Morphology,thermomechanical properties,and biodegradability of low density polyethylene/starch blends

The biodegradability of low density polyethylene (LDPE)/starch and LDPE/starch/starch acetate (STAc) blends was tested and observed to be dependent on STAc content. The binary and ternary blends containing up to a maximum concentration of 30% starch were examined for their thermal, mechanical, and morphological properties. The blends with no STAc or 2.5% STAc show almost no adherence of two phases. With 10% STAc, dispersion of starch was observed to increase with some adherence to LDPE. Tensile strength, elongation at break, and Izod impact strength of the blends decreased with increased starch content. However, incorporation of STAc along with starch improved all these properties, particularly elongation at break and toughness. The melt flow index was also improved on partial substitution of starch by STAc. Maximum biodegradability was observed for the blends containing 30% (starch + STAc). Cell growth was observed to increase with increasing concentration of (starch + STAc) in the blends. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2791–2802, 1999     

Active coke: Carbonaceous materials as catalysts for alkane dehydrogenation

The catalytic dehydrogenation (DH) and oxidative dehydrogenation (ODH) of light alkanes are of significant industrial importance. In this work both carbonaceous material deposited on VO_x/Al₂O₃ catalysts during reaction and unsupported carbon nanofibres (CNFs) are shown to be active for the dehydrogenation of butane in the absence of gas-phase oxygen. Their activity in these reactions is shown to be dependent upon their structure, with different reaction temperatures yielding structurally different coke deposits. Terahertz time-domain spectroscopy (THz-TDS), among other techniques, has been applied to the characterisation of these deposits – the first time this technique has been employed in coke studies. TEM and other techniques show that coke encapsulates the catalyst, preventing access to VO_x sites, without a loss of activity. Studies on CNFs confirm that carbonaceous materials act as catalysts in this reaction. Carbon-based catalysts represent an important new class of potential catalysts for DH and ODH reactions.     

In Situ Confocal Raman Mapping Study of a Single Ti-Assisted ZnO Nanowire

In this work, we succeeded in preparing in-plane zinc oxide nanowires using a Ti-grid assisted by the chemical vapor deposition method. Optical spatial mapping of the Confocal Raman spectra was used to investigate the phonon and geometric properties of a single ZnO nanowire. The local optical results reveal a red shift in the non-polar E₂ high frequency mode and width broadening along the growth direction, reflecting quantum-confinement in the radial direction.     

Multi-objective optimization of industrial styrene reactor: Adiabatic and pseudo-isothermal operation

Multi-objective differential evolution (MODE) is used to optimize an industrial styrene reactor considering productivity, selectivity and yield as the main objectives. Two reactor configurations (single bed adiabatic operation and steam injected pseudo-isothermal operation) and four combinations of objectives consisting of 5 and 7 variables respectively are considered. Pareto optimal solutions are obtained for all combinations of objective functions for both the configurations. The results are compared with those reported in the literature and an industrial operating point. For all the cases considered, MODE is able to give a Pareto front better (in terms of wider range and a better spread) than that obtained using NSGA for both the configurations. Steam injected reactor configuration is better than the adiabatic reactor configuration in terms of performance. The Pareto optimal solutions obtained from such studies provide a wide range of optimal operating conditions from which an appropriate operating point can be selected based on the requirements of the decision maker.     

Synthesis and anion-sensing property of a family of Ru(II)-based receptors containing functionalized polypyridine as binding site

A family of fluoroionophores have been synthesized incorporating Ru(II)-bipyridine moiety as fluorogenic unit and amino/benzenesulphonamido functionalized 1,10-phenanthroline moiety, attached to Ru(II), as binding sites. Two of the ligands and one of the complexes have been characterized crystallographically. Anion recognition property, studied by luminescence, UV–vis and ¹H NMR spectroscopy, with a large number of anions exhibit strong complexation with F^?, H₂PO₄^? and AcO^?. Binding constants have been determined from luminescence titration and ¹H NMR study gave insight about binding site of anions. Bidentate chelating nature of the H₂PO₄^? and AcO^? anions and steric crowding created by benzenesulphonamide moiety has significantly influenced binding constants and selectivity.     

Fatty acid modified polyurethane dispersion for surface coatings: Effect of fatty acid content and ionic content

The higher molecular weight fatty acid modified polyurethane–urea dispersions (PUDs) were prepared with effective utilization of fatty acid and ionic emulsifier. The PUDs were prepared using oligomer of linoleic fatty acid, dimethylol propionic acid (DMPA), linear polyester diol, isophorone diisocyanate (IPDI), triethylamine (TEA) and ethylenediamine (EDA) by prepolymer mixing method. Resultant PUDs had so-called controlled branched polymer structures. To incorporate fatty acid residues in the backbone of the polyurethane two types of oligomers were used which were synthesized by esterifying linoleic acid and phthalic anhydride (PA) with different monomers having different hydroxyl functionality i.e. trimethylol propane (TMP), pentaerythritol and neopentyl glycol (NPG). The oligomers were mixed with linear polyester diol in different proportions and used as polyol part in prepolymer for PUDs. Various compositional variations such as type of oligomer, content of oligomer and ionic emulsifier were studied for stability and compatibility with water. The PUDs were also examined by FTIR, AFM, GPC, particle size analyzer, viscometer, TGA, DMA and tensile tester to analyze structures and properties. Chemical, water and corrosion resistances of the dried films were also evaluated to study the effect of oligomer content in modified PUDs. These properties are found to be significantly affected by the content and type of oligomer as well as ionic content in the polymer.     

Casting/mould interfacial heat transfer during solidification in graphite,steel and graphite lined steel moulds

Heat flow between the casting and the mould during solidification of three commercially pure metals, in graphite, steel and graphite lined steel moulds, was assessed using an inverse modelling technique. The analysis yielded the interfacial heat flux (q), heat transfer coefficient (h) and the surface temperatures of the casting and the mould during solidification of the casting. The peak heat flux was incorporated as a dimensionless number and modeled as a function of the thermal diffusivities of the casting and the mould materials. Heat flux transients were normalised with respect to the peak heat flux and modeled as a function of time. The heat flux model proposed was used to estimate the heat flux transients during solidification in graphite lined copper composite moulds.     

Myeloid-Derived Suppressor Cells Gain Suppressive Function during Neonatal Bacterial Sepsis

Neonates are at an increased risk of an infectious disease. This is consistent with an increased abundance of myeloid-derived suppressor cells (MDSCs) compared with older children and adults. Using a murine model of neonatal bacterial sepsis, we demonstrate that MDSCs modulate their activity during an infection to enhance immune suppressive functions. A gene expression analysis shows that MDSCs increased NOS2, Arg-1 and IL-27p28 expression in vitro and in vivo in response to Escherichia coli O1:K1:H7 and this is regulated at the level of the gene expression. Changes in the effector gene expression are consistent with increased enzymatic activity and cytokine secretion. The neonatal MDSCs express toll-like receptor (TLR) 2, 4 and 5 capable of recognizing pathogen-associated molecular patterns (PAMPS) on E. coli. However, a variable level of effector expression was achieved in response to LPS, peptidoglycan or flagellin. Individual bacterial PAMPs did not stimulate the expression of Arg-l and IL-27p28 equivalently to E. coli. However, the upregulation of NOS2 was achieved in response to LPS, peptidoglycan and flagella. The increased immune suppressive profile translated to an enhanced suppression of CD4+ T cell proliferation. Collectively, these findings increase our understanding of the dynamic nature of MDSC activity and suggest that these cells abundant in early life can acquire activity during an infection that suppresses protective immunity.     

Deposition of hydroxyapatite coatings by axial plasma spraying: Influence of feedstock characteristics on coating microstructure,phase content and mechanical properties

Axial plasma spray is one of the thermal spray techniques to deposit multifunctional advanced coatings. The present work explores the use of this process to deposit thin, continuous, and adherent Ca₅ (PO₄)₃OH (hydroxyapatite, HAp) coatings and characterize its microstructure, phases, hardness and adhesion strength. Three different suspension-deposited HAp coatings were investigated and compared with powder-deposited HAp coating on a Ti6Al4V substrate. The effect of mean solute particle size and solid-loading in the suspension has been explored on the evolution of microstructure, phase content and mechanical properties of axial suspension plasma sprayed (ASPS) coatings. Phase-characterization has shown retention of hydroxyapatite phase and coating crystallinity in the deposited coatings, whereas the adhesion strength of the HAp coating decreased from ～40 MPa to ～13 MPa when bioglass was added to the feedstock material. The lower solid load content and lower mean solute particle size in the suspension were found to be beneficial in achieving porous, rougher, and well-adhering coatings. This work concludes that ASPS can potentially deposit thin HAp coatings (< 50 μm) with high adhesion strength.     

Performance Tuning and Reliability Analysis of the Electrostatically Configured Nanotube Tunnel FET with Impact of Interface Trap Charges

Silicon - This paper examines, an electrostatically configured Nano-Tube Tunnel Field-Effect Transistor (ED-NTTFET). During the fabrication process, different charges such as fixed charge, oxide...