彩色显像管电子束亮度分布自动测量系统

电子束轮廓的描述是彩色显像管特性检测中的难点之一。采用光电转换与计算机信息处理技术，通过自动调整边界条件和三次样条拟合的方法建立了电子束轮廓自动测量系统。与传统测量方法相比，该系统精度高，测试速度快，极大地减轻了测试人员的工作强度，并增加了对排列率和并列率等的测试功能。     

光纤传感器的标定曲线拟合与误差分析

本文介绍了一种求取实际光纤传感器标定曲线及函数的有效方法。以压电式光纤电压传感器实测数据为例，详细患解出了其标定函数和曲线，并进行了误差分析。     

方波扫描路径确定声源声功率误差特性分析

改进了矩形测量面方波扫描路径测量声功率的误差模型 ,以单极子、偶极子及四极子声源为例 ,给出了扫描方向、测量面离声源的距离及扫描线的密度的选取对理论误差的分布图形。分析结果表明 :对选定的测量面 ,在扫描线密度小的情况下 ,通过调整声源离测量面的距离 ,可以在声源近处找到一个最优点或较优点 ,使理论误差为零或很小 ;在绝大多数情况下 ,沿测量面长边扫描误差比沿短边扫描小。     

降低雷达接收机中噪声的几种方法

噪声是影响雷达接收机灵敏度的重要因素。本文通过讨论雷达接收机噪声的来源，分析并提出了集中降低雷达接收机内部和外部噪声的几种方法，具有一定的实际意义。     

The incidence and characteristics of the clinical picture of recurrent myocardial infarct in the rural population

As many as 3033 patients with myocardial infarction residing in rural areas were kept under observation. In this population, myocardial reinfarction (MRI) was diagnosed in 411 subjects, with 78.8% having had it for 4 years. Those MRI patients ranging between 51 to 60 years showed the greatest prevalence (44.3%). The ratio of micro- to macrofocal (through-and-through) MRI was 1:3, that of males to females 9:1. Microfocal MRI was commonly associated with a pain-free variant of the disease (23.5%) with low frequency of thromboembolic complications (3.1%). Every fifth patient with macrofocal (through-and-through) renecrosis presented with aneurysm of the heart. In a 10-year and longer follow-up, mortality from MRI was 43.6 percent among patients with macrofocal MRI, while deaths attributable to microfocal MRI were estimated to be 28.9 percent. High mortality rates suggest great severity of illness and low efficacy of the drug therapy adopted.     

Effect of Traveling Magnetic Field on Mould-Filling Length of the A357 Melt during Casting THin Walled Plate

In order to improver the mould filling ability ,the method for production of thin-walled castings in the traveling magnetic field was applied,The relationship between magnetic field density and input voltage as well as distance was investigated,and the mould filling length of A357 melt has been studied,The electromagnetic forces applied on the melt were also analyzed,The result shows that the mould-filling length of the melt increase rapidly with the increase of magnetic flux density,The mould filling lengths in gypsum upper mould and magnetic material upper mould were compared from the standpoint of application,It demonstrated that the steel upper mould is superior to gypsum mould.     

爆破时差对地震效应的影响

通过对一次爆炸量为65t的硐室大爆破地震效应的实测,得出了一些有价值的结论。     

空爆毁伤地面机动目标扫描准则研究

文中主要针对多爆炸成型弹丸空爆战斗部,在分析区域识别和占空比识别两种不同扫描准则的基础上,应用蒙特卡洛方法计算了战斗部对目标的毁伤概率.通过仿真计算结果对比分析,获得了不同扫描准则对毁伤概率的影响,结果可为多爆炸成型弹丸空爆战斗部设计和选择使用扫描准则提供参考依据.     

浅谈软弱地基应用干振法加固施工技术

分析了软弱地基干振法的加固原理及承载力特点，介绍了加固施工过程的程序及有关注意事项，对施工中的疑难问题提出了处理措施，总结了该施工技术的诸多优点。     

工程制图精品课程建设的探索与实践

论述了为培养高素质人才,全面提升高等教育教学质量,必须积极推进和实施工程制图精品课程建设及其建设目标。从加强师资队伍建设、教学内容与课程体系、教学方法与手段、教材与教学资源、实践教学、教学效果等方面探索了工程制图的教学改革和课程建设实践。总结了制图精品课程建设的特色和所取得的成果,并提出了进一步应探讨和研究的一些问题。