Alternative PWHT to Improve High-Temperature Mechanical Properties of Advanced 9Cr Steel Welds

Creep-resistant 9Cr steels are extremely important in thermal power generation industry due to their marked resistance to creep and corrosion. The weldability of these alloys is critical since they are used in welded construction equipment. The required mechanical properties are achieved after post-weld heat treatment. This study examined the effect of different post-weld heat treatments on microstructure and mechanical properties of creep strength-enhanced 9Cr steel welding deposits. It was obtained with an experimental flux-cored arc welding wire used under protective gas (Ar-20% CO₂). The heat treatments used were: (1) tempering (760 °C?×?2 h), (2) solubilizing (1050 °C?×?1 h)?+?tempering (760 °C?×?2 h) and (3) solubilizing (1150 °C?×?1 h)?+?first tempering (660 °C?×?3 h)?+?second tempering (660 °C?×?3 h). All-weld metal chemical composition was analyzed, and hot tensile tests were carried out at different temperatures. Charpy-V impact tests and Vickers microhardness measurements were also performed. Microstructures were studied using x-ray diffraction and optical and scanning electron microscopy. In all cases, a martensitic matrix with intergranular and intra-granular precipitates was detected. In the as-welded condition, δ-ferrite was also found. Microhardness dropped, and the impact energy increased with post-weld heat treatments. The highest hot tensile strength result was achieved with samples submitted to austenization at 1150 °C and double tempering at 660 °C.     

Associated factors to dietary intake of fruits and vegetables in Bucaramanga, Colombia

The objective of this study was to determine associated factors to the consumption of fruit and vegetables (FV) in the adult population of each socioeconomic status (SES) in Bucaramanga, Colombia. We conducted a cross-sectional in a sample of 317 people and we measured socio-demographic, economic and anthropometric variables and dietary factors related to the purchase and consumption of FV. We made a survey, a 24-Hour dietary recall and we did anthropometric measurements. Portion sizes were estimated with a standardized set of utensils and food-photography atlas. Frequencies, measures of central tendency and dispersion were established and Logistic Regression models were used for the bi and multivariate analysis. Average consumption of FV was 162.6 g/day (188.5 g in high SES and 145.7 g in low SES, p = 0.056). On average 2 servings per day of FV (2.3 servings in high SES and 1.5 in low SES, p = 0.055). The prevalence of adequate intake of FV (more than 5 servings / day) was 8.6% (8.9% in high SES and 8.4% in low SES, p = 0.896). The associated factor to consumption of FV was BMI > or =25 (OR: 0.31, CI (95%): 0.11-0.89, p = 0.030), adjusted for occupation, income, SES, and number of family members. FV consumption is low; excess weight is the only variable associated to no-consumption of five or more servings; causes: cost to the consumption of fruit and flavor in the case of vegetables.     

Synthetic Chain Terminators Off‐Load Intermediates from a Type I Polyketide Synthase

Modular biocatalysis is responsible for the generation of countless bioactive products and its mining remains a major focus for drug discovery purposes. One of the enduring hurdles is the isolation of biosynthetic intermediates in a readily‐analysed form. We prepared a series of nonhydrolysable pantetheine and N‐acetyl cysteamine mimics of the natural (methyl)malonyl extender units recruited for polyketide formation. Using these analogues as competitive substrates, we were able to trap and off‐load diketide and triketide species directly from an in vitro reconstituted type I polyketide synthase, the 6‐deoxyerythronolide B synthase 3 (DEBS3). The putative intermediates, which were extracted in organic solvent and characterised by LC‐HR‐ESI‐MS, are the first of their kind and prove that small‐molecule chain terminators can be used as convenient probes of the biosynthetic process.     

Structure-activity relationship study of 16 a-thiocamptothecins: an integrated in vitro and in silico approach

The instability of the hydroxylactone E ring represents a critical drawback of camptothecins, because the lactone ring is recognized to be essential for stabilization of topoisomerase I‐mediated DNA cleavage. In an attempt to investigate the effect of the thiopyridone pharmacophofore on the molecular and pharmacological features of the drug, we prepared a series of novel 16 a‐thiocamptothecin analogues. Due to the sulfur atom, a destabilization of the hydrogen bond between the hydroxy group in position 17 of the opened E ring and the carbonyl of the pyridone moiety is predicted, thus shifting the equilibrium toward the closed lactone form and increasing the lipophilic properties of the compounds. This feature was associated with superior antiproliferative potency, with reduced interaction with the human serum albumin and with substantial increase of the persistence of the topoisomerase I–DNA cleavable complex. These effects were prominent for thio‐SN38, the most active compound of the series. The favorable interactions at the molecular and cellular level of the reported thiocamptothecins confer promising features, and these compounds warrant preclinical development.     

New glass-based coatings coloured with red pigments for Foamglas® panels

This work describes the design and development of new coloured glass-based coatings for Foamglas^® substrates. Four kinds of pigments were added in different proportions (1 and 5 wt% respectively) to a borate glassy matrix (labelled as G7) by two different mixing techniques; the chosen pigments were goethite (α-FeOOH), acicular hematite (Fe₂O₃) spherical hematite and TiO₂ coated hematite. No interaction occurred between the selected pigments and the G7 matrix and consequently no new phases were formed in the reported experimental conditions. Coatings on the Foamglas^® substrates were sintered at 560 °C for 1 h and showed different porosity, pigment dispersion in the matrix and colour development, depending on the mixing technique.The porosity was exploited to add TiO₂ coated hematite into the coating, for photo-catalytic purposes. Each coating was deposited without affecting the Foamglas^® substrate porous structure.     

Emphasis on Validation in Research: A Meta-Analysis

The emphasis of validity as a publication content was investigated in dissertations and journal articles. The time of first publication, longitudinal publication profile, ratio of articles to dissertations, and time lag between dissertations and articles emphasizing validity were compared within and among various fields. A three-decade gap separated the first field adopting validity-related contents in its dissertations from the latest fields that did so. The longitudinal data suggested three groups of fields (Agricultural Sciences, Applied Sciences and Social Sciences) which showed consistent differences among groups and consistent similarities within groups in their emphasis on validity-related content. Adoption of validity-related content in dissertations always preceded adoption of validity-related content in journal articles. On average, less than 4% of journal articles included validity-related content across fields. These findings support the hypothesis that validity has been introduced and disseminated within fields following patterns predicted by diffusion of innovations theory. It is argued that this pattern is inconsistent with an efficient and interdisciplinary utilization of available knowledge. Policy recommendations are made for developing strategic communication and education programs for academicians and journal reviewers.     

Numerical investigation of several physical and geometric parameters in the natural convection into trapezoidal cavities

Natural convection in trapezoidal cavities, especially those with two internal baffles in conjunction with an insulated floor, inclined top surface, and isothermal left-heated and isothermal right-cooled vertical walls, has been investigated numerically using the Element based Finite Volume Method (EbFVM). In numerical simulations, the effect of three inclination angles of the upper surface as well as the effect of the Rayleigh number (Ra), the Prandtl number (Pr), and the baffle’s height (H_b) on the stream functions, temperature profiles, and local and average Nusselt numbers has been investigated. A parametric study was performed for a wide range of Ra numbers (10³ ? Ra ? 10⁶) H_b heights (H_b = H¹/3, 2H¹/3, and H¹), Pr numbers (Pr = 0.7, 10 and 130), and top angle (θ) ranges from 10 to 20. A correlation for the average Nusselt number in terms of Pr and Ra numbers, and the inclination of the upper surface of the cavity is proposed for each baffle height investigated.     

Experimental fire analysis of steel‐to‐timber connections using dowels and nails

The paper describes and discusses the results of an extensive testing programme on the structural behaviour of timber connections under ISO‐fire. The results of reference tests performed at normal temperature are also presented. From the variety of timber connections multiple shear steel‐to‐timber connections with dowels and slotted‐in steel plates and connections with steel side plates and annular ringed shank nails were experimentally studied. Particular attention was given to the analysis of the efficiency of different strategies in order to increase the fire resistance of the timber connections. The test results showed that unprotected multiple shear steel‐to‐timber connections with dowels designed for normal temperature reached a fire resistance of about 30 min. A reduction of the load level applied during the fire did not lead to a significant increase of the fire resistance. By increasing the side timber members as well as the end distance of the dowels by 40 mm the connections reached a fire resistance of more than 70 min. Connections protected by timber boards or gypsum plasterboards showed a fire resistance of around 60 min. Thus, from a fire design point of view these strategies were favourable in order to increase the fire resistance of the connections significantly. Unprotected connections with steel side plates and annular ringed shank nails failed already after about 12 min due to large deformations of the nails and the steel side plates directly exposed to fire. By protecting the steel side plates using an intumescent paint the fire resistance of the connections was increased to around 30 min. The test results enlarged the experimental background of timber connections in fire significantly. Copyright © 2009 John Wiley & Sons, Ltd.