Dieldrin in fish and shellfish from the Mersey Estuary and Liverpool Bay

OBJECT: The authors studied the reliability of a new method for noninvasive assessment of cerebral perfusion pressure (CPP) in head-injured patients in which mean arterial blood pressure (ABP) and transcranial Doppler middle cerebral artery mean and diastolic flow velocities are measured. METHODS: Cerebral perfusion pressure was estimated (eCPP) over periods of continuous monitoring (20 minutes-2 hours, 421 daily examinations) in 96 head-injured patients (Glasgow Coma Scale score < 13) who were admitted to the intensive care unit. All patients were sedated, paralyzed, and ventilated. The eCPP and the measured CPP (ABP minus intracranial pressure, measured using an intraparenchymal microsensor) were compared. The correlation between eCPP and measured CPP was r=0.73; p < 10(-6). In 71% of the examinations, the estimation error was less than 10 mm Hg and in 84% of the examinations, the error was less than 15 mm Hg. The method had a high positive predictive power (94%) for detecting low CPP (< 60 mm Hg). The eCPP also accurately reflected changes in measured CPP over time (r > 0.8; p < 0.001) in situations such as plateau and B waves of intracranial pressure, arterial hypotension, and refractory intracranial hypertension. A good correlation was found between the average measured CPP and eCPP when day-by-day variability was assessed in a group of 41 patients (r=0.71). CONCLUSIONS: Noninvasive estimation of CPP by using transcranial Doppler ultrasonography may be of value in situations in which monitoring relative changes in CPP is required without invasive measurement of intracranial pressure.     

Polymer-graphene nanocomposites as ultrafast-charge and -discharge cathodes for rechargeable lithium batteries

Electroactive polymers are a new generation of "green" cathode materials for rechargeable lithium batteries. We have developed nanocomposites combining graphene with two promising polymer cathode materials, poly(anthraquinonyl sulfide) and polyimide, to improve their high-rate performance. The polymer-graphene nanocomposites were synthesized through a simple in situ polymerization in the presence of graphene sheets. The highly dispersed graphene sheets in the nanocomposite drastically enhanced the electronic conductivity and allowed the electrochemical activity of the polymer cathode to be efficiently utilized. This allows for ultrafast charging and discharging; the composite can deliver more than 100 mAh/g within just a few seconds.     

Water-soluble MnO nanocolloid for a molecular T1 MR imaging: a facile one-pot synthesis, in vivo T1 MR images, and account for relaxivities

A facile one-pot synthesis of a water-soluble MnO nanocolloid (i.e., D-glucuronic acid-coated MnO nanoparticle) is presented. The MnO nanoparticle in the MnO nanocolloid was coated with a biocompatible and hydrophilic D-glucuronic acid, and its particle diameter was nearly monodisperse and ranged from 2 to 3 nm. The average hydrodynamic diameter of the MnO nanocolloid was estimated to be 5 nm. The MnO nanoparticle was nearly paramagnetic down to T=3 K. The MnO nanocolloid showed a high longitudinal water proton relaxivity of r1=7.02 s(-1) mM(-1) with the r2/r1 ratio of 6.83 due to five unpaired S-state electrons of Mn(II) ion (S=5/2) as well as a high surface to volume ratio of the MnO nanoparticle. High contrast in vivo T1 MR images were obtained for various organs, showing the capability of the MnO nanocolloid as a sensitive T1 MRI contrast agent. The suggested three key-parameters which control the r1 and r2 relaxivities of nanocolloids (i.e., the S value of a metal ion, the spin structure, and the surface to volume ratio of a nanoparticle) successfully accounted for the observed r1 and r2 relaxivities of the MnO nanocolloid.     

Fracture mechanics modelling of constant and variable amplitude fatigue behaviour of field corroded 7075‐T6511 aluminium

For ageing airframe structures, a critical challenge for next generation linear elastic fracture mechanics (LEFM) modelling is to predict the effect of corrosion damage on the remaining fatigue life and structural integrity of components. This effort aims to extend a previously developed LEFM modelling approach to field corroded specimens and variable amplitude loading. Iterations of LEFM modelling were performed with different initial flaw sizes and crack growth rate laws and compared to detailed experimental measurements of crack formation and small crack growth. Conservative LEFM‐based lifetime predictions of corroded components were achieved using a corrosion modified‐equivalent initial flaw size along with crack growth rates from a constant K_max‐decreasing ΔK protocol. The source of the error in each of the LEFM iterations is critiqued to identify the bounds for engineering application.     

Identification and Characterization of PSEUDO-RESPONSE REGULATOR (PRR) 1a and 1b Genes by CRISPR/Cas9-Targeted Mutagenesis in Chinese Cabbage (Brassica rapa L.)

The CRISPR/Cas9 site-directed gene-editing system offers great advantages for identifying gene function and crop improvement. The circadian clock measures and conveys day length information to control rhythmic hypocotyl growth in photoperiodic conditions, to achieve optimal fitness, but operates through largely unknown mechanisms. Here, we generated core circadian clock evening components, Brassica rapa PSEUDO-RESPONSE REGULATOR (BrPRR) 1a, 1b, and 1ab (both 1a and 1b double knockout) mutants, using CRISPR/Cas9 genome editing in Chinese cabbage, where 9–16 genetic edited lines of each mutant were obtained. The targeted deep sequencing showed that each mutant had 2–4 different mutation types at the target sites in the BrPRR1a and BrPRR1b genes. To identify the functions of BrPRR1a and 1b genes, hypocotyl length, and mRNA and protein levels of core circadian clock morning components, BrCCA1 (CIRCADIAN CLOCK-ASSOCIATED 1) and BrLHY (LATE ELONGATED HYPOCOTYL) a and b were examined under light/dark cycles and continuous light conditions. The BrPRR1a and 1ab double mutants showed longer hypocotyls, lower core circadian clock morning component mRNA and protein levels, and a shorter circadian rhythm than wildtype (WT). On the other hand, the BrPRR1b mutant was not significantly different from WT. These results suggested that two paralogous genes may not be associated with the same regulatory function in Chinese cabbage. Taken together, our results demonstrated that CRISPR/Cas9 is an efficient tool for achieving targeted genome modifications and elucidating the biological functions of circadian clock genes in B. rapa, for both breeding and improvement.     

Condition monitoring scheme via one-class support vector machine and multivariate control charts

A condition-based maintenance (CBM) has been widely employed to reduce maintenance cost by predicting the health status of many complex systems in prognostics and health management (PHM) framework. Recently, multivariate control charts used in statistical process control (SPC) have been actively introduced as monitoring technology. In this paper, we propose a condition monitoring scheme to monitor the health status of the system of interest. In our condition monitoring scheme, we first define reference data set using one-class support vector machine (OC-SVM) to construct the control limit of multivariate control charts in phase I. Then, parametric control chart or non-parametric control chart is selected according to the results from multivariate normality tests. The proposed condition monitoring scheme is applied to sensor data of two anemometers to evaluate the performance of fault detection power.

     

Novel Maskless Bumping for 3D Integration

A novel, maskless, low‐volume bumping material, called solder bump maker, which is composed of a resin and low‐melting‐point solder powder, has been developed. The resin features no distinct chemical reactions preventing the rheological coalescence of the solder, a deoxidation of the oxide layer on the solder powder for wetting on the pad at the solder melting point, and no major weight loss caused by out‐gassing. With these characteristics, the solder was successfully wetted onto a metal pad and formed a uniform solder bump array with pitches of 120 µm and 150 µm.     

Environmental effects on the electrical behavior of pentacene thin-film transistors with a poly(methyl methacrylate) gate insulator

The electrical properties of top-contact pentacene thin-film transistors (TFTs) with a poly(methyl methacrylate) (PMMA) gate dielectric were analyzed in air and vacuum environments. Compared to the vacuum case, the pentacene TFT in air exhibited lower drain currents and more pronounced shifts in the threshold voltage upon reversal of the gate voltage sweep direction, together with a decrease in the field-effect mobility. These characteristic variations were explained in terms of two distinctive actions of polar H₂O molecules in pentacene TFT. H₂O molecules were suggested to diffuse under the source and drain contacts and interrupt the charge injection into the pentacene film, whereas those that permeate at the pentacene/PMMA interface retard hole depletion in and around the TFT channel. The diffusion process was much slower than the permeation process. The degraded TFT characteristics in air could be recovered mostly by storing the device under vacuum, which suggests that the air instability of TFTs is due mainly to the physical adsorption of H₂O molecules within the pentacene film.     

Pixel‐Structured Scintillator with Polymeric Microstructures for X‐Ray Image Sensors

We introduce a pixel‐structured scintillator realized on a flexible polymeric substrate and demonstrate its feasibility as an X‐ray converter when it is coupled to photosensitive elements. The sample was prepared by filling Gd₂O₂S:Tb scintillation material into a square‐pore‐shape cavity array fabricated with polyethylene. For comparison, a sample with the conventional continuous geometry was also prepared. Although the pixelated geometry showed X‐ray sensitivity of about 58% compared with the conventional geometry, the resolving power was improved by about 70% above a spatial frequency of 3 mm^?1. The spatial frequency at 10% of the modulation‐transfer function was about 6 mm^?1.     

Interconnection Technology Based on InSn Solder for Flexible Display Applications

A novel interconnection technology based on a 52InSn solder was developed for flexible display applications. The display industry is currently trying to develop a flexible display, and one of the crucial technologies for the implementation of a flexible display is to reduce the bonding process temperature to less than 150°C. InSn solder interconnection technology is proposed herein to reduce the electrical contact resistance and concurrently achieve a process temperature of less than 150°C. A solder bump maker (SBM) and fluxing underfill were developed for these purposes. SBM is a novel bumping material, and it is a mixture of a resin system and InSn solder powder. A maskless screen printing process was also developed using an SBM to reduce the cost of the bumping process. Fluxing underfill plays the role of a flux and an underfill concurrently to simplify the bonding process compared to a conventional flip‐chip bonding using a capillary underfill material. Using an SBM and fluxing underfill, a 20 μm pitch InSn solder SoP array on a glass substrate was successfully formed using a maskless screen printing process, and two glass substrates were bonded at 130°C.