Characterisation of carbon blacks produced by solar thermal dissociation of methane

Solar methane dissociation appears as a possible route toward a hydrogen-based economy. The competitiveness of the process strongly depends on the carbon black properties and economic value. At CNRS-PROMES, a 50 kW tubular solar reactor was developed to produce carbon black and hydrogen from methane. The reaction was carried out in a graphite receiver crossed by seven graphite tubes heated up by concentrated solar radiations at the 1 MW CNRS solar furnace. The temperatures ranged between 1608 K and 1928 K and the methane flow-rates varied from 10.5 to 21 NL/min. Total methane dissociation was reached with hydrogen yield higher than 80% and the carbon yield was drastically affected by the acetylene by-product. The carbon samples were analysed in detail and their properties were compared to a commercial conductive grade carbon black. Transmission electron microscopy showed primary particles of 10–70 nm diameter. The crystallinity of the samples was characterised by Raman spectroscopy. It was also possible to correlate the specific surface area with the reaction temperature and with the concentrations of residual methane and of the acetylene by-product. The resistivity and the structure of the agglomerates were determined by simultaneous measurements of the conductivity and the density under compression.     

Production of hydrogen for fuel cells by reformation of biomass-derived ethanol

The reformation of biomass-derived ethanol to a hydrogen-rich gas stream suitable for feeding fuel cells is investigated as an efficient and environmentally friendly process for the production of electricity for mobile and stationary applications. Steam reforming of ethanol is investigated over Ni catalysts supported on La₂O₃, Al₂O₃, YSZ and MgO. The influence of several parameters on the catalytic activity and selectivity is examined including reaction temperature, water-to-ethanol ratio and space velocity. Results reveal that the Ni/La₂O₃ catalyst exhibits high activity and selectivity toward hydrogen production and, most important, long term stability for steam reforming of ethanol. The enhanced stability of this catalyst may be due to scavenging of coke deposition on the Ni surface by lanthanum oxycarbonate species which exist on top of the Ni particles under reaction conditions.     

Synthesis and Biopharmaceutical Evaluation of Imatinib Analogues Featuring Unusual Structural Motifs

A convenient synthesis of imatinib, a potent inhibitor of ABL1 kinase and widely prescribed drug for the treatment of a variety of leukemias, was devised and applied to the construction of a series of novel imatinib analogues featuring a number of non‐aromatic structural motifs in place of the parent molecule's phenyl moiety. These analogues were subsequently evaluated for their biopharmaceutical properties (e.g., ABL1 kinase inhibitory activity, cytotoxicity). The bicyclo[1.1.1]pentane‐ and cubane‐containing analogues were found to possess higher themodynamic solubility, whereas cubane‐ and cyclohexyl‐containing analogues exhibited the highest inhibitory activity against ABL1 kinase and the most potent cytotoxicity values against cancer cell lines K562 and SUP‐B15. Molecular modeling was employed to rationalize the weak activity of the compounds against ABL1 kinase, and it is likely that the observed cytotoxicity of these agents arises through off‐target effects.     

Liquid Biopsy: A New Translational Diagnostic and Monitoring Tool for Musculoskeletal Tumors

Soft tissue and bone sarcomas represent a group of aggressive neoplasms often accompanied by dismal patient prognosis, especially when distant metastases are present. Moreover, effective treatment can pose a challenge, as recurrences are frequent and almost half of patients present with advanced disease. Researchers have unveiled the molecular abnormalities implicated in sarcomas’ carcinogenesis, paving the way for novel treatment strategies based on each individual tumor’s characteristics. Therefore, the development of new techniques aiding in early disease detection and tumor molecular profiling is imperative. Liquid biopsy refers to the sampling and analysis of patients’ fluids, such as blood, to identify tumor biomarkers, through a variety of methods, including qRT-PCR, qPCR, droplet digital PCR, magnetic microbeads and digital PCR. Assessment of circulating tumor cells (CTCs), circulating free DNA (ctDNA), micro RNAs (miRs), long non-coding RNAs (lncRNAs), exosomes and exosome–associated proteins can yield a plethora of information on tumor molecular signature, histologic type and disease stage. In addition, the minimal invasiveness of the procedure renders possible its wide application in the clinical setting, and, therefore, the early detection of the presence of tumors. In this review of the literature, we gathered information on biomarkers assessed through liquid biopsy in soft tissue and bone sarcoma patients and we present the information they can yield for each individual tumor type.     

Long‐Aliphatic‐Segment Polyamides: Salt Preparation and Subsequent Anhydrous Polymerization

Long‐aliphatic‐segment polyamides were prepared based on hexamethylenediamine and α,ω‐(CH₂)_x biosynthetic diacids (x = 10, 11, 12). The pertinent monomers (salts) were isolated as solids, thoroughly characterized for the first time, and then submitted to an anhydrous melt prepolymerization technique. The obtained prepolymers exhibited in the range of 5 100–11 800 g · mol^?1, and the molecular weight was further increased by up to 55% through solid‐state finishing. The suggested overall polyamidation cycle was conducted at short melt‐reaction times, so as to avoid any thermal degradation, and was proved efficient, indicating similar reactants polymerizability independently of the methylene content.

     

Cornet‐Like Phosphotriazine/Diamine Polymers as Reductant and Matrix for the Synthesis of Silver Nanocomposites with Antimicrobial Activity

The synthesis of silver nanoparticles attached on the surface of a hollow cornet‐like polymer matrix which served as a reductant and host matrix is described. This hybrid organic/inorganic macromolecular matrix is exhibiting anion‐exchange properties, porous structure and hollow morphologies, and absorptions in the visible light region. Due to the anion‐exchange property and the 3D orientation of the macromolecular chains the material is defining a new functional organic/inorganic hybrid. For the synthesis of nanoparticles, no other reducing agents were used and silver nanoparticles with a mean diameter of less than 20 nm were attached on the surface of the polymer, thus inheriting the composite with high antibacterial activity tested in bacterial strains and yeasts.

     

An impact assessment of electricity and emission allowances pricing in optimised expansion planning of power sector portfolios

The present work concerns a systematic investigation of power sector portfolios through discrete scenarios of electricity and CO₂ allowance prices. The analysis is performed for different prices, from regulated to completely deregulated markets, thus representing different electricity market policies. The modelling approach is based on a stochastic programming algorithm without recourse, used for the optimisation of power sector economics under multiple uncertainties. A sequential quadratic programming routine is applied for the entire investigation period whilst the time-dependent objective function is subject to various social and production constraints, usually confronted in power sectors. The analysis indicated the optimal capacity additions that should be annually ordered from each competitive technology in order to substantially improve both the economy and the sustainability of the system. It is confirmed that higher electricity prices lead to higher financial yields of power production, irrespective of the CO₂ allowance price level. Moreover, by following the proposed licensing planning, a medium-term reduction of CO₂ emissions per MW h by 30% might be possible. Interestingly, the combination of electricity prices subsidisation with high CO₂ allowance prices may provide favourable conditions for investors willing to engage on renewable energy markets.     

Experimental investigation of the effects of separate hydrogen and nitrogen addition on the emissions and combustion of a diesel engine

An experimental investigation of the effects of separate hydrogen and nitrogen addition on the emissions and combustion of a diesel engine was performed and the results are presented in the current paper.     

On the performance of two-hop message spreading in DTNs

In this paper, a Delay Tolerant Network environment is considered where the source is in full control of the two-hop spreading mechanism by setting key parameters such as the number of copies allowed to be spread in the network and the delay bound of the messages. The introduced analysis allows for a differentiation between the source of the message and the intermediate nodes (in terms of e.g. transmission power, speed or cooperation degree). Analytical expressions for the cumulative distribution function (cdf) of the delivery delay and the induced overhead are extracted, taking into account the fact that the source node may continue spreading copies after the message delivery. In addition, a fairly accurate approximate expression for the cdf of the delivery delay is also derived and validated through simulations.