Synthesis of α‐cellulose/polypyrrole composite for the removal of reactive red dye from aqueous solution: Kinetics and equilibrium modeling

In this work, a composite from α‐cellulose coated with conducting polypyrrole by in situ polymerization using potassium persulfate as oxidant was obtained. The composite was characterized by fourier transform infrared (FTIR) spectroscopy, cyclic voltammetry, UV/Vis spectroscopy, and scanning electron microscopy (SEM) analysis showed homogeneous coating of α‐cellulose with polypyrrole (PPy) to produce a composite with a conductivity of 3.5 × 10⁻⁵ S/m. Batch aqueous adsorption experiments of the reactive red 120 (RR120) dye onto the synthesized material were conducted. The results showed that this composite is an efficient adsorbent for RR120 dye removal. For the adsorption experiments set to an initial pH of 3.9, the adsorption capacity was 15.6 mg of dye/g of composite for an equilibrium concentration (in the liquid) of RR120 dye equal to 1,000 mg/L, whereas a value of 96.1 mg of dye/g of composite was obtained when the solution pH was set to 2.0 for the same equilibrium concentration. When performing adsorption experiments using pure α‐cellulose, dye adsorption was insignificant at any pH value. Adsorption isotherm for RR120 was described by a typical Freundlich model. The transient adsorption of RR120 on the synthesized composite was described by a general three‐resistance model that includes the transport on the film that surrounds the composite particles, diffusion inside the particles, and adsorption on the surface of the particles. A fitting of the uptake curves was performed allowing the estimation of values for the effective diffusivity, D₀, and the adsorption rate coefficient, k₁. For the adsorption experiments with an initial pH value set to 3.9, D₀ was estimated as 1.05 × 10⁻¹⁰ m²/s, whereas k₁ was 1.65 × 10⁻⁴ Lⁿ/g mg^{n − 1} s; the corresponding values of k₁ at pH = 2 and 9.0 were 3.18 × 10⁻⁴ and 5.16 × 10⁻⁵, respectively. POLYM. COMPOS., 36:312–321, 2015. © 2014 Society of Plastics Engineers     

On the deflagration of aluminium/KClO4 mixtures

Explosive properties of KClO₄/Al-mixtures (60/40) were studied using 15 different types of Al powders. The explosions were photographed and the propagation speed was measured. The detonation and detonation isentrope properties of the mixtures were calculated and the results compared to the measured data. A condensed phase detonation was not detected but shock waves were most likely present in the gas phase. The results indicate that aluminium powder is not able to sustain detonation at all. Additionally, powder with a surface area less than 5 m²/g will not even deflagrate reliably as a mixture with potassium perchlorate.     

Design and synthesis of foam glasses from recycled materials

Recycling has emerged as an environmental key point due to the diminishing of natural resources and the generation of ever-increasing amounts of industrial solid wastes. Glass wastes are among the materials that attract great interest in the recycling concept. This work presents the results of foams production from four series of compositions. The first series comprises powders of a sodium-calcium-silicate sheet glass cullet as the main component, an alkali-earth aluminosilicate glass as an additive, and a reagent grade silicon carbide (SiC) powder as gassing agent. In the second series, the glass cullet was used in combination with fly ashes (FLA) as main components, while SiC waste from abrasive paper served as foaming agent. In the third and fourth series, carbonates (calcite and dolomite) were used for foaming powder mixtures composed of sheet glass cullet and FLA, and powdered cathode ray tube panel glasses, respectively. All the processing parameters, including the main components, the nature and content of foaming agents are shown to play a crucial role on the foaming ability and final properties of the glass foams.     

A Comparison of Fresh Frozen vs. Formalin-Fixed,Paraffin-Embedded Specimens of Canine Mammary Tumors via Branched-DNA Assay

Mammary neoplasms are the tumors most affecting female dogs and women. Formalin-fixed, paraffin-embedded (FFPE) tissues are an invaluable source of archived biological material. Fresh frozen (FF) tissue is considered ideal for gene expression analysis. However, strategies based on FFPE material offer several advantages. Branched-DNA assays permit a reliable and fast workflow when analyzing gene expression. The aim of this study was to assess the comparability of the branched-DNA assay when analyzing certain gene expression patterns between FF and FFPE samples in canine mammary tumors. RNA was isolated from 109 FFPE samples and from 93 FF samples of different canine mammary tissues. Sixteen (16) target genes (Tp53; Myc; HMGA1; Pik3ca; Mcl1; MAPK3; FOXO3; PTEN; GATA4; PFDN5; HMGB1; MAPK1; BRCA2; BRCA1; HMGA2; and Her2) were analyzed via branched-DNA assay (b-DNA). ACTB, GAPDH, and HPRT1 were used as data normalizers. Overall, the relative gene expression of the two different origins of samples showed an agreement of 63%. Still, care should be taken, as FFPE specimens showed lower expression of the analyzed targets when compared to FF samples. The fact that the gene expression in FFPE proved to be lower than in FF specimens is likely to have been caused by the effect of storage time. ACTB had the best performance as a data normalizer.     

Characterization of palladium supported on sulfated zirconia catalysts by DRIFTS, XAS and n-butane isomerization reaction in the presence of hydrogen

Palladium supported on sulfated zirconia (PdSZ) has been characterized by the n-butane isomerization reaction in the presence of hydrogen, X-ray absorption spectroscopy (XAS) and diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS) of adsorbed carbon monoxide. Catalyst calcination at 873 K followed by hydrogen reduction at 513 K results in the formation of 30–40 Å Pd metal clusters, but the surface can only weakly adsorb CO, though stronger than Pd-free, sulfated zirconia catalysts. In the presence of hydrogen, PdSZ has a lower n-butane isomerization activity than SZ, and the Pd function cannot stabilize the reaction at low H₂/n-butane ratios.     

Hot corrosion behaviour of 7YSZ + Gd2O3 nano-composites in molten salts prepared by spark plasma sintering

This study compares the hot corrosion performance of yttria-stabilised zirconia (7YSZ), and 7YSZ?+?Gd₂O₃ composite samples in the presence of molten mixture of Na₂SO₄?+?V₂O₅ at 1150°C. For 7YSZ, the reaction between NaVO₃ and Y₂O₃ produces YVO₄ and leads the transformation of tetragonal ZrO₂ to monoclinic ZrO₂. A high-density in sintered 7YSZ?+?Gd₂O₃ samples, led minor amounts of monoclinic ZrO₂ and tetragonal GdVO₄ as the hot corrosion products with only traceable amounts of YVO₄, and a stable corroded layer was formed. Due to the synergic effect of doping of zirconia with Gd₂O₃, the 7YSZ?+?Gd₂O₃ sample has a much better hot corrosion crack resistance than 7YSZ.     

Derivation and validation of a binary multi-fluid Eulerian model for fluidized beds

The paper presents a multi-fluid Eulerian model derived from binary kinetic theory of granular flows, free path theory and an empirical friction theory. The effects of the inter- and inner-particle collisions, particle translational motions and particle–particle friction are included. As the effects due to fluiddynamic particle velocity differences and particle–particle friction are considered, some unconventional terms are produced compared with the previous models. Model validation using the data from Mathiesen et al. (2000) shows that the coupling terms give a stronger and more realistic particle–particle coupling because the effects due to the fluiddynamic velocity differences are considered. The model gives reasonable predictions of the particle volume fraction, particle velocities and velocity fluctuations. The model analysis reveals that the basic particle velocity fluctuations constitute 2 terms: the velocity fluctuations of the discrete particles, and the velocity fluctuations of the continuous fluid flow. Furthermore, the simulation results show that the velocity fluctuations of the continuous fluid flow are dominant in a binary riser flow.     

A Fluorometric Enzymatic Assay for Quantification of Steryl Glucosides in Biodiesel

Steryl glucosides (SG) are common contaminants in biodiesel that form precipitates, which form and cause problems due to fouling during transport and storage. Therefore, their quantification is necessary to assess the quality of this fuel. The methods currently available for SG analysis require expensive instrumentation, need a previous concentration step by solid‐phase extraction (SPE) or are of limited use for the quantitative assessment. We developed an enzymatic method for SG quantification in biodiesel samples based on the hydrolysis of the glucoside catalyzed by a broadly specific beta glucosidase and the subsequent determination of the glucose released by the reaction. The method is non‐expensive, sensitive and was adapted to 96‐well format fluorescence plate reader, making it useful for the parallel assay of multiple samples. The enzymatic assay presented here represent a valuable tool for both quality control and the development of improved biodiesel production and purification procedures.     

Effects of Milling Liquid on the Reaction-Bonded Aluminum Oxide Process

The reaction-bonded aluminum oxide process begins with aluminum, Al₂O₃, and usually ZrO₂ powders that have been attrition-milled in an organic liquid. The attrition-milled powder is then compacted and heat-treated in air to produce polycrystalline, Al₂O₃-based ceramics. Safety considerations have made it desirable for the milling liquid to be changed from acetone to a less-flammable solvent. In this paper, mineral spirits, ethanol, and mineral spirits that contains 2 wt% stearic acid are presented as viable alternatives to acetone. The effects of changing the milling liquid on the reaction process and the properties of the final fired ceramic are investigated.     

Matisse: A System-on-Chip Design Methodology Emphasizing Dynamic Memory Management

MATISSE is a design environment intended for developing systems characterized by a tight interaction between control and data-flow behavior, intensive data storage and transfer, and stringent real-time requirements. Matisse bridges the gap from a system specification, using a concurrent object-oriented language, to an optimized embedded single-chip hardware/software implementation. Matisse supports stepwise exploration and refinement of dynamic memory management, memory architecture exploration, and gradual incorporation of timing constraints before going to traditional tools for hardware synthesis, software compilation, and inter-processor communication synthesis. With this approach, specifications of embedded systems can be written in a high-level programming language using data abstraction. Application of MATISSE on telecom protocol processing systems in the ATM area shows significant improvements in area usage and power consumption.