基于时间序列分析的DNS服务器的DDoS攻击检测

分析了针对DNS服务器DDoS攻击的特征,提出了一种基于攻击流特征(AFC)时间序列的DDoS攻击检测方法.通过自适应自回归模型的参数拟合,将AFC时间序列变换为多维空间内的自适应自回归AAR模型参数向量序列,然后使用支持向量机进行分类.实验结果表明,该方法能有效检测针对DNS服务器的DDoS攻击.     

Morphology,crystal structure and hydration of calcined and modified anhydrite

The effects of calcination and modification on the morphology （shapes and textures） and crystal structure of anhydrite powders were studied. The results show that, calcination at 100℃ causes anhydrite to disintegrate into smaller crystals, accompanied by a slight in- crease in d-spacing. Without calcination and modification, the solidification time and curing time of anhydrite are 15 and 77 h, respectively. After the treatment, however, the solidification time and curing time are shortened significantly to 9.5 and 14 rain, respectively. The com- pressive and flexural strengths of hydration products made from the treated anhydrite reach 10.2 and 2.0 MPa, respectively. The much shorter solidification and curing time make it possible to use anhydrite as a building and construction material.     

纳米金修饰的微柱型微流控芯片用于循环肿瘤细胞检测

设计并制作了微柱型聚二甲基硅氧烷(PDMS)微流控芯片,并在通道表面组装纳米金,固定上皮细胞粘附因子(EpCAM)抗体后用于循环肿瘤细胞(Circulating Tumor Cell,CTC)检测。结果表明,纳米金成功组装在γ-氨丙基三乙氧基硅烷硅烷化的PDMS微柱表面,EpCAM抗体功能化的微流控芯片能有效捕获全血中的模型CTCs,当流速小于40μL/min时,捕获效率大于90%。建立一种简单廉价、捕获效率高的CTCs检测新方法,有望为全血中CTCs的分离提供新的策略。     

基于四元数MUSIC算法的声矢量传感器阵列二维波达角估计

利用声矢量传感器导向矢量和四元数之间的相似性,推导并建立了以四元数形式表示的导向矢量,给出了声矢量传感器阵的四元数模型,理论分析了导向矢量与噪声子空间的正交性,在此基础上提出了基于四元数MUSIC空间谱的二维波达角估计方法。仿真实验表明,四元数MUSIC算法的分辨力要优于矢量MUSIC算法,在低信噪比下具有较高的DOA估计精度,验证了四元数的正交性优势,同时本文方法不局限于L线阵和面阵,对其他阵型也具有普遍适用性。     

我国宏观经济与证券市场关系的实证分析--基于名义 GDP 和上证指数发展速度的视角

宏观经济和证券市场的关系一直受到人们的关注,由于数据的选取和研究方法上的不同,导致宏观经济与证券市场的关系存在不同的结论或解释。从名义 GDP 和上证指数发展速度的视角,运用 HP 滤波以及 SVAR 等方法实证研究了宏观经济和证券市场的关系。研究发现：宏观经济和证券市场存在显著的因果关系;短期证券市场的波动是经济偶然性波动的预期,两者之间的滞后期效应与当期效应相互影响;方差分解表明宏观经济对于证券市场的长期贡献度很大。     

油田站外单管集油辅助工艺对比

为了解决部分油井无法单管输送的问题,采用PIPESIM模拟软件对不同含水率、不同集输半径和不同产液量油井的集输管线进行计算分析,同时结合各油田单管集输设计经验,得出中质原油站外系统单管集油工艺改造的技术界限,而对于达不到技术界限的油井,可以通过辅助措施实现单管集油,通过对比电磁加热器、空气源热泵、管道内置电伴热、井口气电加热器、油井保温隔热油管、地热、太阳能光热技术及井口加药等单管辅助措施的原理及工艺特点,最终确定在不同工况条件下的辅助单管集输措施,为油田站外单管集输工艺选择和优化提供了理论依据。     

神经网络迭代算法在风机振动报警值中的应用

提取旋转机械D350风机转子在一段时间里的水平方向、垂直方向和轴向的振动值,以此为样本值,应用BP神经网络迭代算法进行训练,然后对D350风机的振动报警值进行预测,预测结果表明与实际报警值非常接近。     

光纤声发射传感技术的进展

介绍光纤声发射传感技术的研究现状和最新进展。综述和评价了基于强度调制、相位调制、波长调制、偏振调制和一些新型调制原理的光纤声发射传感技术，介绍了应用实例，最后提出了目前光纤声发射传感技术研究中急需解决的问题和发展趋势。     

Development of magnesium composite alloy by a new method combining B2O3 addition and melt stirring

For developing high performance magnesium alloys, a new method in combination of B2O3 addition and melt stirring was applied. When 0.3%, 6% and 12%（ mass fraction） B2O3 was added into pure Mg, many twins were produced in each alloy. The average grain size of Mg was about 200 μm. In Mg-6Al alloy, the grain size is decreased from 50 to 35 μm by B2O3 addition. In Mg-6RE （rare earth） alloys, the grain size is decreased from 35 to 15 μm. The grain size of Mg-9Al- 6Ti-3B2O3 alloy is about 5 μm. The hardness of pure Mg does not change by B2O3 addition. In Mg-6Al alloy, the hardness is increased by addition of 3% B2O3, however, the hardness of Mg-6RE alloy is decreased by B2O3 addition. Addition of B2O3 into Mg-Al, Mg-RE and Mg-Al-Ti alloys makes the fine grain structures, the hardness of Mg-RE alloy is decreased. This strange behavior may be interpreted with existence of many fine pores in the alloy. The mechanical properties of composite Mg-9Al-6Ti with 3?O3 are higher than those of AZ91C. The present results demonstrate the potential of this new method for developing high performance magnesium alloys.