Designing a 21st and 22nd century fibre broadband access network

DSL technology has been incredibly successful at allowing copper telephony wires to deliver broadband services. However, the physics of copper dictate that as speeds increase further it will be necessary to push optical fibre closer to the customer — to the cabinet, and ultimately to the premises. Deploying optical fibre to the mass consumer is well known as representing a significant capital investment and will take many years to deploy. It would be fair to say that putting fibre in the residential access network is a ‘once in a century’ investment. There are many different choices of ‘high fibre’ broadband access systems and as technology develops further, this situation is likely to continue. When operators deploy fibre in the access network, it is therefore vital that they do so in a future-proof manner which can support technologies and architectures yet to come, and allow migration and further evolution.     

Constructing The Non-stop,Self-healing T1 Network

Automatic protection switching that is integrated into a sensible backup scheme will keep T1 lines functioning even in the face of disaster.     

Readout circuit for CMOS active pixel image sensor

The design and simulation results of a new readout circuit for a CMOS active pixel image sensor are presented. This scheme removes the fixed pattern noise and reduces the signal degradation while offering an increase in readout speed, compared with the conventional approach     

Integrated Q-switched multiple-cavity glass waveguidelaser

A novel Q-switching scheme, using rapid variation of the path difference between the cavities of a multiple-cavity resonator, is described. A thermooptic phase modulator was used to switch the cavity loss of a Y-junction glass waveguide laser between high and low states. Q-switched pulses with durations of 5 μs and peak powers of 70 mW were obtained     

Measurement of synovial lining volume by magnetic resonance imaging of the knee in chronic synovitis

OBJECTIVES: Current methods of monitoring chronic synovitis in a single joint rely on clinical examination derived indices, such as the detection of synovial thickening. This study aimed to develop a reproducible method for quantifying the volume of synovial lining in chronic synovitis using contrast enhanced magnetic resonance (MR) imaging. METHODS: The knees of 18 patients with chronic synovitis were examined (34 studies). A 2D T1 weighted FLASH sequence was used to evaluate the temporal enhancement of synovial structures after intravenous contrast. Synovial lining volume was calculated from subtraction of pre and post-enhancement 3D T1 weighted MP RAGE images with thresholding and pixel counting. Eleven patients were examined before and after intra-articular glucocorticoid (mean interval 14 weeks) and MR data compared with changes in clinical examination derived indices of disease activity. RESULTS: Synovial lining volume varied from 52-267 ml. The coefficient of variation in volume calculation was 3.5% for a single observer and was 3.8% for two observers. Synovial lining volume was quantified in all patients where synovial lining thickening could not be detected clinically. A decrease in synovial lining volume of > 40% was associated with an improvement in synovial lining thickening, detected clinically. Decreases in synovial lining volume were quantified by MR in two of three patients where changes in clinical examination derived indices were inconsistent. CONCLUSIONS: A reproducible method of estimating the volume of synovial lining in patients with chronic synovitis has been developed. MR measurement of synovial lining volume may quantify changes in chronic synovitis that remain unidentified by clinical measures.     

Stochastic simulation of weather data using higher order statistics

This paper presents ARMA models of the weather parameters: ambient temperature, humidity and clearness index recorded at or near Marrakech. The identification of the model parameters is based on Higher Order Statistics (cumulants). Comparison between the statistical characteristics of the measured data and the data generated using the models has been performed, and the results show that the weather parameters can be predicted with acceptable accuracy.     

Determination of dopexamine hydrochloride in human blood by high-performance liquid chromatography with electrochemical detection

A method is described for the determination of dopexamine hydrochloride at concentrations of 5 to 100 ng/ml in human blood using electrochemical detection. The method uses a Hypersil ODS column and a mobile phase containing heptane sulphonate, orthophosphoric acid, diisopropylamine and disodium EDTA. Blood samples are stabilised immediately after collection by the use of dipotassium EDTA and a high concentration of sodium metabisulphite. The sample preparation procedure consists of a simple de-proteinisation with perchloric acid. The method is accurate, with inter-assay accuracies ranging from 100 to 104%, and is free of interference by blood from different individuals. Known and potential metabolites of dopexamine hydrochloride and a wide range of drugs do not interfere with the method. The method is precise with inter-assay coefficients of variation of 10.6% at 5 ng/ml and of less than 4.2% at higher concentrations. Stabilised blood samples may be stored for over six months at -25 degrees C prior to analysis.     

Specific sleepiness symptoms are indicators of performance impairment during sleep deprivation

Drivers are not always aware that they are becoming impaired as a result of sleepiness. Using specific symptoms of sleepiness might assist with recognition of drowsiness related impairment and help drivers judge whether they are safe to drive a vehicle, however this has not been evaluated. In this study, 20 healthy volunteer professional drivers completed two randomized sessions in the laboratory – one under 24 h of acute sleep deprivation, and one with alcohol. The Psychomotor Vigilance Task (PVT) and a 30 min simulated driving task (AusEdTM) were performed every 3–4 h in the sleep deprivation session, and at a BAC of 0.00% and 0.05% in the alcohol session, while electroencephalography (EEG) and eye movements were recorded. After each test session, drivers completed the Karolinska Sleepiness Scale (KSS) and the Sleepiness Symptoms Questionnaire (SSQ), which includes eight specific sleepiness and driving performance symptoms. A second baseline session was completed on a separate day by the professional drivers and in an additional 20 non-professional drivers for test–retest reliability. There was moderate test–retest agreement on the SSQ (r = 0.59). Significant correlations were identified between individual sleepiness symptoms and the KSS score (r values 0.50–0.74, p < 0.01 for all symptoms). The frequency of all SSQ items increased during sleep deprivation (χ² values of 28.4–80.2, p < 0.01 for all symptoms) and symptoms were related to increased subjective sleepiness and performance deterioration. The symptoms “struggling to keep your eyes open”, “difficulty maintaining correct speed”, “reactions were slow” and “head dropping down” were most closely related to increased alpha and theta activity on EEG (r values 0.49–0.59, p < 0.001) and “nodding off to sleep” and “struggling to keep your eyes open” were related to slow eye movements (r values 0.67 and 0.64, p < 0.001). Symptoms related to visual disturbance and impaired driving performance were most accurate at detecting severely impaired driving performance (AUC on ROC curve of 0.86–0.91 for detecting change in lateral lane position greater than the change at a BAC of 0.05%). Individual sleepiness symptoms are related to impairment during acute sleep deprivation and might be able to assist drivers in recognizing their own sleepiness and ability to drive safely.     

Degradation of polymer electrolyte membranes

One of the predominant failure modes of polymer electrolyte membrane (PEM) fuel cells is the degradation of the PEM, especially when the fuel cell is used for transportation applications. Numerous studies have been carried out regarding this issue but many aspects of the degradation are not yet understood. This paper reviews the available literature regarding membrane degradation, and attempts to classify the degradation modes into three categories: mechanical, thermal and chemical/electrochemical. The factors that contribute to each mode are discussed, along with detailed mechanisms for some degradations. Some possible mitigation strategies are also explored.     

进化的建筑——采访柯里斯·威尔金森和吉姆·艾尔

与柯里斯·威尔金森和吉姆·艾尔的访谈围绕9个问题展开,从对“进化的建筑”的解释,到他们对设计理论和方法的阐述,以及时下建筑的发展方向的泛泛讨论,直至他们对中国的一些看法,比较全面地展现了威尔金森·艾尔的设计世界。