Photothermal Interferometric Aerosol Absorption Spectrometry

Aerosol light absorption still remains a difficult quantity to measure at the precision, accuracy and temporal resolution necessary to quantitatively bound the contribution of this direct effect on aerosol radiative forcing. These continuing difficulties are due, in part, because aerosol extinction is dominated by light scattering. In response to these and other issues, the aerosol community has been developing a new generation of instrumentation that can measure aerosol absorption without the need to deposit aerosols on a filter. Here we introduce work on the application of photothermal interferometry (PTI) towards this measurement problem. The advantages of this approach are: its complete insensitivity to aerosol scattering (true for any photothermal technique) and high sensitivity resulting from use of an interferometric technique. Using NO₂ as a calibration standard, the accuracy of the PTI technique was measured to be 5% (95% confidence interval). Measurement at a 10-second time constant yields a precision of 0.2 Mm^?1 (95% confidence interval) and a lower limit of detection of 0.4 Mm^?1 for a sample pathlength of 5 cm. Using laboratory-generated nigrosin aerosols an intercomparison between the PTI and a 3-λ Particle Soot Absorption Photometer (PSAP) gives a slope of 0.96 ± 0.02. Acquisition of absorption coefficients for ambient aerosols reveals very good agreement between the two instruments except for periods of high relative humidity (>70%) whereupon the PSAP reports a larger absorption coefficient.     

Morphological and Elemental Classification of Freshly Emitted Soot Particles and Atmospheric Ultrafine Particles using the TEM/EDS

The Transmission Electron Microscopy (TEM) and Energy Dispersive Spectroscopy (EDS) were used to determine morphology and elemental composition of a variety of freshly emitted soot particles (acetylene flame, candle flame, kerosene flame, diesel exhaust, electric arc, plastic burning, styrofoam burning, wood burning [white oak and pine bark], and rice straw burning), which can be possible candidate soot in the ambient atmosphere, and ultrafine particles sampled in urban, industrial, and coastal sites during ultrafine particle formation events (combustion and photochemical events). By using mobility-classified non-refractory ((NH ₄ ) ₂ SO ₄ ) and refractory (Polystyrene latex (PSL) and salt (NaCl)) particles, limitation of the TEM was tested. Data showed that the TEM method can be used to examine shapes of both volatile particles such as (NH ₄ ) ₂ SO ₄ (100 nm) at low, but not high magnification (refer to low and high beam intensity, respectively), and non-volatile particles like NaCl (100 nm) and PSL (84 nm) at either low or high magnification. Distinct differences in morphological properties such as primary particle diameter, fractal dimension, and microstructure were observed among the different types of fresh soot particles. The atmospheric ultrafine particles were classified as agglomerates, sulfate mixtures (spherical), metallic oxides (spherical and polygonal), C-rich refractory (not agglomerated), C-rich non-refractory (not agglomerated), Si-rich (spherical), Na-rich (porous), or P-containing (non-spherical) particles. At the urban Gwangju site, a higher fraction of fresh and aged agglomerates was observed than at other sites. The C-rich non-refractory and sulfate mixtures were often observed in the photochemical event. The C-rich refractory particles were abundant at the Gwangju and Yeosu sites. The coastal Taean site had few agglomerates due to limited anthropogenic combustion source.     

Comparison of the Chemical and Oxidative Characteristics of Particulate Matter (PM) Collected by Different Methods: Filters,Impactors, and BioSamplers

In this study, we compare the chemical and oxidative characteristics of concentration-enriched PM_2.5 samples simultaneously collected by a filter, a Nano-Micro-Orifice Uniform Deposition Impactor, and a BioSampler. Gravimetric measurements showed considerable agreement in particulate matter (PM) collection efficiency for all three samplers. Accordingly, samples from the three collectors exhibited similar chemical compositions. The mass fractions of their inorganic ions, labile and nonlabile, were comparable. Moreover, the organic carbon (OC) content of the BioSampler slurry was similar to that of the filter, while water-soluble OC levels of the filter and impactor samples were close to a 100% agreement. Lastly, linear regression analyses demonstrated that the water-soluble elements existed in similar proportions for the filter and impactor samples. Their respective total components were also in very good agreement. By contrast, the recoverable elements from the BioSampler slurry, determined by high-resolution magnetic sector inductively coupled plasma mass spectrometry, were in good agreement with the water-soluble elements of the filter and impactor samples but not their corresponding total components. In spite of the overall agreement among the samples on their chemical composition, findings from a macrophage reactive oxygen species (ROS), a dithiothreitol (DTT), and a dihydroxybenzoate (DHBA) assay revealed that the oxidative potential of aqueous extracts of the filter and impactor substrates was similar yet substantially lower than that of the BioSampler slurry. However, filtering of the BioSampler slurry, i.e., removal of insoluble PM components, attenuated its ROS activity to about the same level as that of the water extracts of the filter and impactor samples. These findings first indicate that insoluble PM species are potentially redox active, and second that particle collection by the BioSampler, which circumvents the need for PM extraction, constitutes a viable alternative for collecting concentrated particles for characterization of the oxidative properties of PM.     

Brightness Reversion of Mechanical Pulps Part XIII: Photoinduced Degradation of Lignin on Cellulose Matrix

Abstract

An acidic dioxane extraction procedure was employed to isolate lignin from softwood bleached chemithermomechanical pulp (BCTMP). The isolated lignin was characterized spectroscopically and applied on cellulose test sheets. The treated cellulose test sheets were shown to exhibit photoyellowing properties comparable to those of BCTMP. The photolyzed lignin was re-isolated and characterized using spectroscopic techniques. UV-VIS and FT-IR studies implied elimination of the guaiacyl structure of lignin and the formation of carboxyl and/or unconjugated carbonyl groups during the photoyellowing process. The steady-state emission intensity of the excited states of guaiacyl structures decreased with increasing photolysis time, suggesting the formation of quinones during photolysis. NMR spectroscopic analysis of the photolyzed lignin indicated that the formyl, methoxyl, and uncondensed phenolics decreased in concentration as the irradiation proceeds. In contrast, condensed lignin and carboxylic acids increased as photolysis time was increased. These results are explained within the mechanism of lignin photodegradation.     

The Identification of Cyclopenta-Fused and Ethynyl-Substituted Polycyclic Aromatic Hydrocarbons in Benzene Droplet Combustion Products

In order to investigate new aspects of polycyclic aromatic hydrocarbon (PAH) growth and soot formation, we have synthesized special reference standards of cyclopenta-fused PAH (CP-PAH) and ethynyl-substituted PAH. We have identified several of these CP-PAH and ethynyl-PAH in benzene droplet combustion products, using high pressure liquid chromatography (HPLC) and ultraviolet-visible (UV) absorption spectroscopy. Although one CP-PAH identified in these products - acenaphthylene - has previously been identified as a product of a variety of combustion systems, we have identified six additional CP-PAH and two ethynyl-PAH which have never before been unequivocally identified as the products of benzene pyrolysis or combustion: acephenanthrylene, aceanthrylene, cyclopent[hi]acephenanthrylene, cyclopenta[cd]fluoranthene, cyclopenta[cd] pyrene, dicyclopenta[cd, jk]pyrene, 2-ethynylnaphthalene, and 1-ethynylacenaphthylene. We present the corresponding UV absorption spectra obtained from the HPLC analysis of benzene droplet combustion products, and compare them to the UV absorption     

Thermodynamic Modeling of the MgO–Al2O3–CrO–Cr2O3 System

A complete critical evaluation and thermodynamic modeling of the phase diagrams and thermodynamic properties of the MgO–Al₂O₃–CrO–Cr₂O₃ system at 1 bar total pressure are presented. Optimized equations for the thermodynamic properties of all phases are obtained which reproduce all available thermodynamic and phase equilibrium data within experimental error limits from 25°C to above the liquidus temperatures at all compositions and oxygen partial pressures. The optimized thermodynamic properties and phase diagrams are believed to be the best estimates presently available. The database of the model parameters can be used along with software for Gibbs energy minimization in order to calculate any type of phase diagram section.     

Regulation of Trafficking and Signaling of the High Affinity IgE Receptor by FcεRIβ and the Potential Impact of FcεRIβ Splicing in Allergic Inflammation

Mast cells are tissue-resident immune cells that function in both innate and adaptive immunity through the release of both preformed granule-stored mediators, and newly generated proinflammatory mediators that contribute to the generation of both the early and late phases of the allergic inflammatory response. Although mast cells can be activated by a vast array of mediators to contribute to homeostasis and pathophysiology in diverse settings and contexts, in this review, we will focus on the canonical setting of IgE-mediated activation and allergic inflammation. IgE-dependent activation of mast cells occurs through the high affinity IgE receptor, FcεRI, which is a multimeric receptor complex that, once crosslinked by antigen, triggers a cascade of signaling to generate a robust response in mast cells. Here, we discuss FcεRI structure and function, and describe established and emerging roles of the β subunit of FcεRI (FcεRIβ) in regulating mast cell function and FcεRI trafficking and signaling. We discuss current approaches to target IgE and FcεRI signaling and emerging approaches that could target FcεRIβ specifically. We examine how alternative splicing of FcεRIβ alters protein function and how manipulation of splicing could be employed as a therapeutic approach. Targeting FcεRI directly and/or IgE binding to FcεRI are promising approaches to therapeutics for allergic inflammation. The characteristic role of FcεRIβ in both trafficking and signaling of the FcεRI receptor complex, the specificity to IgE-mediated activation pathways, and the preferential expression in mast cells and basophils, makes FcεRIβ an excellent, but challenging, candidate for therapeutic strategies in allergy and asthma, if targeting can be realized.     

Influence of the microstructure of gums on the mechanical properties of silicone high consistency rubbers

This paper is devoted to the characterization and processing of high molar mass vinyl‐bearing polysiloxanes in high consistency silicone rubber (HCR) formulations. The molar masses of five different polydimethylsiloxane gums, bearing vinyl groups at the ends and along their chains, were evaluated by size exclusion chromatography and rheometry. ²⁹Si and ¹H NMR spectroscopy allowed the precise determination of the vinyl content and of the distribution in the different polymers. Typical HCRs formulated from these gums were heat‐cured to process silicone rubber materials that were then tested mechanically. The macromolecular properties were correlated to the final material network structure. The amount of reactive vinyl moieties, rather than their distribution along or at the end of chains, is a key parameter to tailor the material mechanical properties. © 2016 Society of Chemical Industry     

Synthesis and properties of aminopropyl nucleic acids

Oligonucleotides that contain up to three aminopropyl nucleoside analogues have been synthesized. Dimers of aminopropyl adenine and thymidine were prepared and used as building blocks by applying phosphoramidite chemistry. Both R and S isomers of the aminopropyl nucleosides were used. This incorporation led to a reduction of thermal stability of double-stranded DNA. Furthermore, the (R)-adenine analogue, which yielded (S)-APNA, can be considered as a candidate for universal base pairing.     

Hydride Formation in Zirconium Alloys

The ingress of hydrogen during corrosion in service can degrade the mechanical properties of zirconium alloy nuclear fuel cladding because of the formation of brittle hydrides. The formation of these hydrides is reviewed in light of recent synchrotron radiation experimental results and phase-field modeling computational results that provide new insight on the process.