Dynamic Recrystallization Behavior of a Fe-Cr-Ni Super-Austenitic Stainless Steel

The super-austenitic stainless steels are extensively utilized in the seamless tubes production for oil extraction industries.Due to the importance of thermo-mechanical processing in the production of these tubes, the dynamic recrystallization(DRX)characteristics of a Cr-Ni super austenitic stainless steel(1.4563)were investigated in the present study.This was performed using the hot compression testing method in the temperature range of 950-1150-C and the strain rate of 10-3-10-1 s-1.The initiation and evo...     

Occurrence, oral exposure and risk assessment of volatile organic compounds in drinking water for Izmir

Concentrations of volatile organic compounds (VOCs) were measured in the drinking water in Province of Izmir, Turkey, and associated health risks due to ingestion of these compounds were investigated using population weighted random samples. A total of 100 houses were visited in different districts of Izmir and drinking water samples were collected from consumers' drinking water source. Questionnaires were administered to one participant in each house to determine demographics and drinking water consumption rates. Oral exposure and risks were estimated for each participant and Izmir population by deterministic and probabilistic approaches, respectively. The four trihalomethane (THM) species (i.e., chloroform, bromodichloromethane, dibromochloromethane, and bromoform), benzene, toluene, p-xylene, and naphthalene were the most frequently detected VOCs with concentrations ranging from below detection limit to 35 microg/l. The risk estimates were found to be less than the values reported in the literature with few exceptions. Noncarcinogenic risks attributable to ingestion of VOCs for Izmir population were negligible, whereas the mean carcinogenic risk estimates for bromodichloromethane and dibromochloromethane were above the de minimis level of one in a million (10(-6)). For all VOCs, the concentrations measured in metropolitan area were greater than those in other districts. All THM species were detected in higher concentrations in tap water, whereas nontap water contained more benzene, toluene, p-xylene, and naphthalene. Therefore, the concentrations of the latter four compounds and associated risks increased with increasing income and education level since bottled water was used in larger proportions within these subgroups. The results of this study showed that oral exposure to drinking water contaminants and associated risks may be higher than the acceptable levels even if the concentrations fall below the standards.     

Particle-phase dry deposition and air-soil gas-exchange of polybrominated diphenyl ethers (PBDEs) in Izmir, Turkey

The particle-phase dry deposition and soil-air gas-exchange of polybrominated diphenyl ethers (PBDEs) were measured in Izmir, Turkey. Relative contributions of different deposition mechanisms (dry particle, dry gas, and wet deposition) were also determined. BDE-209 was the dominating congener in all types of samples (air, deposition, and soil). Average dry deposition fluxes of total PBDEs (sigma7PBDE) for suburban and urban sites were 67.6 and 128.8 ng m(-2) day(-1), respectively. Particulate dry deposition velocities ranged from 11.5 (BDE-28) to 3.9 cm s(-1) (BDE-209) for suburban sites and 7.8 (BDE-28) to 2.8 cm s(-1) (BDE-154) for urban sites with an overall average of 5.8 +/- 3.7 cm s(-1). The highest sigma7PBDE concentration (2.84 x 10(6) ng kg(-1) dry wt) was found around an electronic factory among the 13 soil samples collected from different sites. The concentration in a bag filter dust from a steel plant was also high (2.05 x 10(5) ng kg(-1)), indicating that these industries are significant PBDE sources. Calculated net soil-air gas exchange flux of sigma7PBDE ranged from 11.8 (urban) to 23.4 (industrial) ng m(-2) day(-1) in summer, while in winter it ranged from 3.2 (urban) to 11.6 (suburban) ng m(-2) day(-1). All congeners were deposited at all three sites in winter and summer. It was estimated that the wet deposition also contributes significantly to the total PBDE deposition to soil. Dry particle, wet, and gas deposition contribute 60, 32, and 8%, respectively, to annual PBDE flux to the suburban soil.     

A Route Towards Sustainability Through Engineered Polymeric Interfaces

Chemical vapor deposition (CVD) of polymer films represent the marriage of two of the most important technological innovations of the modern age. CVD as a mature technology for growing inorganic thin films is already a workhorse technology of the microfabrication industry and easily scalable from bench to plant. The low cost, mechanical flexibility, and varied functionality offered by polymer thin films make them attractive for both macro and micro scale applications. This review article focuses on two energy and resource efficient CVD polymerization methods, initiated Chemical Vapor Deposition (iCVD) and oxidative Chemical Vapor Deposition (oCVD). These solvent‐free, substrate independent techniques engineer multi‐scale, multi‐functional and conformal polymer thin film surfaces and interfaces for applications that can address the main sustainability challenges faced by the world today.     

Particulate Dry Deposition and Overall Deposition Velocities of Polycyclic Aromatic Hydrocarbons

Previous studies have shown that the dry deposition of semivolatile organic compounds to the Great Lakes can account for a significant fraction of their total inputs. However, there is no generally accepted method to directly measure dry deposition. In this study the particulate dry deposition of polycyclic aromatic hydrocarbons (PAHs) was measured using smooth surrogate surfaces during the winter of 1996–1997 in Chicago. Concurrently, ambient air samples were collected. Average particulate Σ13-PAH fluxes and ambient concentrations were 120±28?μg/m2?d and 30±16?ng/m3, respectively. The measured particulate dry deposition fluxes were similar to those measured in other urban areas. Overall dry deposition velocities of PAHs calculated using the dry deposition fluxes and ambient concentrations averaged 4.5±3.1?cm/s. This value is higher than values typically used to estimate PAH particulate deposition, however, it agrees well with values determined using similar techniques. The overall dry deposition velocity for individual PAHs generally decreased with increasing molecular weight. This finding is consistent with the previous experimental studies that have shown that a greater fraction of the higher molecular weight PAHs are associated with fine particles relative to the lower molecular weight compounds.     

Ni and Cu incorporated mesoporous nanocomposite catalytic materials

Nickel and copper incorporated MCM-41-like mesoporous nanocomposite materials prepared by the direct hydrothermal synthesis and the impregnation procedures showed highly attractive pore structure and surface area results for catalytic applications. The XRD patterns showed that characteristic MCM-41 structure was preserved for the materials synthesized following an impregnation procedure before the calcination step. The surface area of the Cu impregnated material with a quite high Cu/Si atomic ratio (0.19) was 631 m2/g. Very narrow pore size distributions with an average pore diameter of about 2.7 nm were obtained as a result of plugging of some of the smaller pores by Cu nanoballs. For lower metal to Si ratios (for instance for Ni/Si = 0.06) much higher surface area values (1130 m2/g) were obtained. In the case of nanocomposite materials synthesized by the direct hydrothermal route, MCM-41 structure was not destroyed for samples containing metal to Si atomic ratios as high as 0.12. In the case of materials containing Cu/Si and Ni/Si ratios over 0.2 wider pore size distributions and some decrease of surface area were observed.