Antioxidant effect of two flavonoids from the bark of Ficus bengalensis Linn in hyperlipidemic rats

Two flavonoid compounds, viz. 5,7-dimethyl ether of leucopelargonidin 3-0-alpha-L rhamnoside and 5,3'-dimethyl ether of leucocyanidin 3-0-alpha-D galactosyl cellobioside obtained from the bark of F. bengalensis were evaluated for their antioxidant action in hyperlipidemic rats. The results were compared with the activity of a structurally similar flavonoid, quercetin, a known antioxidant. The Ficus compounds showed significant antioxidant effects which may be attributed to their polyphenolic nature. The methylation of two hydrozyl groups in the Ficus flavonoids might have slowed down their antioxidant action as compared to quercetin.     

Simulation of wind loading and response of geometrically non-linear structures with particular reference to large antennas

The study of the response of wind-loaded flexible structures generates several problems, related to the collection of significant experimental data and the modelling of the random wind velocity field, fluid-structure interaction and actual structural behaviour. This paper presents some results of recent research on these problems.

The first part of the paper tackles the modelling and simulation of wind velocity and presents the treatment of some direct measurements on the site of an important broadcasting antenna located on Monte Nerone (Appennine Mountains) on the Italia watershed, 1500 m above sea level.

The second part deals with the problem of determining structural response under wind loading. Because of the impracticability of operating in the frequency domain in the presence of non-linearities, simulation and direct step-by-step integration in the time domain have been chosen. Two specific examples are presented, both pertaining to guyed antennas, for which non-linearities have been shown to be significant. The effects of ice formations on the mast and / orthe stays have also been investigated.     

Introduction to computational models of damage dynamics under stochastic actionst

This paper reviews and discusses some basic ingredients necessary for the study of damaged continua with diffused defects like microcracks, pores, dislocations, etc., under stochastic loading histories and, in particular, under sequences of impulses described by Poisson arrival processes. The mechanical model of a continuum with microstructure is adopted: in other words, the state of the continuum is described by the usual displacement field and by an additional field of a second-order non-symmetric tensor which describes the microstructural rearrangement of the material due to the presence of defects. It is shown that the time evolution of this tensor, usually assumed empirically on the basis of experimental results, is governed by a balance equation. The discretization of the problem and integral measures of damage, useful for the numerical solutions, are also discussed.     

Effect of Slaughter Method on Postmortem Changes of Grass Carp (Ctenopharyngodon idella) Stored in Icesti

ABSTRACT: The effect of 2 slaughter methods (immersion in ice-water slurry and electrical stunning followed by ice slurry asphyxiation) on the quality of grass carp ( Ctenopharyngodon idella ) stored in ice for 20 d was evaluated using sensory and chemical analysis. Electricity immediately stunned the fish and did not induce blood spots in the flesh. Fish killed by electricity showed a faster initial rate of ATP degradation and entered into rigor mortis earlier, but did not show significant differences in the sensory score when compared with fish killed by immersion in ice-water slurry. Thus, no differences were observed in the shelf life of carps between the 2 slaughter methods evaluated. The limit for acceptability of grass carp stored in ice was around 13 to 16 d. Grass carp accumulated more inosine than hypoxanthine. K, Ki, P , Fr, and H values were highly correlated with storage time and with the TFRU sensory scores in both groups; these could be used to assess the freshness quality of grass carp.     

Probabilistic methods in plastic structural analysis

The redistribution of stresses in ductile structures, although beneficial from the safety viewpoint, introduces another source of uncertainty, which requires specific methods when the probabilistic approach to reliability evaluation is followed.Practicable procedures have been developed for structures that satisfy the classical assumptions of plastic limit analysis. In particular, two theorems that allow to find rigorous upper and lower bouds on the probability of full plastic collapse under given loads, are presented. Other methods for probabilistic limit analysis are also indicated, including in particular a specifically developed parametric simulation procedure.The last part of the paper is devoted to the reliability analysis of plastic structures subject to loads varying (slowly) in time.It is recalled first that probabilistic limit analysis can be easily extended to the shakedown—incremental collapse problem, provided the loads vary within a finite domain: however, the significance of such an approach for stochastically varying loads is questioned. In fact, as time increases, the probability also increases that the loads cross any given threshold. Therefore, it is more appropriate to speak of “plastic adaption” rather than “shakedown”, and to focus the attention on the probability of reaching, in any given time interval, a certain permanent deformation. Again, only approximate solutions (in the form of upper and lower bounds) can be found to this question, but this appears to be a more rational and promising approach to the problem.     

Effect of thermal cycling and low pressure sandblasting on the bond strength of a self-adhesive cement to Y-TZP zirconia

The aim of this investigation was to assess the influence of several surface treatments on the shear bond strength (SBS) of a self-adhesive resin cement containing 10-methacryloxydecyl-dihydrogenphosphate monomer to densely sintered zirconia ceramic, before and after thermal cycles. Hundred densely sintered zirconia cylinders were divided into five groups (n = 20). Each of them received a different surface treatment: (1) control [No_T], with the zirconia surface unconditioned, (2) low pressure air abrasion [Sand_S], (50 μm, 1 bar), (3) standardized air abrasion [Sand_H], (50 μm, 2.8 bar), (4) standardized Rocatec? Plus (silica-coated alumina oxide) air abrasion (2.8 bar) and silanization [Roc_H], (5) low pressure Rocatec? Plus (silica-coated alumina oxide) air abrasion (1 bar) and silanization [Roc_S]. Five more surface-treated specimens were addressed to scanning electron microscope for qualitative observations. After specimen fabrication, subgroups of 10 bonded samples were stored in water either for 24 h (T1) or subjected to 5000 thermal cycles (T2); SBSs were determined with a universal testing machine at a crosshead speed of 1 mm/min. At T1, mean SBSs (MPa) obtained for the examined groups were: [Sand_H] 16.24 ± 2.95; [Sand_S] 16.01 ± 2.68; [Roc_H] 17.17 ± 1.64; [Roc_S] 15.92 ± 1.99. All surface treatments positively affected (p < 0.05) the initial self-adhesive cement adhesion to zirconia with respect to No_T (13.29 MPa). Artificial aging decreased the bond strength in all test groups significantly, but no spontaneous debonding was observed in [No_T]: at T2, SBS values ranged from 7.76 ± 2.37 (No_T) to 8.89 ± 1.74 (Sand_S), with no statistically significant difference between groups (p = 0.5293). Both air abrasion with alumina oxide and Rocatec? universal bonding system, used with hard or low air pressure, produced comparable effects on cement–zirconia interface before and after thermal cycles. After artificial aging, minimal differences in bond strength values between sandblasted and control groups were not of statistical significance.     

Investigation on the Esterification of Fatty Acids Catalyzed by the H<Subscript>3</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript> heteropolyacid

In this work, the H₃PW₁₂O₄₀ heteropolyacid (HPW) was employed as a homogeneous catalyst to promote the efficient esterification (ethanolysis) of a number of saturated and unsaturated fatty acids (myristic, palmitic, stearic, oleic, and linoleic) under mild reaction conditions. HPW showed a similar activity to those observed for p-toluene sulfonic acid (PTSA) and sulfuric acid (H₂SO₄), the other acidic catalysts we compared them with in this study. In the HPW-catalyzed esterification of stearic acid, the addition of water caused a remarkable decrease in the ethyl stearate yields. On the other hand, the increase in the HPW concentration (up to a maximum value) promoted a proportional improvement in the oleic acid to ethyl oleate conversion. Kinetic measurements using oleic acid as a prototype substrate revealed that the esterification reactions catalyzed by HPW, H₂SO₄, and PTSA are of first-order in relation to the fatty acid concentration. Finally, the catalytic activity of HPW remained unaltered even after several recovery/reutilization cycles whereas the tungsten content in the final product (biodiesel produced by the HPW-catalyzed esterification of oleic acid) was found to be at an acceptably low level (0.0095 mg of W per g of biodiesel).     

Renal Doppler ultrasonography in the diagnosis of acute obstructions of the upper urinary tract

A comparative study of the resistivity indices (RI) obtained in both kidneys has been carried out in 30 controls and 60 patients with suspected unilateral acute obstruction of the upper urinary tract. Doppler findings (difference in the mean RI of both kidneys, delta RI) in the pathologic population have been systematically correlated to the data yielded by intravenous pyelography (IVP). In the control population delta RI was always < or = 0.03 (mean delta RI = 0.01, SD = 0.01). Considering that an increase in delta RI > or = 0.05 (> mean RI + 3 SD) is significant, 93% sensitivity and 100% specificity are obtained for the diagnosis of unilateral acute obstruction. Comparison of the resistivity indices of both kidneys is more specific and more sensitive than the assessment of the index on the obstructed side only; it improves the performance of ultrasonography in the initial diagnosis of acute urinary tract obstruction.