Extremely low-loss 1.5%-/spl Delta/ 32-channel athermal arrayed-waveguide grating multi/demultiplexer

A silica-based 1.5%-/spl Delta/ 100 GHz-spacing 32-channel athermal arrayed-waveguide grating (AWG) with compact size and extremely low insertion loss is described. By reducing the fibre coupling loss and the excess loss in a silicone-filled groove, an insertion loss of 1.3 dB was achieved with this athermal AWG.     

Comparison of surgically attached and non-attached repair of the rat Achilles tendon-bone interface. Cellular organization and type X collagen expression

The effects of surgical repair versus non-repair on cell morphology and type X collagen expression were investigated using a rat model of Achilles tendon avulsion. The animals were divided into four groups. In Group 1, tendon was reattached to the original attachment site by suturing through a drill hole in the calcaneus; in Group II, tendon was not reattached and a drill hole was not made; in Group III, tendon was not reattached but a drill hole was made; and the animals in Group IV were sham operated. In Group I (tendon reattached), at 2 weeks postoperatively, many hypertrophic chondrocytes appeared at the reattachment site adjacent to bone and type X collagen was detected immunologically both in the cells and in the extracellular matrix. After 4 weeks, the cells at the original site of attachment were arranged in rows along the newly formed tendon fibers and were stained with type X collagen antibody. By contrast, when tendon was not reattached (Groups II and III), a gap between the original attachment site and the tendon stump was observed through the entire postoperative period. At 8 weeks, the original attachment site was covered by fibrocartilaginous tissue and tendon became attached to the calcaneal fibrocartilage area, which is proximal to the original attachment site. Type X collagen was detected in the cells which were adjacent to bone. In Group IV (sham operation), there were no changes in histology or type X collagen distribution, either at the attachment site or in tendon and bone, compared with the non-operated control rats. These results suggest that surgical reattachment of tendon to the original site is important to help reorganize cells during the repair process. Type X collagen was identified immunohistochemically in the cells adjacent to bone in all the groups, suggesting that it may play a role in maintaining distinct areas of calcified and non-calcified fibrocartilage.     

Compact electrostatic levitator for diffraction measurements with a two axis diffractometer and a laboratory x-ray source

A compact electrostatic levitator was developed for the structural analysis of high-temperature liquids by x-ray diffraction methods. The size of the levitator was 200 mm in diameter and 200 mm in height and can be set up on a two axis diffractometer with a laboratory x-ray source, which is very convenient in performing structural measurements of high-temperature liquids. In particular, since the laboratory x-ray source allows a great amount of user time, preliminary or challenging experiments can be performed with trial and error, which prepares and complements synchrotron x-ray experiments. The present small apparatus also provides the advantage of portability and facility of setting. To demonstrate the capability of this electrostatic levitator, the static structure factors of alumina and silicon samples in their liquid phases were successfully measured.     

Structure Analysis of Molten Ba–Ge Alloys Using Electrostatic Levitation Technique Combined With High-Energy X-Ray Diffraction

High-energy synchrotron X-ray diffraction experiments were performed for clathrate-forming barium–germanium (Ba–Ge) alloys in the liquid state near the eutectic composition. The accurate structure information of highly reactive melts has been obtained by applying electrostatic levitation technique as a containerless method. The structure information obtained from the reverse Monte Carlo simulation suggests that the short-range ordering between the Ge atoms occurs with the addition of Ba atoms in the liquid Ba–Ge alloys. This can be associated with the formation of the cage-like structure composed of the Ge atoms in the liquid alloys near the eutectic composition.     

Observations of bound Tween80 surfactant molecules on single-walled carbon nanotubes in an aqueous solution

The slow diffusion of Tween80 surfactant molecules in a single-walled carbon nanotube (SWCNT) aqueous dispersion was directly observed using the pulsed field gradient nuclear magnetic resonance method. The slow diffusion of Tween80 molecules was attributed to the strongly adsorbed molecules on the SWCNTs in the aqueous dispersion. The amount of bound Tween80 molecules was estimated to be approximately 12% of the total amount of Tween80 molecules, contributing to the stability of the SWCNT aqueous dispersion. Using dynamic light scattering and total organic carbon measurements, this SWCNT/Tween80 aqueous dispersion was found to be very stable for at least 3 weeks. The observed zeta potentials of this SWCNT dispersion are between −10 and 0 mV, indicating that the stability of the SWCNTs in the Tween80 solution was maintained by steric interactions between the small amount of adsorbed Tween80 molecules on the SWCNTs, while the effect of electrostatic interactions between adsorbed Tween80 was minimal. This proposed method to investigate the amount of bound Tween80 molecules on SWCNTs has potential benefits in the field of the production of functional materials and nano-toxicity assessments.     

Cold storage characteristics of mobile HTS magnet

A cold storage system specialized in mobile high-temperature superconducting (HTS) magnets (e.g. for magnetically levitated (maglev) vehicles) has been proposed. In this system, a cooling source is detachable and a HTS coil is capable of maintaining superconducting state with its heat capacity. This system allows a considerably lightweight HTS magnet.An apparatus was constructed to evaluate the possibility of using cold storage systems in maglev vehicles. The thermal characteristic of this apparatus was based on a magnet for previous maglev test vehicles [1]. The operational temperature range of the magnet was assumed from 20 K to 50 K. Some experiments indicated that heat conduction by residual gas was not negligible. Especially over 30 K, gas conduction took a large part of heat input. This phenomenon is attributable to reduction of cryopumping effect. However, activated carbon in the apparatus compensates cryopumping effect. A unique heat capacitor was also used to enhance the cold storage effect. Water ice was chosen as a heat capacitor because water ice has a higher heat capacity than metallic materials at cryogenic temperatures. A small amount of water ice also prolonged cryogenic temperature condition. These results indicate 1 day of cold storage is probable in a magnet for maglev vehicles.     

Compatibility problems in frontal, side, single car collisions and car-to-pedestrian accidents in Japan.

Compatibility problems in car-to-car frontal, side, single car and car-to-pedestrian collisions in Japan are discussed using traffic accident data. The number of serious and fatal injuries is investigated for the subject car and other cars, which are categorized by their class and mass. The aggressivity of the cars is calculated by the number of fatalities, fatality rates and by the number of car registrations. The results show that in car-to-car frontal collisions, cars with a mass of 1150 kg are the most compatible among the current car population. In both car-to-car frontal and side collisions, the sports utility vehicle and mini car are found to be the most incompatible car types with high and low aggressivity, respectively. On the other hand, the accident data show that the wagon and midsize sedan are the most compatible car types. The compatibility of fixed objects in the road environment with cars and cars with pedestrians is also discussed. In a single car collision with a fixed object, the guardrail is the most compatible object and can reduce the fatality rate on prefecture roads by about 60%. The front geometry of the car has large effect on compatibility with a pedestrian.     

Evaluation of additive effects and homogeneity of the starting mixture on the nuclei-growth processes of barium titanate via a solid state route

In an attempt to obtain finest possible microparticles of BaTiO₃ (BT) with highest possible tetragonality via a solid state route, starting mixtures comprising BaCO₃ and TiO₂ were subjected to various pretreatments including addition of glycine and mechanical activation. Reaction processes were monitored by the changes in the weight, crystallinity, and morphology in detail. While mechanical activation with glycine significantly increased the rate of reaction and homogeneity of the particle size of the product, BT, simultaneous particle growth of BT was intolerably acute for micro-electronic devices. The fast particle coarsening was predominated by the coalescence of BT tiny particles formed around titania. A mixture with higher homogeneity was attained by using finer starting materials under wet mixing, avoiding significant mechanical stressing. Particle growth of BT was suppressed to ca. 100 nm to obtain fully crystallized BT particles without significant loss of tetragonality and, hence, close to meet our requirements for MLCCs.     

Nonstationary electron/hole transport in sub-0.1 μm MOS devices:correlation with mobility and low-power CMOS application

We have experimentally studied the high-lateral-field carrier velocity near the source edge in sub-0.1 μm MOSFETs. It is demonstrated that the high-field electron velocity and hole velocity have universal low-field mobility dependence. This shows that the hole velocity is lower than the electron velocity due to the hole's lower mobility. Moreover, we have investigated the low-power CMOS operation using the velocity overshoot. It is verified that there is a most suitable supply voltage for improving the CMOS operation using velocity overshoot. The most suitable supply voltage is shown to be about 1 V. Therefore, the velocity overshoot will be very useful for low voltage CMOS operation in the future     

Verification of the energy-saving effect of the district heating and cooling system—Simulation of an electric-driven heat pump system

A district heating and cooling system (DHC) is expected to be a promising energy-saving measure for high-density business areas in Japan. However, it has not been verified what advantages of the DHC are important for energy conservation. The clarification of this issue is supposed to contribute to improving the energy efficiency of the DHC.