Effect of feeding pattern on biochemical storage by activated sludge under anoxic conditions

This study investigated the effect of feeding pattern on bacterial storage under anoxic conditions, emphasizing previous adaptation of biomass to a long term feeding condition, under steady-state operation. Storage was evaluated in a sequencing batch reactor (SBR) system operated in a sequence of anoxic/aerobic phases, fed with acetate as the sole carbon source during anoxic conditions. The experimental results indicated that biochemical storage of acetate as PHB occurred when substrate was fed as a pulse, while acetate was removed mostly through direct microbial growth under continuous feeding. For pulse feeding, the anoxic yield, Y(STOD) was calculated as 0.58mg COD (mgCOD)(-1) in two different ways, using mass balances on acetate utilization, PHB generation and nitrate consumption. This value was supported by parallel batch tests and similar results in the literature. Similarly, the rate coefficient for storage under anoxic conditions, k(STOD) was computed as 9.3day(-1) based on basic stoichiometry and model calibration of experimental data. Batch tests conducted with biomass adapted to different feeding patterns showed that substrate storage was insignificant when the feed was added continuously at low concentrations, even if the biomass was previously adapted to storage. Similarly biomass acclimated to continuous feeding could not store the excess substrate although fed instantly. For the operating conditions selected for the study, storage response was significant only with a microbial culture with metabolic activities previously adapted to storage and with short-term substrate feeding at high concentrations.     

Effect of the atmospheric plasma treatment parameters on jute fabric: The effect on mechanical properties of jute fabric/polyester composites

The effect of atmospheric air plasma treatment of jute fabrics on the mechanical properties of jute fabric reinforced polyester composites was investigated. The jute fabrics were subjected to different plasma powers (60, 90, and 120 W) for the exposure times of 1, 3, and 6 min. The effects of plasma powers and exposure times on interlaminar shear strength, tensile strength, and flexural strength of polyester based composites were evaluated. The greatest ILSS increase was about 171% at plasma power of 120 W and exposure time of 6 min. It is inferred that atmospheric air plasma treatment improves the interfacial adhesion between the jute fiber and polyester. This result was also confirmed by scanning electron microscopy observations of the fractured surfaces of the composites. The greatest tensile strength and flexural strength values were determined at 120 W for 1 min and at 60 W for 3 min, respectively. Moreover, it can be said that atmospheric air plasma treatment of jute fibers at longer exposure times (6 min) made a detrimental effect on tensile and flexural properties of jute‐reinforced polyester composites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Nickel removal characteristics of an immobilized macro fungus: equilibrium,kinetic and mechanism analysis of the biosorption

BACKGROUND: An immobilized new biosorbent was prepared from macro fungi Lactarius salmonicolor for the effective removal of nickel ions from aqueous media. Operating conditions were optimized as functions of initial pH, agitation time, sorbent amount and dynamic flow rate. Immobilization and biosorption mechanism were examined and the developed biosorbent was tested for the removal of nickel ions from real wastewater. RESULTS: Biosorption performance of the biomass continuously increased in the pH range 2.0–8.0. The coverage of the biosorbent surface by silica gel resulted in a significant increase in biosorption yield of nickel ions. The highest nickel loading capacity was obtained as 114.44 mg g^?1 using a relatively small amount of immobilized biosorbent. Biosorption equilibrium time was recorded as 5 min. Experimental data were analyzed by different isotherm and kinetic models. Infrared spectroscopy, scanning electron microscopy and X‐ray energy dispersive analysis confirmed the process. The sorbent exhibited relatively good recovery potential in dynamic flow mode studies. Biosorption capacity of immobilized biosorbent was noted as 14.90 mg g^?1 in real wastewater. CONCLUSION: Silica gel immobilized biomass of L. salmonicolor is to be a low cost and potential biosorbent with high biosorption capacity for the removal of contaminating nickel from aqueous media. © 2012 Society of Chemical Industry     

Comparison of effects of slurry ice and flake ice pretreatments on the quality of aquacultured sea bream (Sparus aurata) and sea bass (Dicentrarchus labrax) stored at 4 °C

Slurry ice, a biphasic system consisting of small particles of spherical ice immersed in seawater at subzero temperature, was evaluated as a new chilled method for whole sea bream (Sparus aurata) and sea bass (Dicentrarchus labrax). Two types of different chilling methods were used for two species in this study; slurry ice-treated sea bream (Group A), slurry ice-treated sea bass (Group B), flake-ice treated sea bream (Group C) and flake ice-treated sea bass (Group D). The effects of this system on the quality and shelf life of these two species were evaluated. Mesophilic counts for sea bass exceeded 7 log cfu/g, which is considered the maximum level for acceptability for freshwater and marine fish after 13 days for Groups C, D and 15 days for Groups A, B. At day 13, TVB-N values of Groups C, D reached the legal limits (35 mg/100 g set for TVB-N) for consumption. According to the results of sensory analyses, up to day 13, all the Groups were determined as ‘acceptable’ but, on day 15, the Groups A, B, C, D were no longer acceptable. Using slurry ice pretreatment for 2 h before the storage period presumably caused the deleterious effect on appearance as well as salt and water uptake. According to the results of chemical and microbiological analyses, use of slurry ice pretreatment for 2 h extended the shelf life of sea bream and sea bass stored at 4 °C for only two days longer than did use of flake ice.     

Effect of ungutting on microbiological, chemical and sensory properties of aquacultured sea bream (Sparus aurata) and sea bass (Dicentrarchus labrax) stored in ice

The effect of ungutting on microbiological, chemical and sensory properties of aquacultured sea bream (Sparus aurata) and sea bass (Dicentrarchus labrax) stored in ice were studied. The total viable mesophilic and psychrophilic bacterial counts increased throughout the storage period of ungutted sea bream and sea bass. Mesophilic counts of ungutted sea bream and sea bass reached 7.39 log cfu/g and 7.26 log cfu/g after 9 days. At the end of the storage period of 14 days; TVB-N, TBA, TMA-N values of ungutted sea bream were determined as 37.5±0.51 mg/100 g, 3.82±0.03 mg MA/kg, 7.73±0.25 mg/100 g, respectively. TVB-N, TBA, TMA-N values of ungutted sea bass were reached 35.4±0.9 mg/100 g, 3.75±0.81 mg MA/kg, 6.94±0.08 mg/100 g on day 14th, respectively. Result of this study indicates that the shelf life of whole ungutted sea bream stored in ice as determined by the overall acceptability sensory scores, chemical quality and microbiological data is 12, 9 and 9 days, respectively. Each chemical, sensory and microbiological results for sea bream showed us that there was a correlation and similarity, and day 9 was the beginning of spoilage. Whole ungutted sea bass stored in ice as chemical results for sea bass showed us that day 7 was the beginning of spoilage and for sea bream day 9 was the beginning of spoilage.     

Nanofiber network of electropolymerized 3,4-(2-benzylpropylenedioxy)thiophene on single carbon fiber microelectrode

Electropolymerization of 3,4-(2-benzylpropylene)-dioxythiophene (ProDOT-Bz) on (approximately 7 microm diameter) single carbon fiber microelectrodes (SCFMEs) in different electrolytes resulted the network of nanofiber structure. Electropolymerization performed in different electrolytes by using cyclovoltammetric technique. Surface morphology of coatings was investigated by Scanning Electron Microscopy (SEM), the attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) was used for the characterization. A linear relationship between peak currents of films with polymerization charge, and capacitances and coating thickness were obtained. The size of nanofiber network (and pores) can be controlled by the scan rate of the cyclovoltammetric process. Electrochemical impedance spectroscopic investigation of these nanostructures has been indicated the capacitive behavior of electrode system. Electrochemical Impedance Spectroscopic characterization (Capacitance) of the PProDOTBz/SCFME consisting cell was simulated at applied potential and parameters explained by equivalent circuit modeling.     

Electrospun porous cellulose acetate fibers from volatile solvent mixture

Electrospun porous cellulose acetate (CA) fibers were produced from highly volatile binary solvent system; dichloromethane(DCM)/acetone. The morphology and porous structure of CA fibers were highly dependent on DCM/acetone ratio and the concentration of the solutions. Ribbon-like porous CA fibers were obtained from 5% (w/v) to 10% (w/v) polymer solutions depending on the DCM/acetone ratio; 1/1, 2/1, 3/1 and 9/1 (v/v). Using higher DCM/acetone ratio resulted in bead-free fibers from less concentrated polymer solutions due to the high viscosity of the solutions, in addition, more porous CA fibers were obtained owing to the high volatility of DCM.