Rubber adhesion and the dwell time effect

In earlier studies of elastomer adhesion it has been found that the level of adhesion rises with increasing contact time for joined surfaces. Physical reasons for this dwell time effect are under debate. This paper describes an experimental study of the effect using the contact of optically smooth rubber surfaces pressed against glass. The study confirms the existence of the effect for a range of vulcanized rubber compounds; surface bloom appears to be strongly linked with it for the particular cases examined.     

Contributing to the sustainable use of stormwater: the role of pervious pavements.

The city of Melbourne, Australia is experiencing a water crisis with potable water storage reservoirs at an all time low. With increasing urbanisation there is an ever increasing need to research and explore sustainable water management initiatives. There is potential to minimise the negative impacts of stormwater runoff and augment dwindling supplies of potable water through adoption of pervious paving technology. The traditional approach to stormwater management has focused on constructing drainage networks to carry stormwater away from developed areas as quickly as possible to avoid the risk of flooding. The main aim of this research project was to establish relationships between rainfall intensity, infiltration rate and pervious pavement runoff and to examine the improvement to stormwater quality after infiltrating through pervious pavements. This paper describes the laboratory experiment set-up to determine the infiltration patterns and stormwater quality improvement for simulated storms precipitating on pervious pavements. Next, the scaling-up of the experimental rig to a field-based trial is explained. Preliminary results from this work are presented to demonstrate the potential benefits of pervious pavements in the Australian landscape.     

Propagation of the photothermal waves in a semiconducting medium under L-S theory

The model of the equations of generalized thermoelasticity based on the Lord–Shulman theory with one relaxation time is used to study the photothermal waves in a semiconducting medium. The exact expressions for the displacement components, temperature, carrier density, and stress components are obtained using normal mode analysis. Numerically simulated results are obtained and presented graphically for silicon to depict the effect of time parameter on the different physical quantities.     

Review and comparison study of hybrid diesel/solar/hydro/fuel cell energy schemes for a rural ICT Telecenter

In this paper, the rural electrification study of an ICT Telecenter in particular reference to the Kelabit Highland of Sarawak is presented. The use of diesel generator and its associated environmental implications is first discussed. The cost-effectiveness of the present solar PV system and the solar/hydro schemes for rural electrification of the rural ICT are evaluated employing the HOMER simulation software, considering sustainability factors such as system efficiency, weather, fuel costs, operating and maintaining costs. Subsequently, simple novel Hybrid Energy Performance Equations and the associated Energy Performance Curves are derived and introduced, respectively, which provide a visualization model, simplifying hybrid system analysis. Results obtained in this study have shown that combined power schemes is more sustainable in terms of supplying electricity to the Telecenter compared to a stand-alone PV system due to prolong cloudy and dense haze periods. The hybrid systems can have efficiency range of ∼15%–75% compared to PV stand-alone of only ∼10%, indicating hybrid systems are more reliable and sustainable – in minimizing both energy losses and excess energy.     

Effect of pre‐germination time of brown rice on serum cholesterol levels of hypercholesterolaemic rats

BACKGROUND: Brown rice is unpolished rice with immeasurable benefits for human health. Brown rice (BR) and pre‐germinated brown rice (PGBR) are known to contain various functional compounds such as γ‐oryzanol, dietary fibre and γ‐aminobutyric acid (GABA). In the present study, the experimental diets containing BR and PGBR (24, 48 h pre‐germination) were used to investigate the influence of pre‐germination time of brown rice on blood cholesterol in Sprague–Dawley male rats. RESULTS: Hypercholesterolaemia and elevation of LDL‐cholesterol were successfully ameliorated by the experimental diets containing BR and PGBR (24 and 48 h pre‐germination). As compared to the control sample, the pre‐germination time had a significant (P < 0.05) effect on blood cholesterol of Sprague–Dawley male rats. It was also found that the significantly (P < 0.05) better effect on lipid profile of hypercholesterolaemic rats was observed by prolonging the pre‐germination time. As compared to non‐germinated brown rice, the germinated brown rice showed the higher cardio‐protective effect on hypercholesterolaemic Sprague–Dawley male rats. CONCLUSION: The present study suggests that the changes of blood cholesterol can be mainly modulated by using the PGBR rather than BR. The prolonging of pre‐germination time led to an increase in the bioactive components, thereby providing a more efficient functional diet affecting the high blood cholesterol. This study suggests that PGBR can be used instead of BR and polished rice in the human diet. Copyright © 2009 Society of Chemical Industry     

Oxidation stability and compositional characteristics of oils from microwave roasted pumpkin seeds during thermal oxidation

The oxidative stability and compositional characteristics of the pumpkin seed oil (PSO) exposed to microwaves were studied during heating at 170°C. The oxidative indices such as free fatty acid (FFA), peroxide value (PV), p-anisidine value (p-AV), TOTOX, specific extinctions and thiobarbituric acid (TBA) value of oils were significantly increased, and the increments were found to be significantly higher (P < 0.05) in unroasted seed oil as compared to roasted seed oil. The relative contents of polyunsaturated fatty acids (PUFAs) were decreased to 84.7%, and saturated fatty acids (SFAs) were increased to 119.5% in unroasted sample, after 9 h of heating. On the other hand, in 12 min roasted samples, the relative contents of PUFAs were decreased to 97.0%, and SFAs were increased to 102.6% after 9 h of heating. The triacylglycerol species LLL and OLL levels were decreased as a consequence of increased heating time, and the reduction tended to be significantly higher in unroasted samples as compared to roasted ones. The oxidation products formed were also investigated by FTIR. The present results indicated that microwave roasting of pumpkin seeds markedly enhanced the oxidative stability of the oils during heating.     

Co-extruded dual-layer hollow fiber with different electrolyte structure for a high temperature micro-tubular solid oxide fuel cell

In this study, the phase inversion-based co-extrusion method was employed to fabricate a structural-improved electrolyte/anode dual-layer hollow fiber (HF) precursor, which was then co-sintered at 1450 °C. The electrolyte structures were thoroughly investigated by varying the loading of electrolyte material (i.e. Yttria-stabilized zirconia, YSZ) with differing particle sizes (i.e. micron, sub-micron, and nano-sized) during suspension preparation. The results showed that the most promising electrolyte layer with thin, dense, gas-tight, and defect-free properties was obtained by mixing 70% submicron-YSZ and 30% nano-YSZ in electrolyte suspension (E-0.7sub0.3nano). This electrolyte formulation co-extruded with a thick nickel-oxide-YSZ (NiO-YSZ) anode layer yielded the highest bending strength of 85 MPa, providing major mechanical strength to the HF. Besides that, the nitrogen permeability value at 2.87 × 10^?6 mol m^?2 s^?1 Pa^?1 suggested that the electrolyte was gas-tight, preventing fuel and oxidant transport. The fiber was then reduced to nickel (Ni)-cermet anode. It was developed to be a complete micro-tubular solid oxide fuel cell (MT-SOFC) by depositing the lanthanum strontium cobalt ferrite (LSCF)/YSZ cathode via brush painting on the dual-layer HF. The cell was fed with hydrogen gas and yielded an open-circuit voltage (OCV) as high as 1.06 V with maximum power density of 0.243 W cm^?2, at 875 °C. Based on this test, it was found that the electrolyte structural-modified dual-layer hollow fiber-based MT-SOFC using mixed particle sizes may result in a promising OCV. However, the relatively low value for power density may be due to a less porous anode; thus, improvements in the anode's structure are required in future research.