Photoluminescence Analysis of Iron Contamination Effect in Multicrystalline Silicon Wafers for Solar Cells

We investigated the effect of Fe contamination on the electronic properties of dislocation clusters in relation to oxygen precipitation in multicrystalline silicon (mc-Si). Photoluminescence (PL) spectroscopy and mapping were performed at room and liquid-He temperatures on mc-Si wafers before and after Fe contamination. PL spectra consisted of the band-edge emission, the 0.78-eV emission associated with oxygen precipitates, and the dislocation-related D-lines. The Fe contamination increased the electrically active dislocation clusters. Part of these clusters acted as preferential oxygen precipitation sites, and their electronic properties were not further influenced by the Fe contamination.     

Properties of Starch Films and their Improvement

The tensile strengths and elongations of starch films prepared from various unmodified and modified starches were measured. These properties were improved by addition of urea and polyvinyl alcohol to the starch paste. The results obtained were as follows.

• 1 The heating temperature greatly affected the tensile strength and elongation of various unmodified starches. Potato starch gave the best film.
• 2 Introduction of hydroxyethyl groups into corn starch had unexpectedly little affect on the properties of the films.
• 3 A combination of hydroxyethylation and acid-modification slightly improved the properties of the films.
• 4 No film could be obtained after combinations of hydroxyethylation and hypochlorite-oxidation, pyrodextrinization or α-amylase-dextrinization. However, addition of urea to these modified starches resulted in good films.
• 5 On addition of urea the elongation of starch films increased and the pastes adhered uniformly to water repellent surfaces.
• 6 A film with the best properties was prepared from a mixture of 67% acid-modified hydroxyethyl starch, 13% urea and 20% polyvinyl alcohol.

     

Tunable Terahertz Device Using Refractive Index Control

We measured the thermal dependencies of the refractive index and the absorption coefficient of high-resistivity silicon. We found that the refractive index varied slightly with temperature, and the absorption coefficient was very low and remained approximately constant as the temperature was changed. As a result, the conditions for terahertz propagation in silicon could be controlled by changing the refractive index without any absorption loss. As one application of this effect, we developed a terahertz time delay generator that can generate a terahertz time delay by changing the temperature of the medium through which the terahertz beam passes, without the need for any mechanical delay. We demonstrated generation of a terahertz time delay of approximately 6.6 ps.     

Development and Evaluation of a Robust Sandwich Immunoassay System Detecting Serum WFA-Reactive IgA1 for Diagnosis of IgA Nephropathy

Aberrant glycosylation of IgA1 is involved in the development of IgA nephropathy (IgAN). There are many reports of IgAN markers focusing on the glycoform of IgA1. None have been clinically applied as a routine test. In this study, we established an automated sandwich immunoassay system for detecting aberrant glycosylated IgA1, using Wisteria floribunda agglutinin (WFA) and anti-IgA1 monoclonal antibody. The diagnostic performance as an IgAN marker was evaluated. The usefulness of WFA for immunoassays was investigated by lectin microarray. A reliable standard for quantitative immunoassay measurements was designed by modifying a purified IgA1 substrate. A validation study using multiple serum specimens was performed using the established WFA-antibody sandwich automated immunoassay. Lectin microarray results showed that WFA specifically recognized N-glycans of agglutinated IgA1 in IgAN patients. The constructed IgA1 standard exhibited a wide dynamic range and high reactivity. In the validation study, serum WFA-reactive IgA1 (WFA+-IgA1) differed significantly between healthy control subjects and IgAN patients. The findings indicate that WFA is a suitable lectin that specifically targets abnormal agglutinated IgA1 in serum. We also describe an automated immunoassay system for detecting WFA+-IgA1, focusing on N-glycans.     

Theranostic Agent Combining Fullerene Nanocrystals and Gold Nanoparticles for Photoacoustic Imaging and Photothermal Therapy

Developing photoactivatable theranostic platforms with integrated functionalities of biocompatibility, targeting, imaging contrast, and therapy is a promising approach for cancer diagnosis and therapy. Here, we report a theranostic agent based on a hybrid nanoparticle comprising fullerene nanocrystals and gold nanoparticles (FGNPs) for photoacoustic imaging and photothermal therapy. Compared to gold nanoparticles and fullerene crystals, FGNPs exhibited stronger photoacoustic signals and photothermal heating characteristics by irradiating light with an optimal wavelength. Our studies demonstrated that FGNPs could kill cancer cells due to their photothermal heating characteristics in vitro. Moreover, FGNPs that are accumulated in tumor tissue via the enhanced permeation and retention effect can visualize tumor tissue due to their photoacoustic signal in tumor xenograft model mice. The theranostic agent with FGNPs shows promise for cancer therapy.     

Supramolecular morphology of two-step melt-spun poly(dioxanone) fibers

Structure of poly(dioxanone) (PPDX) fibers produced through a two-step melt-spinning process with an additional short-period annealing above the melting temperature of PPDX was investigated and the effect of annealing on the degradation behavior was discussed. The morphological study carried out by etching the fibers using a phosphate or permanganate solution suggested that the fibers take a skin–core structure, and both the skin layer and the core region consist of a bundle of microfibrils. The micro-beam X-ray diffraction analysis revealed that the short-period annealing in the production process only slightly promotes the crystallization in the skin layer but contributes to increasing the packing of amorphous chains near the skin, which seems to be the controlling factor of the hydrolytic degradation behavior of the fibers.     

Inter-comparison of various global sea surface temperature products

In this study, eight global sea surface temperature (SST) products for 2009 are compared to clarify their characteristics. The median of eight daily values, the Ensemble Median as Reference Product (EMRP), is used as a reference product for inter-comparison. The results show that the absolute value of mean differences and the value of root mean square (RMS) differences are higher in single-microwave products such as Advanced Microwave Scanning Radiometer for the Earth observing system (AMSR-E), Tropical Rainfall Measuring Mission Microwave Imager (TMI), and WindSat, than in products such as MicroWave Optimally Interpolated SST (MWOI), Merged satellite and in situ data Global Daily SST (MGD), and Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) constructed by merging several SST data. It is of note that the characteristics of SST products depend on the type of SST used within the product, rather than the data source used. A comparison of SST products was also conducted using EMRP and data observed by moored buoys. The results show that only AMSR-E has a warm bias (+0.06°C) while other products have a cool bias (maximum value ?0.10°C). The RMS error of TMI is the highest (0.57°C), and that of EMRP the lowest (0.28°C). Furthermore, the temporal variability between the data in each SST product was compared to those observed by the Kuroshio Extension Observatory (KEO) buoy. Results show that the temporal variability of EMRP corresponds well to that of buoy data, and that the RMS error of EMRP is lower than that of the other SST products.     

Determination of Thermoelectric Module Efficiency: A Survey

The development of thermoelectrics (TE) for energy conversion is in the transition phase from laboratory research to device development. There is an increasing demand to accurately determine the module efficiency, especially for the power generation mode. For many TE, the figure of merit, ZT, of the material sometimes cannot be fully realized at the device level. Reliable efficiency testing of thermoelectric modules is important to assess the device ZT and provide end-users with realistic values for how much power can be generated under specific conditions. We conducted a general survey of efficiency testing devices and their performance. The results indicated a lack of industry standards and test procedures. This study included a commercial test system and several laboratory systems. Most systems are based on the heat flow meter method, and some are based on the Harman method. They are usually reproducible in evaluating thermoelectric modules. However, different systems often showed large differences that are likely caused by uncertain heat loss and thermal resistance. Efficiency testing is an important capability for the thermoelectric community to improve. A follow-up international standardization effort is planned.