High Efficiency Poly(acrylonitrile) Electrospun Nanofiber Membranes for Airborne Nanomaterials Filtration

The potential of poly(acrylonitrile) electrospun membranes with tuneable pore size and fiber distributions were investigated for airborne fine‐particle filtration for the first time. The impact of solution concentration on final membrane properties are evaluated for the purpose of designing separation materials with higher separation efficiency. The properties of fibers and membranes are investigated systematically: the average pore distribution, as characterized by capillary flow porometry, and thermo‐mechanical properties of the mats are found to be dependent on fiber diameter and on specific electrospinning conditions. Filtration efficiency and pressure drop are calculated from measurement of penetration through the membranes using potassium chloride (KCl) aerosol particles ranging from 300 nm to 12 μm diameter. The PAN membranes exhibited separation efficiencies in the range of 73.8–99.78% and a typical quality factor 0.0224 (1 Pa^?1) for 12 wt% PAN with nanofibers having a diameter of 858 nm. Concerning air flow rate, the quality factor and filtration efficiency of the electrospun membranes at higher face velocity are much more stable than for commercial membranes. The results suggest that the structure of electrospun membranes is the best for air filtration in terms of filtration stability at high air flow rate.

     

Enhanced Thermal Conductivity of 5A Molecular Sieve with BNs Segregated Structures

5A molecular sieves have been widely used as adsorbents in cryogenic distillation for hydrogen isotope separation in fusion reactor engineering, but its low thermal conductivity is detrimental to the process stability. Improving the thermal conductivity of 5A molecular sieves is one of the most important goals for high‐performance devices. Here, firm segregated structures with boron nitride sheets (BNs) are constructed around 5A molecular sieve particles. SEM results show 30 µm BNs tend to form the better networks in comparison with that of 0.12 µm BNs at 40 wt% loadings. It is further verified that BNs with the larger size promote the thermal conductivity. Meanwhile, the thermal conductivity increases with the increasing amounts of BNs. XRD and specific surface area results indicate that the sintering and the addition of BNs exert negligible effects on the structure of 5A molecular sieve. These results indirectly show 5A molecular sieve with BNs segregated structures is very likely to be used for the application of hydrogen isotopic separation. Besides, this work provides new insight into the construction of segregated structure in inorganic porous materials.

     

Sub‐Micron Anisotropic InP‐based III–V Semiconductor Material Deep Etching for On‐Chip Laser Photonics Devices

Two InP‐based III–V semiconductor etching recipes are presented for fabrication of on‐chip laser photonic devices. Using inductively coupled plasma system with a methane free gas chemistry of chlorine and nitrogen at a high substrate temperature of 250 °C, high aspect ratio, anisotropic InP‐based nano‐structures are etched. Scanning electron microscopy images show vertical sidewall profile of 90° ± 3°, with aspect ratio as high as 10. Atomic Force microscopy measures a smooth sidewall roughness root‐mean‐square of 2.60 nm over a 3 × 3 μm scan area. The smallest feature size etched in this work is a nano‐ring with inner diameter of 240 nm. The etching recipe and critical factors such as chamber pressure and the carrier plate effect are discussed. The second recipe is of low temperature (?10 °C) using Cl₂ and BCl₃ chemistry. This recipe is useful for etching large areas of III–V to reveal the underlying substrate. The availability of these two recipes has created a flexible III–V etching platform for fabrication of on‐chip laser photonic devices. As an application example, anisotropic InP‐based waveguides of 3 μm width are fabricated using the Cl₂ and N₂ etch recipe and waveguide loss of 4.5 dB mm^?1 is obtained.

     

3‐D Printing and Development of Fluoropolymer Based Reactive Inks

Engineering reactive materials is an ever present goal in the energetics community. The desire is to have energetics configured in such a manner that performance is tailored and energy delivery can be targeted. Additive manufacturing (3‐D printing) is one area that could significantly improve our capabilities in this area, if adequate formulations are developed. In this paper, fluoropolymer based reactive inks are developed with micron (mAl) and nanoscale aluminum (nAl) serving, as the fuel at high solids loading (up to 67 wt%) and their viscosity required for 3‐D printing is detailed. For the pen‐type technique and valves used in this work, it is required to have viscosities on the order of 10⁴–10⁵ cP. For printed traces with apparent diameters under <500 μm, the combustion velocities for both micron and nano scale aluminum formulations, are approximately identical: 30 ± 3 versus 32 ± 2 mm s^?1, respectively. Further increasing the apparent diameter is shown to increase the combustion velocity in the case of the nanoscale aluminum formulation by four‐fold over that of the micron scale aluminum formulation, but it plateaus as it approaches an apparent diameter of 2 mm. The results suggest with proper architecture that tailorable combustion rates and energy delivery are feasible.

     

Impact of arteriovenous fistula cannulation on the quality of dialysis

Introduction: Adequate hemodialysis directly improves health. Puncturing an arteriovenous fistula (AVF) and the amount of blood recirculation greatly affect the quality of dialysis. Few studies have assessed the method to cannulate a fistula and its influence on efficiency of hemodialysis. Methods: This prospective pilot study included 14 patients with end‐stage renal failure receiving regular intermittent hemodialysis. Patients received three consecutive treatments with both needles directed upstream then three consecutive treatments with the venous needle directed upstream and the arterial needle directed downstream. With both techniques, the distance between the needles was kept constant at 2.5 cm. Recirculation rate and Kt/V ratio were measured during each treatment using thermodilution and a diascan Fresenius generator. Findings: The 14 patients received 84 hemodialysis sessions: i.e., 8 (57.1%) males and 6 (42.8%) females, mean age 62.3 ± 15.57 years. Results showed that mean recirculation rates and Kt/V did not significantly differ between the two techniques. Discussion: Because no significant difference was found between the two techniques, the direction of insertion of needles should be decided upon on a case‐by‐case basis depending on the anatomy of the AVF and the feasibility of the puncture.     

Autonomous Magnetic Microrobots by Navigating Gates for Multiple Biomolecules Delivery

The precise delivery of biofunctionalized matters is of great interest from the fundamental and applied viewpoints. In spite of significant progress achieved during the last decade, a parallel and automated isolation and manipulation of rare analyte, and their simultaneous on‐chip separation and trapping, still remain challenging. Here, a universal micromagnet junction for self‐navigating gates of microrobotic particles to deliver the biomolecules to specific sites using a remote magnetic field is described. In the proposed concept, the nonmagnetic gap between the lithographically defined donor and acceptor micromagnets creates a crucial energy barrier to restrict particle gating. It is shown that by carefully designing the geometry of the junctions, it becomes possible to deliver multiple protein‐functionalized carriers in high resolution, as well as MCF‐7 and THP‐1 cells from the mixture, with high fidelity and trap them in individual apartments. Integration of such junctions with magnetophoretic circuitry elements could lead to novel platforms without retrieving for the synchronous digital manipulation of particles/biomolecules in microfluidic multiplex arrays for next‐generation biochips.     

Research Advances in Microfiber Humidity Sensors

An overview of the numerous latest research in microfiber humidity sensors is carried out with a specific focus on measurement methods, humidity sensitive materials, probe structures, and sensing properties of different sensors. First, five mainstream measurement structures, including taper, fiber grating, coupler, resonator, and interferometer are reviewed. It is concluded that these measurement structures sense the physicochemical property variations of microfibers or sensitive films and exhibit the change of optical signal when exposed to environment. Second, the basic preparation methods, humidity‐sensing properties, and their advantages and disadvantages as humidity sensitive material are addressed. Then, the advantages and disadvantages of all the above sensing structures are also discussed and compared. Finally, the main existing problems and potential solutions of microfiber humidity sensors are pointed out.     

Template‐Free Fabrication of Mesoporous Alumina Nanospheres Using Post‐Synthesis Water‐Ethanol Treatment of Monodispersed Aluminium Glycerate Nanospheres for Molybdenum Adsorption

This work reports the template‐free fabrication of mesoporous Al₂O₃ nanospheres with greatly enhanced textural characteristics through a newly developed post‐synthesis “water‐ethanol” treatment of aluminium glycerate nanospheres followed by high temperature calcination. The proposed “water‐ethanol” treatment is highly advantageous as the resulting mesoporous Al₂O₃ nanospheres exhibit 2–4 times higher surface area (up to 251 m² g^?1), narrower pore size distribution, and significantly lower crystallization temperature than those obtained without any post‐synthesis treatment. To demonstrate the generality of the proposed strategy, a nearly identical post‐synthesis “water treatment” method is successfully used to prepare mesoporous monometallic (e.g., manganese oxide (MnO₂)) and bimetallic oxide (e.g., CuCo₂O₄ and MnCo₂O₄) nanospheres assembled of nanosheets or nanoplates with highly enhanced textural characteristics from the corresponding monometallic and bimetallic glycerate nanospheres, respectively. When evaluated as molybdenum (Mo) adsorbents for potential use in molybdenum‐99/technetium‐99m (⁹⁹Mo/^99mTc) generators, the treated mesoporous Al₂O₃ nanospheres display higher molybdenum adsorption performance than non‐treated Al₂O₃ nanospheres and commercial Al₂O₃, thereby suggesting the effectiveness of the proposed strategy for improving the functional performance of oxide materials. It is expected that the proposed method can be utilized to prepare other mesoporous metal oxides with enhanced textural characteristics and functional performance.     

Flexible Cationic Nanoparticles with Photosensitizer Cores for Multifunctional Biomedical Applications

One challenge for multimodal therapy is to develop appropriate multifunctional agents to meet the requirements of potential applications. Photodynamic therapy (PDT) is proven to be an effective way to treat cancers. Diverse polycations, such as ethylenediamine‐functionalized poly(glycidyl methacrylate) (PGED) with plentiful primary amines, secondary amines, and hydroxyl groups, demonstrate good gene transfection performances. Herein, a series of multifunctional cationic nanoparticles (PRP) consisting of photosensitizer cores and PGED shells are readily developed through simple dopamine‐involving processes for versatile bioapplications. A series of experiments demonstrates that PRP nanoparticles are able to effectively mediate gene delivery in different cell lines. PRP nanoparticles are further validated to possess remarkable capability of combined PDT and gene therapy for complementary tumor treatment. In addition, because of their high dispersities in biological matrix, the PRP nanoparticles can also be used for in vitro and in vivo imaging with minimal aggregation‐caused quenching. Therefore, such flexible nanoplatforms with photosensitizer cores and polycationic shells are very promising for multimodal tumor therapy with high efficacy.     

Immobilization of Photo‐Immunoconjugates on Nanoparticles Leads to Enhanced Light‐Activated Biological Effects

The past three decades have witnessed notable advances in establishing photosensitizer–antibody photo‐immunoconjugates for photo‐immunotherapy and imaging of tumors. Photo‐immunotherapy minimizes damage to surrounding healthy tissue when using a cancer‐selective photo‐immunoconjugate, but requires a threshold intracellular photosensitizer concentration to be effective. Delivery of immunoconjugates to the target cells is often hindered by I) the low photosensitizer‐to‐antibody ratio of photo‐immunoconjugates and II) the limited amount of target molecule presented on the cell surface. Here, a nanoengineering approach is introduced to overcome these obstacles and improve the effectiveness of photo‐immunotherapy and imaging. Click chemistry coupling of benzoporphyrin derivative (BPD)–Cetuximab photo‐immunoconjugates onto FKR560 dye‐containing poly(lactic‐co‐glycolic acid) nanoparticles markedly enhances intracellular photo‐immunoconjugate accumulation and potentiates light‐activated photo‐immunotoxicity in ovarian cancer and glioblastoma. It is further demonstrated that co‐delivery and light activation of BPD and FKR560 allow longitudinal fluorescence tracking of photoimmunoconjugate and nanoparticle in cells. Using xenograft mouse models of epithelial ovarian cancer, intravenous injection of photo‐immunoconjugated nanoparticles doubles intratumoral accumulation of photo‐immunoconjugates, resulting in an enhanced photoimmunotherapy‐mediated tumor volume reduction, compared to “standard” immunoconjugates. This generalizable “carrier effect” phenomenon is attributed to the successful incorporation of photo‐immunoconjugates onto a nanoplatform, which modulates immunoconjugate delivery and improves treatment outcomes.