Densification characteristics of chromia/alumina castables by particle size distribution

The quality of the refractories applied on integrated gasification combined cycle should be a key factor that affects both the reliability and the economics of gasifier operation. To enhance the workability of chromia/alumina castables, three types of ultrafine alumina powder were added to improve the workability. Densification behavior of such castables in the presence of ultrafine alumina was assessed through the measurement of parameters like flow value, viscosity, bulk density, apparent porosity, and microstructure evaluation by an SEM study. It's proved that the specific surface area and particle size distribution of ultrafine powders in matrix parts greatly influence the densification behavior of these castables.     

Carbon-coated iron oxide nanoparticles as contrast agents in magnetic resonance imaging

Coprecipitated ferrite nanoparticles were coated with carbon using a hydrothermal method. From transmission electron microscope pictures, we could see that the coated iron oxide nanoparticles were spherical in shape with an average diameter of 90 nm. The strong bonding of carbon on the nanoparticle surfaces was checked by noting the C = O and C = C vibrations in Fourier transform infrared spectra. The spin-lattice relaxation process [T ₁] and spin-spin relaxation process [T ₂] relaxivities of hydrogen protons in the aqueous solution of coated nanoparticles were determined to be 1.139 (mM·s)^-1 and 1.115 (mM·s)^-1, respectively. These results showed that the carbon-coated iron oxide nanoparticles are applicable as both T ₁ and T ₂ contrast agents in magnetic resonance imaging.     

Synthesis and optical characterization of novel Sr3Ga2O6:Eu phosphor

Alkaline earth metal gallets have been identified as an important ceramic material. The crystal chemistry of many of these gallets is well explored; however, very rare studies regarding optical properties of rare earth (RE) ions doped in such gallets, particularly in Sr₃Ga₂O₆ host, have been carried out. The present study reports on synthesis and characterization of novel Sr₃Ga₂O₆:Eu³⁺ phosphors. The phosphors have been synthesized using a conventional solid state reaction method. Crystal structure, morphology and luminescence properties (excitation, emission and CIE coordinate) of these phosphors have been studied as a function of sintering temperature and Eu³⁺ concentration. X-ray diffraction study reveals that the phosphor sintered at low temperature (900 °C) contains an impurity phase which is removed at higher sintering temperatures and results into cubic crystalline phase of Sr₃Ga₂O₆. Particle size of the phosphor increases with an increase in sintering temperature which results to a red shift in the peak position of excitation band lying in a broad range from 250 to 370 nm. Optimum emission intensity is attained for 0.12 mol% concentration of Eu³⁺ ions; above this concentration, a quenching in emission intensity is observed.     

Adsorption of cationic cetylpyridinium chloride on pyrite surface

Adsorption of cetylpyridinium chloride (CPC), a cationic surfactant, on pyrite surface was investigated in its suspension. Maximum adsorption capacity of pyrite for CPC was 357 mmol kg^?1 in pyrite suspension (4 g L^?1) at pH 7 equilibrated with CPC (0.1–1.8 mmol L^?1). As CPC adsorption proceeded in the suspension at pH < 7, zeta potential (ζ) of pyrite surface showed increasing positive values (i.e. 5–18.5 mV at pH 5 and 8.12–26 mV at pH 6). However, at pH ≥ 7, it changed from negative to positive value (i.e. ?5 to 36 mV at pH 7, ?10 to 30 mV at pH 8, and ?15 to 20 mV at pH 9), indicating three different iso-electric points at each pH. Adsorption isotherms at suspension pH 5 and 7 with NaCl (0.01 and 0.1 M) showed a decreasing pattern in CPC adsorption capacity. Zeta potential of pyrite surface changed from positive to negative value by the addition of NaCl (21 to ?16 mV at pH 5 and 5 to ?22 mV at pH 7). This study provides basic understanding of the adsorption mechanism of cationic surfactant on pyrite surface at different pH conditions when surfactant wastewater and contaminated groundwater need to be treated by the reactive iron sulfide.     

One-step metal electroplating and patterning on a plastic substrate using an electrically-conductive layer of few-layer graphene

Few-layer graphene (FLG) was investigated as an electrically-conductive interleaf layer for one-step electroplating and patterning of metal on nonconductive polymer substrates without using multiple and toxic pretreatment processes in traditional electroplating. An individual FLG (5–10 nm of thickness with 6.4% of oxygen content) was obtained by expanding graphite with microwave followed by exfoliating the expanded graphite with sonication in N-methyl-pyrrolidone. Stacking FLG in the in-plane direction, a robust FLG film was obtained by the vacuum-assisted filtering and drying methods, and transferred to a polyethylene terephthalate (PET) substrate via an intermediate transfer to the water surface. The sheet resistance of the FLG film on the PET substrate was 0.9 kΩ/sq with a thickness of 80 nm and the root-mean-square roughness of 29 nm. In the electroplating of nickel on the FLG film, hemisphere-shape metal seeds appeared in the early stage of electroplating and they subsequently grew up to 200–480 nm, which became connected to form a continuous nickel layer. The thickness of the continuous nickel layer increased linearly with electroplating time. The developed electroplating method demonstrated its capability of selective patterning on nonconductive substrates using a simple masking technique.     

Electrohydrodynamic instabilities of polymer thin films: Filler effect

The influence of various nanoparticles with different dimension, density, dielectric constant, and surface property on electrohydrodynamic (EHD) instabilities of polymer/nanoparticle nanocomposite thin films was examined as a function of nanoparticle concentration. Transmission electron microscopy (TEM) images of polystyrene (PS)/nanoparticles (NPs) thin films demonstrated that all the nanoparticles were uniformly distributed in polymer matrix and the homogeneous dispersions of nanoparticles were not affected by thermal annealing above glass transition temperature. Optical microscopy (OM) observations indicated that thin films of polystyrene containing silica (SiO₂), gold (Au), cadmium selenide (CdSe), and titania (TiO₂) nanoparticles showed electrohydrodynamic instability patterns similar to those seen in pure polystyrene, up to 3 vol% nanoparticles. The presence of nanoparticles changed the dielectric constant of the thin films, which led to systematic variations in the wavelengths of the surface instabilities, which were consistent with calculated values. Cross-sectional transmission electron microscopy (TEM) images showed that migration or aggregation of the nanoparticles occurred only for silica contrary to other nanoparticles. This work points to a simple route to reduce the scale of final well-ordered columnar structures.     

Effects of oxyfluorination on a multi-walled carbon nanotube electrode for a high-performance glucose sensor

A glucose sensor electrode was prepared with multi-walled carbon nanotubes (MWNTs) because of its effect on surface modification through oxyfluorination. The oxyfluorination of MWNTs was carried out with F₂:O₂ ratios of 7:3, 5:5 and 3:7, which are labeled F7O3-MWNT, F5O5-MWNT, and F3O7-MWNT, based on the oxyfluorination conditions. The hydrophilic functional groups were introduced effectively on the hydrophobic carbon surface. In addition, the amorphous area of the MWNTs was affected by oxyfluorination. The reactivity of the glucose sensor was affected by the oxyfluorination treatment and the existence of amorphous on MWNTs. The optimum O/F percentage was approximately 50%. Therefore, the oxyfluorination conditions are important with amorphous MWNTs. The sensitivity was improved based on the effects of improved interface affinity between the enzyme and the carbon electrode. In addition, the presence of an amorphous area on MWNTs seems to be beneficial for efficient glucose oxidase immobilization, which results in high-performance glucose sensing.     

Brief Review of Precipitated Iron-Based Catalysts for Low-Temperature Fischer–Tropsch Synthesis

Topics in Catalysis - Fischer–Tropsch synthesis (FTS) is a promising way to produce clean liquid fuels and high value-added chemicals from low-value carbon-containing resources such as coal,...     

Graphene transfer: key for applications

The first micrometer-sized graphene flakes extracted from graphite demonstrated outstanding electrical, mechanical and chemical properties, but they were too small for practical applications. However, the recent advances in graphene synthesis and transfer techniques have enabled various macroscopic applications such as transparent electrodes for touch screens and light-emitting diodes (LEDs) and thin-film transistors for flexible electronics in particular. With such exciting potential, a great deal of effort has been put towards producing larger size graphene in the hopes of industrializing graphene production. Little less than a decade after the first discovery, graphene now can be synthesized up to 30 inches in its diagonal size using chemical vapour deposition methods. In making this possible, it was not only the advances in the synthesis techniques but also the transfer methods that deliver graphene onto target substrates without significant mechanical damage. In this article, the recent advancements in transferring graphene to arbitrary substrates will be extensively reviewed. The methods are categorized into mechanical exfoliation, polymer-assisted transfer, continuous transfer by roll-to-roll process, and transfer-free techniques including direct synthesis on insulating substrates.     

Determination of atomistic deformation of tricalcium silicate paste with high-volume fly ash

We examined the effect of incorporating high-volume fly ash on the atomic arrangement and interatomic deformation behavior of calcium silicate hydrates in tricalcium silicate paste upon exposure to external forces. The interatomic structural changes and strains under compressive load were assessed using synchrotron in situ high-energy X-ray scattering-based atomic pair distribution function analysis. Three different types of strains, which were (a) macroscopic strains from gauges on the surfaces of specimen, (b) strains in a reciprocal space (Bragg peak shift), and (c) strains in real space (PDF peak shift), were compared to each other. All monitored and calculated strains for tricalcium silicate-fly ash (50 wt% fly ash) paste were compared with the counterparts of the pure tricalcium silicate paste. Pair distribution function analysis in the range of r < 10 Å indicated that the atomic arrangement of tricalcium silicate-fly ash was similar to that of synthetic calcium silicate hydrates followed by that of pure tricalcium silicate paste. Moreover, the pair distribution function refinement results revealed that the calcium silicate hydrate structure in tricalcium silicate-fly ash paste was similar to tobermorite 11 Å, unlike that in pure tricalcium silicate paste. The interatomic strain of tricalcium silicate-fly ash in the real space (r < 20 Å) was smaller than that of tricalcium silicate under compression, which suggested that the incompressibility of calcium silicate hydrates at atomistic scale was enhanced by the incorporation of fly ash into it. This was likely to be caused by the increased silicate polymerization of calcium silicate hydrates, which was attributed to the increase in the amount of silicate in their structure via the addition of fly ash.