Water retention and gas relative permeability of two industrial concretes

This experimental study aims at identifying the water retention properties of two industrial concretes to be used for long term underground nuclear waste storage structures. Together with water retention, gas transfer properties are identified at varying water saturation level, i.e. relative gas permeability is assessed directly as a function of water saturation level S_w. The influence of the initial de-sorption path and of the subsequent re-saturation are analysed both in terms of water retention and gas transfer properties. Also, the influence of concrete microstructure upon water retention and relative gas permeability is assessed, using porosity measurements, analysis of the BET theory from water retention properties, and MIP. Finally, a single relative gas permeability curve is proposed for each concrete, based on Van Genuchten–Mualem's statistical model, to be used for continuous modelling approaches of concrete structures, both during drying and imbibition.     

Scheduling of open-pit phosphate mine extraction

Open-pit deposits are often characterised by a stack of layers of different geological nature. Some layers are worthless while the ore of the others is of a varying economic value depending on grade. To reach a layer, it is necessary to have first removed the upper layers above the extraction zone. This action results in uncovering the layer in this particular place and in facilitating access to the layers below. This extraction process involves a series of 2–7 basic operations; each one is performed by a machine, some of which are able to perform up to three different operations. Ensuring the consistency of mining extraction scheduling over a few months, in order to meet known or forecast demand, is a challenging task. A mining extraction model based on mathematical programming is proposed but it is hardly usable, due to its size. Therefore, a model based on a Discrete Event Simulation, is created to test how ore supplies are affected by the tactical and operational decisions relating to the choice of parcels to be processed and to the allocation of machines to the different basic operations.     

Typing artifacts in megamodeling

Model management is essential for coping with the complexity introduced by the increasing number and varied nature of artifacts involved in model-driven engineering-based projects. Global model management (GMM) addresses this issue by enabling the representation of artifacts, particularly transformation composition and execution, within a model called a megamodel. Type information about artifacts can be used for preventing type errors during execution. Built on our previous work, in this paper we present the core elements of a type system for GMM that improves its original typing approach and enables both typechecking and type inference on artifacts within a megamodel. This type system is able to deal with non-trivial situations such as the use of higher order transformations. We also present a prototypical implementation of such a type system.     

An online optimum voltage estimation and real‐time MPP tracking for a PV system

In this paper, a photovoltaic system topology incorporating a new maximum power point tracking (MPPT) controller method is presented. This method uses an autotuning estimator and a PI controller to make the system work in the maximum power point. The controller is formulated based on the bijectivity in the photovoltaic generator characteristic; therefore, if the optimal voltage is reached, this means that the maximum of power is obtained. The proposed MPPT algorithm is implemented on a dSpace DS1104 controller board. In order to demonstrate the efficiency of the proposed algorithm in real time, an experimental setup using a boost converter connected to a resistive load is successfully implemented and studied. The obtained experimental results prove the validity of the proposed MPPT algorithm.     

Smart-MEMS based inertial measurement units: gyro-free approach to improve the grade

Microsystem Technologies - Inertial measurement units (IMU) are essentially a combination of acceleration and rotation rate sensors, generating position and attitude information. For tactical and...     

In-Situ Analyzing the Influence of Thermoelectromagnetic Convection on the Nucleation Ahead of the Advancing Interface During Directional Solidification

Sn-3wt%Pb alloy was directionally solidified without and with a 0.08T transverse magnetic field(TMF),and real-time recorded by in-situ synchrotron X-ray imaging.Results indicate that TMF shortened the distance from the location of nucleation to the advancing interface,and accelerated the growth rate of the equiaxed crystal,which caused the columnar-to-equiaxed transition(CET)finally.The thermoelectromagnetic convection(TEMC)in front of the interface and around the crystal’s dendritic branch should respond to changes of the distance and the growth rate.     

Investigating the Blusa: The Cultural and Sartorial Biography of an Algerian Dress

This essay describes the evolution of the garment known as a blusa, worn by urban women in north-western Algeria. The blusa, a full-length dress with short sleeves, was conceived and developed in the cities of Tlemcen and Oran. It incorporates locally meaningful traditions as well as fashion styles in conjunction with different cultures. Its transformation illustrates how Algerian women resisted cultural assimilation through dress while creatively appropriating western European textiles, techniques and aesthetics in their clothing, during the French colonial period (1830–1962) and its aftermath. The exploration of the contemporary blusa variations reveals how the relationship between clothing and identity is still highly complex in Algerian cities. To date, the invention, the rituals, the design, and the production of the blusa dress has been little studied. This paper reconstitutes an historical puzzle based on recent object-based research and anthropological investigations. It seeks to interpret the blusa as an interface between tradition and modernity.     

A ticket to ride: Education and migration from lagging areas

National policies may have heterogeneous effects at the regional level. When coming to programmes aimed at increasing human capital, worker mobility from poorer to richer regions can reduce the benefits of the policy for the former areas. We focus on Italy and estimate the impact of education on the probability of migrating from a lagging area to a leading one. Endogeneity is addressed by exploiting an increase in the minimum school-leaving age in an instrumental variable framework. We find that one additional year of education increases the probability to migrate by 1.7 percentage points (9% of the average migration rate).