Successive changes in community structure of an ethylbenzene-degrading sulfate-reducing consortium

The microbial community structure and successive changes in a mesophilic ethylbenzene-degrading sulfate-reducing consortium were for the first time clarified by the denaturing gradient gel electrophoresis (DGGE) analysis of the PCR amplified 16S rRNA gene fragments. At least ten bands on the DGGE gel were detected in the stationary phase. Phylogenetic analysis of the DGGE bands revealed that the consortium consisted of different eubacterial phyla including the delta subgroup of Proteobacteria, the order Sphingobacteriales, the order Spirochaetales, and the unknown bacterium. The most abundant band C was closely related to strain mXyS1, an m-xylene-degrading sulfate-reducing bacterium (SRB), and occurred as a sole band on DGGE gels in the logarithmic growth phase that 40% ethylbenzene was consumed accompanied by sulfide production. During further prolonged incubation, the dominancy of band C did not change. These results suggest that SRB corresponds to the most abundant band C and contributes mainly to the degradation of ethylbenzene coupled with sulfate reduction.     

Use of real-time PCR to examine the relationship between ammonia oxidizing bacterial populations and nitrogen removal efficiency in a small decentralized treatment system 'Johkasou'.

The aim of this study was to examine the relationship between ammonia oxidizing bacterial populations and biological nitrogen removal in a small on-site domestic wastewater treatment system "Johkasou". The population dynamics of ammonia oxidizing bacteria (AOB) in six full-scale advanced Johkasous was surveyed using real-time PCR assay over a period of one year. These Johkasous were selected to compare the AOB populations in different treatment performance. When the effluent NH4-N concentration was higher than 2 mg L(-1), it was difficult to meet the effluent standard of advanced Johkasous (T-N 10 mg L(-1)). In contrast, the nitrogen removal efficiency was hardly affected by nitrite oxidation and denitrification in these systems. In other words, ammonia oxidation was a rate-limiting step. Furthermore, we focused on the relationship between NH4-N loading per AOB cell and nitrogen removal. Real time PCR monitoring results demonstrated that it is important to regulate NH4-N loading per AOB cell below 210 pg cell(-1) day(-1) to meet the effluent standard of advanced Johkasou. It is considered that NH4-N loading per AOB cell is a useful parameter for determining suitable nitrogen loading and small decentralized system design.     

High-strength–high-modulus polyimide fibers II. Spinning and properties of fibers

The polyimides based on 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) described in Part I of this series were dissolved in p-chlorophenol and spun into fibers using a coagulating bath of ethanol. The fibers as spun had in general low tenacities and low moduli, but a heat treatment at 300–500°C under tension produced a remarkable increase in strength and modulus, and fibers with a tensile strength of 26 g/den (3.1 GPa) and an initial modulus higher than 1,000 g/den (120 GPa) could be obtained. Thus, the annealed fibers of polyimides are comparable to aramid fibers in mechanical properties. To heating in air and in the saturated steam, the polyimide fibers showed higher resistance than the aramid fibers. The polyimide fibers surpassed the aramid fibers in resistance to acid treatment and ultraviolet (UV) irradiation, but were inferior in resistance to alkali treatment. The annealed fibers of polyimides displayed distinct X-ray diffraction patterns. The chain repeat distance of 20.5 Å determined on the fibers of polyimide prepared from BPDA and o-tolidine, and 20.6 Å determined on the fibers of polyimide derived from BPDA and 3,4′-diaminodiphenyl ether are reasonable when the dimensions of monomeric units and the shapes of the molecular chains are considered. The X-ray reflections of both polyimide fibers were indexed satisfactorily on the basis of postulated unit cells.     

Short‐span seeking control of hard disk drive with vibration suppression PTC

In a short‐span seeking‐mode of hard disk drives, the resonance modes are getting crucial obstruction to meet the demand on high‐speed data access. In this paper, a novel vibration suppression perfect tracking control (PTC) method is proposed based on controllable canonical realization. In the proposed method, it is assumed that the plant is modeled as the rigid and primary resonance mode. By using this model, the feed forward controller is designed with PTC by multirate sampling control in order to suppress the primary vibration. Additionally, the higher‐order resonance vibration is attenuated by using the trajectory MHVT. The proposed method achieved 16% faster seeking than MPVT, a conventional method. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(1): 66–72, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20546     

Relationship between desaturation and chain elongation of palmityl-CoA in rat liver microsomes

The relationship between desaturation and chain elongation of palmityl-CoA was studied in rat liver microsomes. Enzyme activities for desaturation and chain elongation were stimulated by re-feeding starved rats. The activities of desaturation and chain elongation in re-fed rats were four- and twofold greater than those in normal rats, respectively. When a sonicated dispersion of lecithin was added to the incubation medium containing both reactions, chain elongation activity, especially formation of stearic acid, was stimulated and desaturation activity was apparently depressed.     

Reactivity of poly(vinyl chloride) containing N-methyl dithiocarbamate toward metal ions in heterogeneous system and effect of γ-irradiation on the reactivity

The reaction of poly(vinyl chloride) containing N-methyl dithiocarbamate (PMD) with metal ions in a heterogeneous system and the effect of γ-irradiation on the reactivity were studied. PMD powder suspended in aqueous solutions did not show any reactivity toward metal ions. However, the PMD powder suspended in a methyl alcohol solution formed a chelate with various metal ions. The effects of the reaction time, pH, and the initial concentration of the metal ion were examined. PMD irradiated in methyl alcohol with γ-irradiation doses up to 28 Mrad was compared with the original PMD. The reactivity of the irradiated PMD toward the metal ions did not show any apparent decrease.     

Correlation between the hot plate ignition test and other laboratory-scale flammability tests on rubber conveyor belts with fabric skeletons

The hot plate ignition test was conducted on ten different conveyor rubber belts with fabric skeletons. In this test, a 25 × 25 mm² belt sample was placed on a stainless steel plate in an electric furnace and heated. The ‘ignition temperature’ was determined on each sample in almost the same way as proposed in Canada. The test results were compared with those from other laboratory-scale flammability tests (i.e. the small-scale flame tests, the Oxygen Index test and the laboratory-scale gallery test). The calculated results of both sample and rank correlation coefficients imply that the ‘10 signition temperature’ in this hot plate ignition test has a correlation with the results from both the Oxygen Index test and the laboratory-scale gallery test, but that it has very little or no correlation with those from the small-scale flame tests. On the other hand, it is found that the ‘60 s ignition temperature’ in this test has a far better correlation both with the results from the small-scale flame tests and with the time to ignition in the laboratory-scale gallery test than the ‘10 s ignition temperature’.     

Development of double sided linear pulse motor

Several novel design processes have been employed to develop two types of small linear pulse motors (LPM) with high thrust and high reliability. These LPMs are small enough for use in an implantable artificial heart. High thrust force is secured by means of a double-sided structure. A laminated core of cobalt steel plates and a rare earth magnet have been employed as the magnetic materials. One LPM has a two-phase, eight pole, four-coil construction and has been developed with the principal aim of miniaturization. The other has a two-phase, twelve-pole, two-coil construction and has been developed chiefly for ease of manufacture. Both types of LPM can have two to five times better input watt ratio, mass ratio, and volumetric ratio in relation to generated thrust than the conventional LPM