method.     

Effects of the blending sequence and interfacial agent on the morphology and mechanical properties of injection molded PC/PP Blends

Summary The effects of blending sequence and the addition of an interfacial agent (triblock copolymer styrene-butylene ethylene/styrene, Kraton G1652) on the morphology and the mechanical properties of Polycarbonate (PC)/Polypropylene (PP) blends prepared by injection molding were studied. This study presents an analysis of impact resistance, tensile properties and morphology of the raw materials and the blends at different compositions. The blends, before being injected, were prepared in a twin-screw extruder by different sequences of blending. The results indicate that the blending sequence and the presence of humidity significantly affect the properties and morphology of the blends. For ternary blends (PC/PP/Kraton), only one-step mixing before injection molding proved to be sufficient to improve mechanical properties. Increasing the amount of blending steps did not present a significant change in properties. With the addition of the interfacial agent, higher impact resistance and particle size reduction were observed.     

New sesquiterpenes fromMaytenus species (Celastraceae). Taxonomic and chemotaxonomic considerations concerning chileanMaytenus

Three new dihydro--agarofuran sesquiterpenes from two species ofMaytenus were isolated and their structures were elucidated by means of¹H and¹³C NMR studies. The differences and similarities noted in the chemical content of the dihydro--agarofuran sesquiterpenes from the fourMaytenus species from Chile are in line with the taxonomic characterization of these species; their geographical distribution is also given.     

Thermotropic polyester: the influence of the spacer on the physical properties

Thermotropic polyesters prepared from series of 4,4-dihydroxy-,w-diphenoxy alkanes and 4,4-dichloroformyl-,w-diphenoxy alkanes are well known. The substitution of a methylenic spacer by an oxyethylenic spacer in the main chain of these polyesters drastically modifies their physical properties, particularly the mesogenic transition temperatures, as can be observed by DSC and thermooptical analysis. The thermal stability and the polymer solubility in common organic solvents of these polymers did not show a significant change. The physical properties of the two thermotropic polyesters prepared in diphenyl ether were evaluated.     

Invariant three- and four-phase equilibria in the magnesium-rich corner of the Mg-Cu-Sn ternary system

Invariant three- and four-phase equilibria in the magnesium-rich corner of the Mg-Cu-Sn ternary system have been studied by differential thermal analysis, optical microscopy, electron probe microanalysis and X-ray diffraction. The L(Mg) + Mg₂ Cu + Mg₂Sn ternary eutectic reaction was found to be at 467 °C and at Mg–13.5 at % Cu–4.4 at% Sn. The LMg₂Cu + Mg₂Sn pseudo-binary eutectic reaction is tentatively located at 522°C and at Mg–26.0 at % Cu–7.7 at % Sn.     

Influence of different reactor types on Nannochloropsis oculata microalgae culture for lipids and fatty acid production

Greenhouse gases emitted into the atmosphere by burning of fossil fuels cause global warming. One option is obtaining biodiesel. Nannochloropsis oculata was cultured under different light intensities and reactors at 25°C for 21 days with f/2 medium to assess their effects on cell density, lipid, and fatty acids (FAs). N. oculata improved cell density on fed-batch glass tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹, yielding 3.5 × 10⁸ cells ml⁻¹, followed by fed-batch Erlenmeyer flask (1 L) at 650 μmol E m⁻² s⁻¹ with 1.7 × 10⁸ cells ml⁻¹. The highest total lipid contents (% g lipid × g dry biomass⁻¹) were 44.4 ± 0.8% for the reactor (1 L) at 650 μmol E m⁻² s⁻¹ and 35.2 ± 0.2% for the tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹, until twice as high compared with the control culture (Erlenmeyer flask 1 L, 80 μmol E m⁻² s⁻¹) with 21.2 ± 1%. Comparing the total lipid content at 200 μmol E m⁻² s⁻¹, tubular reactor (7 L) and reactor 1 L achieved 35.2 ± 0.2% and 28.3 ± 1%, respectively, indicating the effect of shape reactor. The FAs were affected by high light intensity, decreasing SFAs to 2.5%, and increased monounsaturated fatty acids + polyunsaturated fatty acids to 2.5%. PUFAs (20:5n-3) and (20:4n-3) were affected by reactor shape, decreasing by half in the tubular reactor. In the best culture, fed-batch tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹ contains major FAs (16:0; 38.06 ± 0.16%), (16:1n-7; 30.74 ± 0.58%), and (18:1n-9; 17.15 ± 0.91%).     

Effect of different surface treatments on polypropylene composites reinforced with yerba mate fibers: Physical,mechanical, chemical,and morphological properties

This study presents the preparation of post-consumer polypropylene (r-PP) composites filled with 30 wt% yerba mate (YM) stick particles. To improve the fiber–matrix adhesion, three surface treatments were performed: alkaline treatment with sodium hydroxide (NaOH) and use of 3-aminopropyltriethoxysilane (APTS) and maleic anhydride graft polypropylene copolymer (PP-g-MA) as coupling agents. Mechanical properties including tensile, flexural, and impact resistance were determined, and chemical (Fourier transform infrared spectroscopy [FTIR]), physical (water absorption), and morphological analyses were performed. The main findings show that the treatments were efficient in improving the mechanical properties of the composites, with emphasis on the r-PP/YM30/APTS and r-PP/YM30/PP-g-MA composites, which proved to be superior in tensile, flexion and impact strength and absorption of water compared to the untreated composite. The morphological analysis showed a better interaction between the fiber and the polymeric matrix for the composites with YM/APTS and YM/PP-g-MA, which corroborates the results of tensile and flexural strength, as well as with the spectra of FTIR in which the chemical modification of the fibers is observed. However, the results show that these treatments are promising in obtaining composites with recycled matrix with better properties.