Fuzzy boundary layer tuning for sliding mode systems as applied to the control of a direct drive robot

Chattering in the control signal is a significant problem in sliding mode control (SMC). The boundary layer approach is one of the many modifications proposed in the literature to avoid the chattering. In this approach, instead of the discontinuous SMC, a continuous feedback control law is employed in a boundary layer around the sliding surface. The thickness of the boundary layer is an important design parameter. This paper proposes a fuzzy online tuning method to adjust the boundary layer thickness for the best system performance without chattering. The method features the measurement of the chattering in the control signal. The paper validates the performance of the algorithm by experiments on a direct drive robot with a range of different payloads.     

仿射子空间最近点分类算法

为了取得更好的识别效果,受支持向量机的几何解释和最近点问题启发,提出了一种新的模式分类算法——仿射子空间最近点算法。该算法是将支持向量机最近点法的最近点搜索区域由两类训练集凸包推广到两类训练样本各自张成的仿射子空间,并以仿射子空间作为样本分布的粗略估计,通过仿射子空间中的最近点对来构造平分仿射子空间间隔的最优分类超平面。该算法在ORL人脸识别数据库上进行的比较实验中取得了较好的识别效果,从而证实了该方法的可行性和有效性。     

Forward scattering of a Gaussian beam by a nonabsorbing sphere

The forward scattering of a Gaussian laser beam by a spherical particle located along the beam axis is analyzed with the generalized Lorenz-Mie theory (GLMT) and with diffraction theory. Forwardscattering and near-forward-scattering profiles from electrodynamically levitated droplets, 51.6 μm in diameter, are also presented and compared with GLMT-based predictions. The total intensity in the forward direction, formed by the superposition of the incident and the scattered fields, is found to correlate with the particle-extinction cross section, the particle diameter, and the beam width. Based on comparison with the GLMT, the diffraction solution is accurate when beam widths that are approximately greater than or equal to the particle diameter are considered and when large particles that have an extinction efficiency near the asymptotic value of 2 are considered. However, diffraction fails to describe the forward intensity for more tightly focused beams. The experimental observations, which are in good agreement with GLMT-based predictions, reveal that the total intensity profile about the forward direction is quite sensitive to particle axial position within a Gaussian beam. These finite beam effects are significant when the ratio of the beam to the particle diameter is less than approximately 5:1. For larger beam-to-particle-diameter ratios, the total field in the forward direction is dominated by the incident beam.     

Detection of COVID-19 and its pulmonary stage using Bayesian hyperparameter optimization and deep feature selection methods

Since the first case of COVID-19 was reported in December 2019, many studies have been carried out on artificial intelligence for the rapid diagnosis of the disease to support health services. Therefore, in this study, we present a powerful approach to detect COVID-19 and COVID-19 findings from computed tomography images using pre-trained models using two different datasets. COVID-19, influenza A (H1N1) pneumonia, bacterial pneumonia and healthy lung image classes were used in the first dataset. Consolidation, crazy-paving pattern, ground-glass opacity, ground-glass opacity and consolidation, ground-glass opacity and nodule classes were used in the second dataset. The study consists of four steps. In the first two steps, distinctive features were extracted from the final layers of the pre-trained ShuffleNet, GoogLeNet and MobileNetV2 models trained with the datasets. In the next steps, the most relevant features were selected from the models using the Sine–Cosine optimization algorithm. Then, the hyperparameters of the Support Vector Machines were optimized with the Bayesian optimization algorithm and used to reclassify the feature subset that achieved the highest accuracy in the third step. The overall accuracy obtained for the first and second datasets is 99.46% and 99.82%, respectively. Finally, the performance of the results visualized with Occlusion Sensitivity Maps was compared with Gradient-weighted class activation mapping. The approach proposed in this paper outperformed other methods in detecting COVID-19 from multiclass viral pneumonia. Moreover, detecting the stages of COVID-19 in the lungs was an innovative and successful approach.     

Low voltage second-order alpha function synapse

This paper introduces a Transimpedance Amplifier (TIA) design capable of producing an incremental input resistance in the ohmic range, for input signals in the microampere range, such as are encountered in the design of instrumentation for electrochemical ampero-metric sensors, optical-sensing and current-mode circuits. This low input-resistance is achieved using an input stage incorporating negative feedback. In a Cadence simulation of an exemplary design using a 180 nm CMOS process and operating with?±?1.8 V supply rails, the input resistance is 1.05 ohms and the power dissipation is 93.6 µW. The bandwidth, for a gain of 100 dBohm, exceeded 9 MHz. For a 1µA, 1 MHz sinusoidal input signal the Total Harmonic Distortion, with this gain, is less than 1%. The input referred noise current with zero photodiode capacitance is 2.09 pA/√Hz and with a photodiode capacitance of 2pF is 8.52 pA/√Hz. Graphical data is presented to show the effect of a photodiode capacitance varying from 0.5 to 2 pF, when the TIA is used in optical sensing. In summary, the required very low input resistance, at a low input current level (µA) is achieved and furthermore a Table is included comparing the characteristics and a widely used Figure of Merit (FOM) for the proposed TIA and similar published low-power TIAs. It is apparent from the Table that the FOM of the proposed TIA is better than the FOMs of the other TIAs mentioned.

     

The Training of Pi-Sigma Artificial Neural Networks with Differential Evolution Algorithm for Forecasting

Computational Economics - Looking at the artificial neural networks’ literature, most of the studies started with feedforward artificial neural networks and the training of many feedforward...     

Investigation on replication of microfluidic channels by hot embossing

In this study, effects of embossing temperature, time, and force on production of a microfluidic device were investigated. Polymethyl methacrylate (PMMA) substrates were hot embossed by using a micromilled aluminum mold. The process parameters were altered to observe the variation of replication rate in width and depth as well as symmetry of the replicated microfluidic channels. Analysis of variance (ANOVA) on the experimental results indicated that embossing temperature was the most important process parameter, whereas embossing time and force have less impact. One distinguishing aspect of this study is that, the channels were observed to be skewed to either side of the channel depending on the location of the protrusions on the mold. The mechanism of the skewness was investigated by finite element analysis and discussed in detail. Results showed that the skewness depends on the flow characteristics of the material and could be reduced by increasing the embossing temperature. The best replication rates were obtained at parameter settings of 115°C, 10?kN, and 8?min for the molds with minimum 56?µm wide features of 120?µm depth. We also showed that the fabricated channels could be successfully sealed by solvent-assisted thermo-compressive bonding at 85°C under 5.5?kN force.     

Electrical and Dielectric Properties of Y<Superscript>3+</Superscript>-Substituted Barium Hexaferrites

In this study, Y³⁺ ion-substituted M-type barium hexaferrites (BaM; BaFe₁₂O₁₉) were fabricated via facile ceramic route. As-prepared powders were characterized by X-ray powder diffractometry (XRD), Fourier transform infrared (FT-IR) spectroscopy, and impedance spectroscopy. XRD (Rietveld) analyses confirmed the presence of a single characterization of all samples (except x = 0.0 and 0.1 samples). The crystallite sizes of products are found in the range of 47.2–63.2 nm. Spectral analysis (FT-IR) also presented the formation of spinel structure for all products. The ac conductivity of the substituted samples was found to initially decrease slightly with increase in Y³⁺ compared with unsubstituted, and then variation tendency changes at the medium substitution ranges are observed with a different attitude against temperature. In the end, the lower conductivity for high substitutions is recorded and increases as functions of frequency while it also increases with the elevation of temperature. It was observed that ac conductivities of products increased by increasing frequency which indicate that observed ac conductivity is due to both electronic and polaron hopping mechanism.     

Stochastic two-sided U-type assembly line balancing: a genetic algorithm approach

In this paper, a novel stochastic two-sided U-type assembly line balancing (STUALB) procedure, an algorithm based on the genetic algorithm and a heuristic priority rule-based procedure to solve STUALB problem are proposed. With this new proposed assembly line design, all advantages of both two-sided assembly lines and U-type assembly lines are combined. Due to the variability of the real-life conditions, stochastic task times are also considered in the study. The proposed approach aims to minimise the number of positions (i.e. the U-type assembly line length) as the primary objective and to minimise the number of stations (i.e. the number of operators) as a secondary objective for a given cycle time. An example problem is solved to illustrate the proposed approach. In order to evaluate the efficiency of the proposed algorithm, test problems taken from the literature are used. The experimental results show that the proposed approach performs well.     

Coping with production time variability via dynamic lead-time quotation

In this paper, we propose two dynamic lead-time quotation policies in an M/GI/1 type make-to-stock queueing system serving lead-time sensitive customers with a single type of product. Incorporating non-exponential service times in an exact method for make-to-stock queues is usually deemed difficult. Our analysis of the proposed policies is exact and requires the numerical inversion of the Laplace transform of the sojourn time of an order to be placed. The first policy assures that the long-run probability of delivering the product within the quoted lead-time is the same for all backlogged customers. The second policy is a refinement of the first which improves the profitability if customers are oversensitive to even short delays in delivery. Numerical results show that both policies perform close to the optimal policy that was characterized only for exponential service times. The new insight gained is that the worsening impact of the production time variability, which is felt significantly in systems accepting all customers by quoting zero lead times, decreases when dynamic lead-time quotation policies are employed.