Modeling and Control of a Titania Aerosol Reactor

We focus on modeling and control of an aerosol flow reactor used to produce titania powder. We initially present a detailed population balance model for the process which accounts for simultaneous nucleation, Brownian and shearinduced coagulation, and convective transport and describe the spatio-temporal evolution of the aerosol volume distribution. Then, under the assumption of lognormal aerosol volume distribution, the method of moments is employed for the derivation of a model that describes the evolution of the three leading moments of the volume distribution. The moment model, together with the fundamental model that describes the temperature in the reactor and concentrations of the gas-phase species, are subsequently used to synthesize a nonlinear output feedback controller which manipulates the temperature of the reactor wall to achieve an aerosol size distribution in the outlet of the reactor with desired geometric average particle diameter. The nonlinear controller is successfully implemented on the process model and is shown to deal effectively with external disturbances.     

Nanoscale surface modifications to control capillary flow characteristics in PMMA microfluidic devices

Polymethylmethacrylate (PMMA) microfluidic devices have been fabricated using a hot embossing technique to incorporate micro-pillar features on the bottom wall of the device which when combined with either a plasma treatment or the coating of a diamond-like carbon (DLC) film presents a range of surface modification profiles. Experimental results presented in detail the surface modifications in the form of distinct changes in the static water contact angle across a range from 44.3 to 81.2 when compared to pristine PMMA surfaces. Additionally, capillary flow of water (dyed to aid visualization) through the microfluidic devices was recorded and analyzed to provide comparison data between filling time of a microfluidic chamber and surface modification characteristics, including the effects of surface energy and surface roughness on the microfluidic flow. We have experimentally demonstrated that fluid flow and thus filling time for the microfluidic device was significantly faster for the device with surface modifications that resulted in a lower static contact angle, and also that the incorporation of micro-pillars into a fluidic device increases the filling time when compared to comparative devices.     

Transport in deformable food materials: A poromechanics approach

A comprehensive poromechanics-based modeling framework that can be used to model transport and deformation in food materials under a variety of processing conditions and states (rubbery or glassy) has been developed. Simplifications to the model equations have been developed, based on driving forces for deformation (moisture change and gas pressure development) and on the state of food material for transport. The framework is applied to two completely different food processes (contact heating of hamburger patties and drying of potatoes). The modeling framework is implemented using total Lagrangian mesh for solid momentum balance and Eulerian mesh for transport equations, and validated using experimental data. Transport in liquid phase dominates for both the processes, with hamburger patty shrinking with moisture loss for all moisture contents, while shrinkage in potato stops below a critical moisture content.     

On the issue of urea phase connectivity in formulations based on molded flexible polyurethane foams

Lithium chloride was added to systematically alter the phase separation behavior, and hence, the nature of urea phase connectivity, in a series of plaques based on molded flexible polyurethane foam formulations. The plaques prepared were found to possess varied levels of urea phase connectivity that was examined at different length scales using several characterization techniques. SAXS, TEM, and t‐AFM were used to show that addition of LiCl systematically reduced the formation of the urea aggregate structures typically observed in flexible polyurethane foam formulations and thus led to a loss in urea phase connectivity at the macrolevel. SAXS, DSC, and DMA revealed that formulations with and without LiCl exhibited similar interdomain spacings and soft segment glass transitions, suggesting that incorporation of LiCl did not prevent the plaques from undergoing partial microphase separation. WAXS demonstrated that addition of LiCl led to a loss in the local ordering of the hard segments within the microdomains, i.e., it led to a reduction of microlevel connectivity or the regularity in segmental packing of the urea phase. High‐magnification t‐AFM images showed that increasing the LiCl content dispersed the urea component more homogeneously and in a more uniform manner in the polyol matrix, and thus altered the connectivity of the urea phase at the microdomain level. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2956–2967, 2002     

用椰壳制活性炭吸附去除三价铋离子(英文)

In present study,we report the preparation of coconut shell activated carbon as adsorbent and its appli-cation for Bi(Ⅲ) removal from aqueous solutions.The developed adsorbent was characterized with scanning elec-tron microscope(SEM),Fourier Transform Infrared(FTIR),C,H,N,S analyzer,and BET surface area analyzer.The parameters examined include agitation time,initial concentration of Bi(Ⅲ),adsorbent dose and temperature.The maximum adsorption of Bi(Ⅲ)(98.72%) was observed at 250 mg·L-1 of Bi(Ⅲ) and adsorbent dose of 0.7 g when agitation was at 160 r·min-1 for 240 min at(299±2) K.The thermodynamic parameters such as Gibb’s free energy(△Gθ),enthalpy(△Hθ) and entropy(△Sθ) were evaluated.For the isotherm models applied to adsorption study,the Langmuir isotherm model fits better than the Freundlich isotherm.The maximum adsorption capacity from the Langmuir isotherm was 54.35 mg?g?1 of Bi(Ⅲ).The kinetic study of the adsorption shows that the pseudo second order model is more appropriate than the pseudo first order model.The result shows that,coconut shell ac-tivated carbon is an effective adsorbent to remove Bi(Ⅲ) from aqueous solutions with good adsorption capacity.     

Tailoring Encodable Lanthanide‐Binding Tags as MRI Contrast Agents

Lanthanide‐binding tags (LBTs), peptide‐based coexpression tags with high affinity for lanthanide ions, have previously been applied as luminescent probes to provide phasing for structure determination in X‐ray crystallography and to provide restraints for structural refinement and distance information in NMR. The native affinity of LBTs for Gd³⁺ indicates their potential as the basis for engineering of peptide‐based MRI agents. However, the lanthanide coordination state that enhances luminescence and affords tightest binding would not be ideal for applications of LBTs as contrast agents, due to the exclusion of water from the inner coordination sphere. Herein, we use structurally defined LBTs as the starting point for re‐engineering the first coordination shell of the lanthanide ion to provide for high contrast through direct coordination of water to Gd³⁺ (resulting in the single LBT peptide, m‐sLBT). The effectiveness of LBTs as MRI contrast agents was examined in vitro through measurement of binding affinity and proton relaxivity. For imaging applications that require targeted observation, fusion to specific protein partners is desirable. However, a fusion protein comprising a concatenated double LBT (dLBT) as an N‐terminal tag for the model protein ubiquitin had reduced relaxivity compared with the free dLBT peptide. This limitation was overcome by the use of a construct based on the m‐sLBT sequence (q‐dLBT–ubiquitin). The structural basis for the enhanced contrast was examined by comparison of the X‐ray crystal structure of xq‐dLBT–ubiquitin (wherein two tryptophan residues are replaced with serine), to that of dLBT‐ubiquitin. The structure shows that the backbone conformational dynamics of the MRI variant may allow enhanced water exchange. This engineered LBT represents a first step in expanding the current base of specificity‐targeted agents available.     

Spectroscopic and Simulation Analysis of Facile PEDOT:PSS Layer Deposition-Silicon for Perovskite Solar Cell

In this research work, we have characterized and simulated a well-known hole transport material (HTM) for perovskite solar cell (PSC) and conductive polyme     

TFET on Selective Buried Oxide (SELBOX) Substrate with Improved ION/IOFF Ratio and Reduced Ambipolar Current

Silicon - This paper proposes a new structure for tunnel field effect transistor on a selective buried oxide (SELBOX) substrate. An extensive simulation study and a comparative performance analysis...     

Inhibitive effect of diethylcarbamazine on the corrosion of mild steel in hydrochloric acid

Potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), weight loss measurements and atomic force microscopy techniques were used to investigate the inhibitory effect of diethylcarbamazine (DECM) on corrosion of mild steel in HCl solution. The inhibitor showed >90% inhibition efficiency at 5.01 × 10⁻⁴ M. Results obtained revealed that inhibition occurs through adsorption of inhibitor molecules on metal surface without modifying the mechanism of corrosion process. Potentiodynamic polarization studies suggested that it is a mixed type inhibitor, predominantly controls cathodic reaction. Activation parameters (E_a, ΔH and ΔS) and thermodynamic parameters (, and ) were calculated to investigate mechanism of inhibition.     

Supported binary oxide monolayers as selective oxidation catalysts: Bi2Mo3O12/TiO2

Monolayers of bismuth molybdates supported on low-area TiO₂ (anatase) catalyse the oxidation/isomerisation of 1-butene to butadiene and 2-butenes with combined selectivities of 80–100% and show significantly lower specific rates of deep oxidation than does -Bi₂Mo₃O₁₂. As loadings are increased above 2 wt% (equivalent to one monolayer), selectivities remain high and, although the butadiene yields are generally only moderate, in some cases they exceed that shown by the unsupported -phase. This revised version was published online in July 2006 with corrections to the Cover Date.