Reversible degradation of inverted organic solar cells by concentrated sunlight

Concentrated sunlight was used to study the performance response of inverted P3HT:PCBM organic solar cells after exposure to high intensity sunlight. Correlations of efficiency as a function of solar intensity were established in the range of 0.5-15 suns at three different stages: for a pristine cell, after 30 min exposure at 5 suns and after 30 min of rest in the dark. High intensity exposure introduced a major performance decrease for all solar intensities, followed by a partial recovery of the lost performance over time: at 1 sun only 6% of the initial performance was conserved after the high intensity exposure, while after rest the performance had recovered to 60% of the initial value. The timescale of the recovery effect was studied by monitoring the cell performance at 1 sun after high intensity exposure. This showed that cell performance was almost completely restored after 180 min. The transient state is believed to be a result of the breakdown of the diode behaviour of the ZnO electron transport layer by O(2) desorption, increasing the hole conductivity. These results imply that accelerated degradation of organic solar cells by concentrated sunlight is not a straightforward process, and care has to be taken to allow for a sound accelerated lifetime assessment based on concentrated sunlight.     

Heat dissipation in graphene foams

Graphene foam(GF)—a three-dimensional network of hollow graphene branches—is a highly attractive material for diverse applications.However,to date,the heat dissipation characteristics of GFs have not been characterized.To fill this gap,we synthesized GF devices,subjected them to high temperatures,and investigated their thermal behavior by using infrared microthermography.We find that while the convective area of GF devices is comparable to that of bulk materials(such as metals),the coefficient of convection of these devices is several orders of magnitude higher than that of metals.In addition,the GF devices showed a reproducible thermal behavior,which we attribute to negligible temperature-induced morphological changes(as confirmed by Raman analysis).Taken together,our findings suggest GF as a promising candidate material for advanced cooling applications where efficient heat dissipation is needed,e.g.,in electrical circuits.     

Endotoxemic-like shock induced by Loxosceles spider venoms: pathological changes and putative cytokine mediators

The systemic symptoms, tissue lesions and release of cytokines were analysed in four isogenic mouse strains with distinct haplotypes injected with various doses of Loxosceles intermedia spider venom. The estimated LD50 were 24.5 microg for C57Bl/6, 17.6 microg for BALB/c, 6.3 microg for C3H/HeJ and 4.6 microg for A/Sn mice. Prostration, acute cachexia, hypothermia, neurological disorders and hemoglobinuria were the signals preceding death. Accumulation of eosinophilic material inside the proximal and distal renal tubules and acute tubular necrosis were the most common histopathological findings. Death was prevented by previous treatment of venom with specific antivenom serum. The protein F35 purified from the whole venom retained the ability to induce the symptoms of the whole venom. The cytokines tumor necrosis factor (TNF), interleukins IL-6 and IL-10 and the radical nitric oxide were detected in serum at different levels after venom injection. These findings indicate that the state of shock produced in mice by whole endotoxin-free L. intermedia venom or by its purified fraction, protein F35, mimics the endotoxemic shock, that susceptibility to the systemic effects of the venom varies among mice of different haplotypes and that the pattern of in vivo cytokine release resembles that of endotoxemic shock.     

Backbone cyclic peptide, which mimics the nuclear localization signal of human immunodeficiency virus type 1 matrix protein, inhibits nuclear import and virus production in nondividing cells

Here, we describe an application of the backbone cyclic (BC) proteinomimetic approach to the design and the synthesis of a BC peptide which functionally mimics the nuclear localization signal (NLS) region of the human immunodeficiency virus type 1 matrix protein (HIV-1 MA). On the basis of the NMR structure of HIV-1 MA, a library of BC peptides was designed and screened for the ability to inhibit nuclear import of NLS-BSA in digitonin-permeabilized HeLa and Colo-205 cultured cells. The screening yielded a lead compound (IC50 = 3 microM) which was used for the design of a second library. This library led to the discovery of a highly potent BC peptide, designated BCvir, with an IC50 value of 35 nM. This inhibitory potency is compared to a value of 12 microM exhibited by the linear parent HIV-1 MA NLS peptide. BCvir also reduced HIV-1 production by 75% in infected nondividing cultured human T-cells and was relatively resistant to tryptic digestion. These properties make BCvir a potential candidate for the development of a novel class of antiviral drugs which will be based on blocking nuclear import of viral genomes.     

Reducing inventory data requirements for scenario representation in comparative life cycle assessment (LCA), demonstrated on the urban wastewater system

Wastewater reuse has become an attractive option for alleviating the stress from water resources. Centralized wastewater reuse is a common and continuously expanding practice worldwide, but the advantages of centralized over decentralized approaches are lately being questioned. Life cycle assessment (LCA) is a well-accepted means of assessing the overall environmental performance of service systems, however, construction of a life cycle inventory (LCI) for complex systems such as urban wastewater systems, is very time consuming. Lack of resources and unavailability of data often enforce constraints on the scope of the assessment. In such cases it may be beneficial to consider the approach presented here, which manifests the differences between the studied alternatives. By eliminating processes that remain unchanged, less data and human resources are required in building the inventory, and less parameter uncertainty is introduced into the analysis. The proposed approach is demonstrated through the conceptual modeling steps of an assessment of decentralized urban wastewater reuse alternatives.     

UV disinfection of RBC-treated light greywater effluent: kinetics, survival and regrowth of selected microorganisms

The microbial quality of raw greywater was found to be much better than that of municipal wastewater, with 1.6 x 10(7)cfu ml(-1) heterotrophic plate count (HPC), and 3.8 x 10(4), 9.9 x 10(3), 3.3 x 10(3) and 4.6 x 10(0)cfu 100 ml(-1) faecal coliforms (FC), Staphylococcus aureus sp., Pseudomonas aeruginosa sp. and Clostridium perfringes sp., respectively. Further, three viral indicators monitored (somatic phage, host: Escherichia coli CN(13) and F-RNA phages, hosts: E. coli F+(amp), E. coli K12) were not present in raw greywater. The greywater was treated by an RBC followed by sedimentation. The treatment removed two orders of magnitude of all bacteria. UV disinfection kinetics, survival and regrowth of HPC, FC, P. aeruginosa sp. and S. aureus sp. were examined. At doses up to 69 mW s cm(-2) FC were found to be the most resistant bacteria, followed by HPC, P. aeruginosa sp. and S. aureus sp. (inactivation rate coefficients: 0.0687, 0.113, 0.129 and 0.201 cm2 mW(-1)s(-1), respectively). At higher doses (69-439 mW s cm(-2)) all but HPC (which exhibited a tailing curve) were completely eliminated. Microscopic examination showed that FC self-aggregate in the greywater effluent. This provides FC an advantage at low doses, since the concentration of suspended matter (that can provide shelter from UV radiation) in the effluent was very low. FC, P. aeruginosa sp. and S. aureus sp. did not exhibit regrowth up to 6h after exposure to increasing UV doses (19-439 mW s cm(-2)). HPC regrowth was proven to be statistically significant in un-disinfected effluent and after irradiation with high UV doses (147 and 439 mW s cm(-2)). At these doses regrowth resulted from growth of UV-resistant bacteria due to decreased competition with other bacteria eliminated by the irradiation.     

Tuning energetic levels in nanocrystal quantum dots through surface manipulations

We demonstrate tuning of the electronic level positions with respect to the vacuum level in colloidal InAs nanocrystals using surface ligand exchange. Electrochemical as well as scanning tunneling spectroscopy measurements reveal that the tuning is largely dependent on the nanocrystal size and the surface linking group, while the polarity of the ligand molecules has a lesser effect. The implications of affecting the electronic system of nanocrystal through its capping are illustrated through prototype devices.     

Large-scale unrestricted identification of post-translation modifications using tandem mass spectrometry

TwinPeaks, a close variant of the SEQUEST protein identification algorithm, is capable of unrestricted, large-scale, identification of post-translation modifications (PTMs). TwinPeaks is applied on a sample of 100441 tandem mass spectra from the HUPO Plasma Proteome Project data set, with full non-redundant human as a reference protein database. With a 3.5% error rate, TwinPeaks identifies a collection of 539 spectra that were not identified by the usual PTM-restricted identification algorithm. At this error rate, TwinPeaks increases the rate of spectra identifications by at least 17.6%, making unrestricted PTM identification an integral part of proteomics.     

Effect of CaO addition on acid properties of Ni–Ca/Al2O3 catalysts applied to ethanol steam reforming

Ni/Al₂O₃ catalysts containing 5 wt% of Ni and modified by addition of CaO (0–5 wt%) were tested in ethanol steam reforming reaction in order to reduce the dehydration ethanol reaction, which produces ethylene that may polymerize and produce coke. The catalysts were prepared by impregnation (I) and co-precipitation (C) methods. All catalysts were investigated for ethanol steam reforming and the catalytic performance was compared in terms of additive addition. The catalysts 5Ni–5Ca/Al (I) and 5Ni–5Ca/Al (C) were less selective to ethylene production and therefore were characterized by the following techniques: energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), temperature programmed reduction (TPR), X-ray absorption near edge structure (XANES), specific surface area by the BET method, scanning electron microcopy (SEM) and isopropanol decomposition reaction. By comparing the catalysts, the 5Ni–5Ca/Al (I) catalyst presented the lowest acidity and carbon deposition, and also presented no deactivation in 24 h of catalytic test.