Electrospun polymeric nanofibrous composites containing TiO2 short nanofibers

In this study, polymeric nanofibrous composites containing anatase TiO₂ short nanofibers (TiO₂-SNF) were successfully produced via electrospinning. The fabrication of the nanofibrous composite structure includes two steps. First, anatase TiO₂ nanofibers were obtained by calcination of electrospun PVP/TiO₂ nanofibers and then crushed into short nanofibers ranging from few microns in length. Second, these TiO₂-SNF were dispersed into polymer solutions and then electrospun into nanofibrous composites. We obtained nanofibers containing TiO₂-SNF from different polymer types including PMMA, PAN, PET and PC. The SEM and TEM imaging indicated that some of the TiO₂-SNF were fully covered by the polymeric matrix whereas some TiO₂-SNF were partially covered and/or stick on the surface of the fibers. The photocatalytic activity of nanofibrous composites containing TiO₂-SNF was evaluated by monitoring the photocatalytic decomposition of a model dye (rhodamine-6G) under UV irradiation.     

Escherichia coli, enterococci, and Bacteroides thetaiotaomicron qPCR signals through wastewater and septage treatment

Fecal indicators such as Escherichia coli and enterococci are used as regulatory tools to monitor water with 24 h cultivation techniques for possible input of sewage or feces and presence of potential enteric pathogens yet their source (human or animal) cannot be determined with routine methods. This critical uncertainty has furthered water pollution science toward new molecular approaches. Members of Bacteroides genus, such as Bacteroides thetaiotaomicron are found to have features that allow their use as alternative fecal indicators and for Microbial Source Tracking (MST). The overall aim of this study was to evaluate the concentration and fate of B. thetaiotaomicron, throughout a wastewater treatment facility and septage treatment facility. A large number of samples were collected and tested for E. coli and enterococci by both cultivation and qPCR assays. B. thetaiotaomicron qPCR equivalent cells (mean: 1.8 × 10⁷/100 mL) were present in significantly higher concentrations than E. coli or enterococci in raw sewage and at the same levels in raw septage. The removal of B. thetaiotaomicron target qPCR signals was similar to E. coli and enterococci DNA during the treatment of these wastes and ranged from 3 to 5 log₁₀ for wastewater and was 7 log₁₀ for the septage. A significant correlation was found between B. thetaiotaomicron marker and each of the conventional indicators throughout the waste treatment process for both raw sewage and septage. A greater variability was found with enterococci when compared to E. coli, and CFU and equivalent cells could be contrasted by various treatment processes to examine removal and inactivation via septage and wastewater treatment. These results are compared and contrasted with other qPCR studies and other targets in wastewater samples providing a view of DNA targets in such environments.     

Luminescence intensity monitoring in a MOS tunnel structure with inhomogeneous thickness of the insulator

The electroluminescence (EL) time series in a metal-oxide-semiconductor tunnel structure of the Al/SiO₂/p-Si type have been measured. It is demonstrated that analysis of the EL curves in some cases provides more correct information about the state of the oxide layer as compared to that obtained from the results of electric current monitoring.     

Melt‐blowing thermoplastic polyurethane and polyether‐block‐amide elastomers: Effect of processing conditions and crystallization on web properties

Melt‐blown webs from ester and ether thermoplastic polyurethanes and polyether‐block‐amide (PEBA) elastomers were produced at different die‐to‐collector distances (DCD) to study the correlation between the polymer type and hardness, melt‐blowing process conditions, and web properties. An experimental set up was built to measure the air temperature and velocity profiles below and across the melt‐blowing die to correlate the fiber formation process and polymer crystallization behavior to process conditions and web properties. It was shown that air temperature and velocity profiles follow similar trends with increasing distance below the melt‐blowing die: both drop rapidly until reaching a plateau region approximately 5–6 cm below the die. Thereafter, they remain relatively constant with further increasing distance. It was found that crystallization onset and peak temperatures of all block copolymers in this study fall within this region of rapid velocity and temperature drop. This suggests that the polymers have already started to crystallize and solidify before reaching the collector, the extent of which depends on the crystallization kinetics of the polymer. The strong influence of the crystallization kinetics on web strength was clearly demonstrated in the PEBA series. In particular, the hardest grade produced the lowest web strength mainly because of its high crystallization rate and crystallization onset temperature. It is concluded that the melt‐blown web strength is strongly dependent on the degree of fiber‐to‐fiber adhesion within the web, which is determined by the amount of fiber solidification that occurs prior to the collector. The crystallization kinetics of the polymer and the distances traveled between the die and collector or the exposure time of the polymer melt to process and ambient air were shown to be critical in the amount of fiber solidification attained. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

Teaching construction sciences with the integration of BIM to undergraduate architecture students

This study aims to test two hypotheses: teaching building information modeling (BIM) in relation to construction science provides students with a remarkable understanding of the nature of construction science (Hypothesis 1), and if the student has positive attitude toward the use of the BIM program, then efficiency by which construction science is taught by its means is improved (Hypothesis 2). Results and process of a case study with a novel teaching methodology were discussed in terms of the benefits of the students. A questionnaire study was conducted on the student group with which the case study was performed to test each student's attitude. Results were evaluated statistically. When BIM is integrated with the teaching of basic construction courses within architecture degree programs, the students understood the building system principles simply and effectively. As a result of the statistical analysis, the students find the applied method effective. Moreover, their attitude toward BIM affects the process.     

Platinum‐promoted fibrous silica Y zeolite with enhanced mass transfer as a highly selective catalyst for n‐dodecane hydroisomerization

A fibrous silica zeolite Y (HY@KCC‐1) catalyst with a high surface area of 568 m²/g and unique core‐shell morphology was successfully synthesized via a modified KCC‐1 synthesis method. Characterization of the catalysts was achieved with X‐ray powder diffraction (XRD), field emission scanning microscope (FESEM), N₂ adsorption/desorption, and 2,6‐dimethylpyridine adsorbed Fourier‐transform infrared spectroscopy (FTIR). The Pt/HY@KCC‐1 has displayed complete n‐dodecane conversion coupled with an incredibly enhanced isomer yield of 72% at 350°C, nearly two‐fold higher than that of unmodified Pt/HY catalyst. Remarkably, Pt/HY@KCC‐1 had an internal effectiveness factor (η) of unity and negligible internal diffusion limitation, thus suggesting its potential application in hydroisomerization of higher hydrocarbons for enhancing fuel properties.     

Slurry analysis after lead collection on a sorbent and its determination by electrothermal atomic absorption spectrometry

In this study, in order to eliminate the drawbacks of elution step and to reach higher enrichment factors, a novel preconcentration/separation technique for the slurry analysis of sorbent loaded with lead prior to its determination by electrothermal atomic absorption spectrometry was described. For this purpose, at first, lead was collected on ethylene glycol dimethacrylate methacrylic acid copolymer (EGDMA-MA) treated with ammonium pyrolidine dithiocarbamate (APDC) by conventional batch technique. After separation of liquid phase, slurry of the sorbent was prepared and directly pipetted into graphite furnace of atomic absorption spectrophotometer. Optimum conditions for quantitative sorption and preparation of the slurry were investigated. A 100-fold enrichment factor could be easily reached.

The analyte element in certified sea-water and Bovine-liver samples was determined in the range of 95% confidence level. The proposed technique was fast and simple and the risks of contamination and analyte loss were low. Detection limit (3δ) for Pb was 1.67 μg l⁻¹.     

Determination of optimal EDM machining parameters for machined pure titanium-porcelain adhesion

The objective of this experimental study is to determine electrical discharge machining (EDM) parameters that offer the best adhesion at the interface of a machined titanium–porcelain composite. First of all, with Taguchi method, machining parameters that will be effective in the bonding strength as well as their interactions on each other were determined in the test. Then, multiple level experiments were conducted to determine how the effective parameters varied over a wide area. Slopes of the curves obtained in these tests were studied, and then, final tests were conducted to obtain the best bonding strength possible. In this way, machining parameters that would offer the highest bonding strength of the titanium–porcelain matrix in a stepwise adjustable EDM machine were obtained. By taking into consideration the steps on the EDM machine where the tests were conducted, it is seen that, when a full factorial experiment is undertaken, 5 power?×?2 polarity?×?2 type of dielectric?×?2 sandblasting or non-sandblasting?×?2 kind of electrode?×?10 pulse-on time, it necessitates 800 different tests to be executed, but, with the applied method, 16?+?18?+?3 yields 37 different tests where the results that include all possible alternatives were obtained. As a result, EDM machining parameters that offer the highest adhesion and are relatively higher, 31.5 N/mm², than the acceptable minimum value of 25 N/mm² were specified.     

Consumer Acceptability of Fresh‐Market Muscadine Grapes

The objective of this research was to investigate the acceptability of muscadine grape (Vitis rotundifolia) genotypes (cultivars and selections) and to correlate overall liking to other quality measurements to determine the main drivers of liking. Twenty‐two genotypes grown at the Univ. of Georgia–Tifton Campus were evaluated. Four retail commercial grape genotypes (Vitis vinifera and “Concord”) were also evaluated for comparison. Panelists familiar with muscadine grapes used the hedonic general labeled magnitude scale (HgLMS, –100 = strongest disliking of any kind ever experienced, +100 = strongest liking of any kind ever experienced) to rate overall liking and the liking of appearance, flavor, pulp texture, and skin texture. Puncture testing was done to assess grape berry texture, and compositional attributes soluble solids and pH were also measured. The sensory results indicated that the grapes were variable with overall liking scores from 12.2 to 39.6. The factors highly correlated with overall liking scores were muscadine flavor, pulp and skin liking, while a significant negative correlation was found between skin liking and skin texture and mechanical texture measures. The muscadine grapes with the highest overall liking scores were Ga. 5‐1‐34 and Ga. 2‐8‐21. Principal component analysis confirmed that grapes with a thinner skin and a higher pH tended to group around overall liking and flavor points. These results indicate that even among panelists familiar with muscadine grapes, skin thickness is a negative characteristic. Breeding for thinner skins may be a positive step in muscadines gaining a more widespread appeal in the fresh fruit market.