New and conventional pore size tests in virus-removing membranes

Microorganisms are retained by ultrafiltration (UF) membranes mainly due to size exclusion. The sizes of viruses and membrane pores are close to each other and retention of viruses can be guaranteed only if the precise pore diameter is known. Unfortunately and rather surprisingly, there is no direct method to determine the membrane pore size. As a result, the UF membranes are not trusted to remove the viruses, and the treatment plants are required to enhance viral disinfection.Here we propose a new, simple and effective method for UF pore size determination using aquasols of gold and silver nanoparticles. We synthesized highly monodispersed suspensions ranging in diameter from 3 to 50 nm, which were later transferred through polymer and ceramic UF membranes. The retention percentage was plotted against the particle diameter to determine the pore size for which a membrane has a retention capability of 50, 90 and 100%. The d₅₀, d₉₀ and d₁₀₀ values were compared with data obtained from conventional transmembrane flux, polyethylene glycol, and dextran tests, and with the retention of phi X 174 and MS2 bacteriophages.The absolute pore size, d₁₀₀, for the majority of tested UF membranes is within 40-50 nm, and can only be detected with the new tests. The average 1.2 log retention of hydrophilic phi X 174 was predicted accurately by models based on the virus hydrodynamic radii and d₁₀₀ pore size. The 2.5 log MS2 retention suggests hydrophobic interactions in addition to simple ball-through-cylinder geometry.     

Combining static and dynamic array detection for binary synthesis with multiple memory ports

In High-Level Synthesis, Binary Synthesis is a method for synthesizing compiled applications for which the source code is not available. One of the advantages of FPGAs over processors is the availability of multiple internal and external memory banks. Binary synthesis tools use multiple memory banks if they are able to recover data-structures from the binary. In this work we improve the recovery of data-structures by introducing dynamic memory analysis and combining it with improved static memory analysis. We show that many applications can only be synthesized using dynamic memory analysis. We present two FPGA based architectures for implementing the bound-checking and recovery for the synthesized code. Our experiments show that the proposed technique accelerates the execution of applications which use multiple memory banks concurrently. We demonstrate that many binary applications indeed benefit from this technique.     

Capacity commitment and price volatility in a competitive electricity market

The long lead time required to add new capacity in the electricity generation industry means that daily demands are necessarily served by capacity already installed. However, in a competitive market, even if the installed capacity was designed to serve the projected demands, frequent surpluses and occasional full utilization inevitably lead to price volatility. This paper develops a two-stage model of the generation market in which capacity construction occurs in stage 1, before demand realization, and price determination occurs in stage 2, when the equilibrium price ensures that the realized demand does not exceed the installed capacity. We show that price volatility and price spikes are inevitable, and that while price capping can mitigate high and volatile prices, it causes unmet demands and reduction in system reliability. This paper accentuates the interdependence among generating capacity, price volatility and service reliability, a primary cause of concern in the debate on electricity market reform.     

Applications of dense media radiative transfer theory for passivemicrowave remote sensing of foam covered ocean

The effect of the foam covered ocean surface on the passive microwave remote sensing measurements is studied based on the electromagnetic scattering theory. In formulating an electromagnetic scattering model, the authors treat the foam as densely packed sticky air bubbles coated with thin seawater coating. The layer of foam covers the ocean surface that has air bubbles. They then use dense media radiative transfer (DMRT) theory with quasi-crystalline approximation (QCA) for densely distributed sticky moderate size particles to calculate the brightness temperatures of the foam-covered ocean surface. Results are illustrated for 19 GHz and 37 GHz and for both vertical and horizontal polarizations as a function of foam microstructure properties and foam layer thickness. Comparisons are also made with experimental measurements     

Dependence of carrier lifetime on Cu-contacting temperature and ZnTe:Cu thickness in CdS/CdTe thin film solar cells

Cu diffusion from a ZnTe:Cu contact interface can increase the net acceptor concentration in the CdTe layer of a CdS/CdTe photovoltaic solar cell. This reduces the space-charge width (W_d) of the junction and enhances current collection and open-circuit voltage. Here we study the effect of Cu concentration in the CdTe layer on carrier lifetime (τ) using time-resolved photoluminescence measurements of ZnTe:Cu/Ti-contacted CdTe devices. Measurements show that if the ZnTe:Cu layer thickness remains constant and contact temperature is varied, τ increases significantly above its as-deposited value when the contacting temperature is in a range that has been shown to yield high-performance devices (~ 280° to ~ 320 °C). However, when the contacting temperature is maintained near an optimum value and the ZnTe:Cu thickness is varied, τ decreases with ZnTe:Cu thickness.     

Electric power generation using a parallel‐plate capacitor

In this study, we propose an efficient design for a portable energy generator using a parallel‐plate capacitor. Analytical calculations show that if charge (Q) is kept constant and dielectric subsequently removed from the capacitor, then electrostatic energy increases by a factor of ε_r (permittivity). Initially, a priming charge must be loaded onto the capacitors that are subsequently disconnected from the voltage source. A significant mechanical nonlinear force is needed to remove the dielectric slab. In the proposed configuration, dielectric constitutes the rotor of generator and is located between two pairs of conducting disks, which constitute the stator. The rotor is divided into four dielectric sectors at 60° spacing whereas the stator is divided into six conducting sectors at 30° spacing. In each cycle, two dielectric slabs go inside the capacitor and two other come outside. This specific geometrical arrangement diminishes the extent of mechanical forces and helps to enhance the efficiency of generator significantly. Additionally, this work also relates to generating large amplitude of voltage that can be used as a high voltage source.     

Tests of a temporal theory of attentional binding.

Different features of stimuli present in the field of view appear to be registered in different cortical maps. How, then, are the features that come from the same object bound together rather than mistakenly assembled with features coming from other simultaneously present objects? One theory supposes that an attentional mechanism intercepts input coming from particular retinal locations at a way station prior to parsing of the features from the same object. Any enhancement (or facilitation) at that stage will cause all the features from that object to be modified simultaneously in the downstream registers. The imposed temporal synchronicity serves as the essential binding cue. Five experiments provided no support for the theory. There is no tendency for synchronicity of features to cause binding unless the features come from the same location. Location, rather than temporal synchronicity, appears to be the essential cue for binding. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Succession of mutations in the Sabin strain of type 3 poliovirus replicating in the central nervous system of monkeys

Pentachlorophenol (PCP), which has been used as a wood preservative, was reported to be a liver carcinogen in mice. To investigate the initial effects of PCP administration under the same conditions of exposure as in the carcinogenic study, we examined oxidative stress and cell proliferation, along with other hepatotoxicological parameters, in the livers of B6C3F1 mice fed PCP in their diet at doses of 0.03, 0.06, and 0.12% for up to 4 weeks. We observed significant increases of 8-OHdG levels in hepatic nuclear DNA at doses of 0.03% and above at 2 and 4 weeks. Likewise, dose-dependent increases in the labeling index of cells were detected by counting those that had incorporated 5-bromo-2'-deoxyuridine throughout the experimental period. Also, we found significant elevations of the liver weights, concurrent with increases in hepatic DNA content in the treated mice, which again were dose-related. Serum aspartic transferase activity at doses of 0.06% and above were significantly increased despite these changes being slight. Also, histopathological examination provided no evidence of necrotic changes, but severe hepatocyte swelling in the treated mouse livers. These data indicate that PCP might be able to induce cell proliferation in the mouse liver, as well as induce oxidative DNA damage, suggesting both changes may play an important role in hepatocarcinogenesis.