On Multirate DS-CDMA Schemes with Interference Cancellation

This paper investigates interference cancellation (IC) in direct-sequence code-division multiple access (DS-CDMA) systems that support multiple data rates. Two methods for implementing multiple data rates are considered. One is the use of mixed modulation and the other is the use of multicodes. We introduce and analyze a new approach that combines these multiple data rate systems with IC. The cancellation in the receiver is performed successively on each user, starting with the user received with the highest power. This procedure can in turn be iterated, forming a multistage scheme, with the number of iterations set as a design parameter. Our analysis employs a Gaussian approximation for the distribution of the interference, and it includes both the AWGN and the flat Rayleigh fading channel. The systems are also evaluated via computer simulations. Our analysis and simulations indicate that the IC schemes used in mixed modulation or multicode systems yield a performance close to the single BPSK user bound and, consequently, give a prospect of a considerable improvement in performance compared to systems employing matched filter detectors.     

Industrial Experience in Pressurized Steam Drying of Beet Pulp,Sewage Sludge and Wood Chips.

ABSTRACT

Drying in superheated steam under pressure gives possibilities for pollution free drying, energy recovery. reduced drying time and a very compact drying equipment.

Products are dried i n a pressurized cellular fluid bed by super heated steam blown through the cells. Above the fluid bed dust is separated before the steam is reheated and recirculated to the cells by a fan. The evaporated water leaves the dryer as usable steam at e.g. 3 bar g, and full energy recovery is obtained. Today 14 plants have been builtor are under construction, with capacities from 2 to 40t / h water evaporation.

This technology is suited for drying of beet pulp, residues from starch production of corn or wheat. sludge. spent grain. brown coal. wood chips and bark.

The technology shows great options for integration in steam systems in various industries, whereby drying is possible without using primary energy and pollution is avoided.     

Reconstructing the Traffic State by Fusion of Heterogeneous Data

Abstract: We present an advanced interpolation method for estimating smooth spatiotemporal profiles for local highway traffic variables such as flow, speed and density. The method is based on the “adaptive smoothing method” which takes as input stationary detector data as typically collected by traffic control centers. We generalize this method to allow for fusion with floating car data or other traffic information. The resulting profiles display transitions between free and congested traffic in great detail, as well as fine structures such as stop‐and‐go waves. We establish the accuracy and robustness of the method and demonstrate three potential applications: (1) compensation for gaps in data caused by detector failure; (2) separation of noise from dynamic traffic information; and (3) the fusion of floating car data with stationary detector data.     

Deceived and distorted: Game outcome retrospectively determines the reported time of action.

Previous work suggested the association between intentionality and the reported time of action was exclusive, with intentionality as the primary facilitator to the mental time compression between the reported time of action and its effect (Haggard, Clark, & Kalogeras, 2002). In three experiments, we examined whether mental time compression could also be observed in an unintended action. Participants performed an externally cued key press task that elicited one of two possible tones. The reported time of action shifted closer to the tone when the tone was used to indicate the winner of a race (Exp.2) compared to when the tone was meaningless and did not indicate winning (Exp.1). This suggests that reported time of an unintended action could shift toward the effect in some contexts. Furthermore, the results from Exp.2 and Exp.3 (tones were substituted with verbal feedback) showed that a presumed winning action was judged to occur earlier whereas a presumed losing action was judged to be later. These findings therefore support the view that the reported time of action is reconstructed from known temporal information rather than determined by intentionality. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Flow conditions of fresh mortar and concrete in different pipes

The variation in fresh concrete flow rate over the pipe cross section was investigated on differently coloured and highly flowable concrete mixes flowing through pipes of different materials (rubber, steel, acryl). First, uncoloured (gray) concrete was poured through the pipe and the pipe blocked. Similar but coloured (black) concrete was then poured into the pipe filled with gray concrete, flowing after the gray concrete for a while before being blocked and hardened. The advance of the colouring along the pipe wall (showing boundary flow rate) was observed on the moulded concrete surface appearing after removing the pipe from the hardened concrete. The shapes of the interfaces between uncoloured and coloured concrete (showing variation of flow rate over the pipe cross section) were observed on sawn surfaces of concrete half cylinders cut along the length axes of the concrete-filled pipe. Flow profiles over the pipe cross section were clearly seen with maximum flow rates near the centre of the pipe and low flow rate at the pipe wall (typically rubber pipe with reference concrete without silica fume and/or stabilizers). More plug-shaped profiles, with long slip layers and less variation of flow rate over the cross section, were also seen (typically in smooth acrylic pipes). Flow rate, amount of concrete sticking to the wall after flow and SEM-images of pipe surface roughness were observed, illustrating the problem of testing full scale pumping.     

Influence of Grain Refinement on Slurry Formation and Surface Segregation in Semi-solid Al-7Si-0.3Mg Castings

This study aims to evaluate the effect of grain refinement on slurry formation and surface segregation in semi-solid castings produced by the Rheometal™ process. The effect of two grain refiners, Al-8B and Al-5Ti-1B, on the slurry α-Al grain size, shape factor and solid fraction was evaluated. The results suggest that the addition of a grain refiner can affect the solid fraction obtained in the Rheometal^TM process and, consequently, reduce the solute content near the casting surface. Grain refiner addition resulted in a larger fraction of α-Al grains ≤ 60 µm for the refined alloys compared with the unrefined alloy. Additionally, the growth of α-Al slurry globules was greater for the unrefined alloy compared with the refined alloy during solidification in the die-cavity. A more homogeneous and finer microstructure was observed near the surface in the grain-refined castings compared with the unrefined castings. Evidence of significant liquid penetration was identified in some α-Al globules, indicating that disintegration of α-Al globules may occur during the Rheometal™ casting process.

     

Trace organic solutes in closed-loop forward osmosis applications: Influence of membrane fouling and modeling of solute build-up

In this study, trace organics transport in closed-loop forward osmosis (FO) systems was assessed. The FO systems considered, consisted of an FO unit and a nanofiltration (NF) or reverse osmosis (RO) unit, with the draw solution circulating between both units. The rejection of trace organics by FO, NF and RO was tested. It was found that the rejection rates of FO were generally comparable with NF and lower than RO rejection rates. To assess the influence of fouling in FO on trace organics rejection, FO membranes were fouled with sodium alginate, bovine serum albumin or by biofilm growth, after which trace organics rejection was tested. A negative influence of fouling on FO rejection was found which was limited in most cases, while it was significant for some compounds such as paracetamol and naproxen, indicating specific compound-foulant interactions. The transport mechanism of trace organics in FO was tested, in order to differentiate between diffusive and convective transport. The concentration of trace organics in the final product water and the build-up of trace organics in the draw solution were modeled assuming the draw solution was reconcentrated by NF/RO and taking into account different transport mechanisms for the FO membrane and different rejection rates by NF/RO. Modeling results showed that if the FO rejection rate is lower than the RO rejection rate (as is the case for most compounds tested), the added value of the FO-RO cycle compared to RO only at steady-state was small for diffusively and negative for convectively transported trace organics. Modeling also showed that trace organics accumulate in the draw solution.     

Die effiziente Organisation

Definition of the problem The hospital as an organization has undergone substantial changes during recent decades due to reforms in the health care system. There have been necessary and quite helpful modifications; however, some modifications raise the question: what public tasks should hospitals fulfill in the future? The following question, thus, arises: what kind of effectiveness, besides cutting costs, should be achieved by the permanent increase of efficiency in hospitals? Paradoxically spoken, the change of the organization hospital seems to be entailed by economization which at the same time is meant to be a remedy for change. Arguments This article reflects on the process of economization from an ethical perspective using patterns from organizational and institutional theory, e.g., a model to evaluate levels of economization contributed by the French sociologist Pierre Bourdieu, applied in this case to German hospitals. Conclusion Market-driven incentives are no answer to the question which goals (i.e., morally, socially, and legally) the health care system should meet. Therefore, public deliberation and performance-orientated shaping of the institutions is required.     

Fears, phobias, and preparedness: Toward an evolved module of fear and fear learning.

An evolved module for fear elicitation and fear learning with 4 characteristics is proposed. (a) The fear module is preferentially activated in aversive contexts by stimuli that are fear relevant in an evolutionary perspective. (b) Its activation to such stimuli is automatic. (c) It is relatively impenetrable to cognitive control. (d) It originates in a dedicated neural circuitry, centered on the amygdala. Evidence supporting these propositions is reviewed from conditioning studies, both in humans and in monkeys; illusory correlation studies; studies using unreportable stimuli; and studies from animal neuroscience. The fear module is assumed to mediate an emotional level of fear learning that is relatively independent and dissociable from cognitive learning of stimulus relationships. (PsycINFO Database Record (c) 2010 APA, all rights reserved)